Strengthening behavior of B doped TiC particles on an Al–Zn–Mg alloy
Source abstract
Abstract
Abstract In this work, a novel AlTiC–B master alloy containing B doped TiC (TiC(B)) particles was applied to an Al–Zn–Mg alloy and the 1 wt% TiC(B)/Al–Zn–Mg composite was synthesized. After hot extrusion, TiC(B) particles were found locating parallel to extruding direction. Both α–Al grains and precipitates in the composite have been refined. The yield strength and ultimate tensile strength of the composite are 455 MPa and 522 MPa, respectively, improved by 15.2% and 14.7% compared with the matrix alloy.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Aluminum Alloys Composites Properties · Aluminum Alloy Microstructure Properties · Microstructure and mechanical properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (18)
Show source-provided references
1. Corrosion behavior and mechanical properties of Al–Zn–Mg aluminum alloy weld10.1016/j.corsci.2017.05.007 ↗
2. Electroless tin coated hydroxyapatite reinforced Mg–Sn alloy composite for enhanced bio corrosion resistance and bioactivity10.1016/j.coco.2020.100372 ↗
3. Microstructural characterization of vanadium particles reinforced AA6063 aluminum matrix composites via friction stir processing with improved tensile strength and appreciable ductility10.1016/j.coco.2018.12.011 ↗
4. Enhanced micro–hardness and wear resistance of Al–15Si/TiC fabricated by selective laser melting10.1016/j.coco.2018.06.009 ↗
5. Microstructure and damping capacity of AA6061/graphite surface composites produced through friction stir processing10.1016/j.coco.2020.04.018 ↗
6. Microstructure and mechanical properties of an in–situ TiB2/Al–Zn–Mg–Cu–Zr composite fabricated by Melt–SHS process10.1016/j.msea.2018.02.025 ↗
7. Microstructure evolution and high temperature tensile properties of AlNp/Al–Fe composites induced by microalloying10.1016/j.jallcom.2019.02.069 ↗
8. Grain refining efficiency of Al–Ti–C alloy10.1016/j.jallcom.2005.11.059 ↗
9. Grain refining mechanism in the Al/Al–Ti–B system10.1016/j.actamat.2014.10.055 ↗
10. Preparation and synthesis thermokinetics of novel Al–Ti–C–La composite master alloys10.1016/j.jallcom.2018.10.241 ↗
11. Influence of matrix property and interfacial reaction on the mechanical performance and fracture mechanism of TiC reinforced Al matrix lamellar composites10.1016/j.msea.2020.138956 ↗
12. Reaction products of Al/TiC composites fabricated by the pressureless infiltration technique10.1007/s11661-005-0125-0 ↗
13. Physics of transition metal carbides10.1016/0025-5416(88)90474-0 ↗
14. Mechanism for Zr poisoning of Al–Ti–B based grain refiners10.1016/j.actamat.2018.10.056 ↗
15. Influence of a new AlTiC–B master alloy on the casting and extruding behaviors of 7050 alloys10.1016/j.jallcom.2019.153089 ↗
16. Precipitation behaviour of Al–Zn–Mg–Cu alloy and diffraction analysis from η′ precipitates in four variantsJ10.1016/j.jallcom.2014.05.061 ↗
17. Microstructure and mechanical properties at both room and high temperature of in–situ TiC reinforced Al–4.5Cu matrix nanocomposite10.1016/j.jallcom.2018.07.045 ↗
18. Effects of Ti additions on the nanostructure and creep properties of precipitation–strengthened Al–Sc alloys10.1016/j.actamat.2005.05.022 ↗