Performance of Pultruded FRP Connections under Static and Dynamic Loads
Source abstract
Abstract
The objective of this paper is to introduce a new design concept for con necting structural pultruded shapes. In this study, evaluation of the performance of a new class of pultruded fiber reinforced plastic (PFRP) beam-to-column connections under both static and dynamic loading conditions is presented. The connecting elements are com posed of newly developed FRP universal connectors (UC), PFRP threaded rods and nuts with and without high-strength epoxy adhesives. Experimental and analytical studies on the rotational stiffness and the ultimate flexural strength are presented. A simple linearized expression for each connection is given along with the corresponding flexural ultimate capacity. Average flexural stiffness coefficients, for design purpose, are also provided. Discussion on the different ultimate modes of failure is also provided. For the dynamic part of this study, results of experimental dynamic tests of PFRP structural shapes and connections is presented. The thin-walled elements used in this study were standard "off- the-shelf" pultruded 4 " × 4 " × 1/4 " H-beam and 2 " × 2 " × 1/2 " square tube. The test specimens were excited dynamically using both impact loading and shaking loads. Ex perimental modal analysis was used to extract the natural frequencies, modal damping, and mode shapes of the test specimens.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Structural Behavior of Reinforced Concrete · Structural Load-Bearing Analysis · Mechanical Behavior of Composites
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Civil Engineering Department Faculty of Engineering The Zagazig University (Banha Branch) Cairo, Egypt
Allied-Signal Automotive Inc. South Bend, IN 46634
Bedford Reinforced Plastics Bedford, PA 15522
References (16)
Show source-provided references
1. Bank, L.C.
2. Bank, L.C. · Modern Plastics Magazine · 1992 · 65
3. 1993
4. Gerstle, K.H. 1985. "Flexibly Connected Steel Frames," Chapter 7 in Steel Framed Structures: Stability and Strength, R. Narayagan, ed. Elsevier Applied Science, Essex, U.K. pp. 205-239.
5. 10.1016/0263-8223(90)90038-G10.1016/0263-8223(90)90038-G ↗
6. 1989
7. 10.1139/l87-00910.1139/l87-009 ↗
8. Mosallam A.S. · 1990
9. Mosallam, A.S. · Journal of Structural Engineering, The American Society of Civil Engineers · 1992 · 118 · 1937
10. Mosallam, A.S. 1993b. "Pultruded Composites: Materials for the 21st Century," in Plastics Composates for 21st-Century Construction, R. E. Chambers, ed. New York, NY: The American Society of Civil Engineers, pp. 23-55.
11. Mosallam, A.S.
12. Mosallam, A.S.
13. Mosallam, A.S.
14. 1984
15. 1985
16. Zahr, S.