journal article·2016-05

Bond stress–slip relationship between basalt fiber-reinforced polymer bars and concrete using a pull-out test

Dejian Shen, Binod Ojha, Xiang Shi, Hui Zhang, Jiaxin Shen

Publisher page

Abstract

The basalt fiber-reinforced polymer bar is one of the newly evolved materials expected to be used as a structural reinforcement because of its non-corrosive nature and abundant tensile strength properties. The bond stress–slip relationship between fiber-reinforced polymer bars and concrete is necessary to evaluate the load carrying capacity of concrete components or structures reinforced with fiber-reinforced polymer bars. Although the relationship between fiber-reinforced polymer bars and concrete has been studied, the bond stress–slip relationship between concrete and basalt fiber-reinforced polymer bars considering the effect of bar diameter and concrete strength is still lacking. This paper presents an experimental investigation on the bond behavior between basalt fiber-reinforced polymer bars with different diameters (10, 14, and 20 mm) and concrete with two different compressive strengths using a pull-out test. The test results showed that (1) the failure mode between basalt fiber-reinforced polymer bars and concrete was equally contributed from crushing of concrete and failure of basalt fiber-reinforced polymer surface and mainly from delaminated resin-rich surface for the specimens with the concrete compressive strength of 43.6 and 71.8 MPa, respectively; (2) the bond strength between basalt fiber-reinforced polymer bars and concrete decreased with the increase of bar diameter; (3) the slip corresponding to bond strength increased with the increase of diameter of basalt fiber-reinforced polymer bars; (4) the bond strength between the basalt fiber-reinforced polymer bars with diameter of 10 mm and concrete increased by 18.8% when the concrete strength increased by 64.7%; and (5) the formulas for bond stress–slip relationship between basalt fiber-reinforced polymer bars and concrete in consideration of the ratio of concrete cover depth and concrete compressive strength were proposed. The calculation results of the formulas indicated good accuracy with the experimental results.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Structural Behavior of Reinforced Concrete · Innovative concrete reinforcement materials · Concrete Corrosion and Durability

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

College of Civil and Transportation Engineering, Hohai University, Nanjing, China

Jiangsu Engineering Research Center of Crack Control in Concrete, Nanjing, China

References (61)

Show source-provided references
1. 10.1061/(ASCE)CC.1943-5614.000049110.1061/(ASCE)CC.1943-5614.0000491 ↗
2. 10.1016/j.compositesb.2014.12.03410.1016/j.compositesb.2014.12.034 ↗
3. 10.1016/j.conbuildmat.2012.09.01410.1016/j.conbuildmat.2012.09.014 ↗
4. 10.1016/j.msea.2008.11.06310.1016/j.msea.2008.11.063 ↗
5. Brik VB. Basalt fiber composite reinforcement for concrete, Washington, DC: Transportation Research Board, 1997, pp. 21–35.
6. 10.1016/j.compositesb.2005.02.00210.1016/j.compositesb.2005.02.002 ↗
7. Brik VB. Advanced concept concrete using basalt fiber/BF composite rebar reinforcement. IDEA Project 86, Washington, DC: Transportation Research Board, 2003, pp. 71–71.
8. 10.1007/s11595-013-0731-410.1007/s11595-013-0731-4 ↗
9. 10.1023/A:102387980742510.1023/A:1023879807425 ↗
10. Gore R · J Inform Knowl Res Civil Eng · 2013 · 2 · 117
11. Chikhradze NM, Japaridze LA and Abashidze GS. Properties of basalt plastics and of composites reinforced by hybrid fibers in operating conditions . Morocco: Intech, 2012, pp.221–246.10.5772/48289 ↗
12. 10.1016/j.msea.2010.04.02110.1016/j.msea.2010.04.021 ↗
13. 10.1007/s10692-008-9044-310.1007/s10692-008-9044-3 ↗
14. 10.3144/expresspolymlett.2011.4310.3144/expresspolymlett.2011.43 ↗
15. 10.1061/(ASCE)CC.1943-5614.000034910.1061/(ASCE)CC.1943-5614.0000349 ↗
16. 10.4028/www.scientific.net/AMM.174-177.83010.4028/www.scientific.net/AMM.174-177.830 ↗
17. Saad SM · Int J Eng Res Gen Sci · 2015 · 3 · 686
18. 10.1061/(ASCE)CC.1943-5614.000056810.1061/(ASCE)CC.1943-5614.0000568 ↗
19. 10.1016/j.conbuildmat.2015.02.01610.1016/j.conbuildmat.2015.02.016 ↗
20. 10.1177/073168441557453910.1177/0731684415574539 ↗
21. High C, Seliem HM, El-Safty A, et al. Use of BFRP bars as flexural reinforcement. In: Proceedings of the 7th international conference on FRP composites in civil engineering , British Columbia, Canada, 20–22 August 2014.
22. 10.1016/S0950-0618(98)00027-010.1016/S0950-0618(98)00027-0 ↗
23. Belarbi A and Wang HZ. Bond-slip response of FRP reinforcing bars in fiber reinforced concrete under direct pullout. In : International conference on fiber, high performance concretes and smart materials , Chennai, India, 2004, pp.409–419.
24. 10.1061/(ASCE)1090-0268(2005)9:3(203)10.1061/(ASCE)1090-0268(2005)9:3(203) ↗
25. Larrard DF · ACI Mater J · 1993 · 90 · 333
26. 10.1016/j.compstruct.2011.10.02610.1016/j.compstruct.2011.10.026 ↗
27. Guo ZG, Cao SY, Sun WM, et al. Experimental study on bond stress-slip behaviour between FRP sheets and concrete. In: Proceedings of the international symposium on bond behaviour of FRP in structures (BBFS 2005) Hong Kong, China, 7–9 December 2005, pp.77–84. Polytechnic University.
28. 10.1016/j.cemconcomp.2008.05.00610.1016/j.cemconcomp.2008.05.006 ↗
29. Lee JY · 2007
30. Faza SS and Gangarao HVS. Bending and bond behavior of concrete beams reinforced with plastic rebars. In: Third bridge engineering conference , Washington DC, 1991, pp.185–193. Transportation Research Board.
31. Quayyum S. Bond behaviour of fibre reinforced polymer (FRP) rebars in concrete . Master Thesis, Bangladesh University of Engineering & Technology, Bangladesh, 2010.
32. 10.1061/(ASCE)1090-0268(2004)8:2(173)10.1061/(ASCE)1090-0268(2004)8:2(173) ↗
33. 10.1016/j.compositesb.2007.11.00510.1016/j.compositesb.2007.11.005 ↗
34. 10.1061/(ASCE)0899-1561(2007)19:3(205)10.1061/(ASCE)0899-1561(2007)19:3(205) ↗
35. 10.1061/(ASCE)1090-0268(2000)4:1(24)10.1061/(ASCE)1090-0268(2000)4:1(24) ↗
36. 10.1016/j.aej.2014.03.01210.1016/j.aej.2014.03.012 ↗
37. 10.1016/S1359-8368(02)00052-510.1016/S1359-8368(02)00052-5 ↗
38. 10.1061/(ASCE)1090-0268(1997)1:2(40)10.1061/(ASCE)1090-0268(1997)1:2(40) ↗
39. 10.1177/07316844950140060110.1177/073168449501400601 ↗
40. 10.1016/S1359-8368(02)00051-310.1016/S1359-8368(02)00051-3 ↗
41. 10.1016/j.conbuildmat.2005.08.00810.1016/j.conbuildmat.2005.08.008 ↗
42. American Concrete Institute (ACI) · 2004
43. 10.1016/j.conbuildmat.2008.04.01110.1016/j.conbuildmat.2008.04.011 ↗
44. Chitsazan I · J Civil Eng Constr Technol · 2010 · 1 · 27
45. 10.1061/(ASCE)1090-0268(2001)5:2(114)10.1061/(ASCE)1090-0268(2001)5:2(114) ↗
46. 10.1016/j.compositesb.2004.05.00410.1016/j.compositesb.2004.05.004 ↗
47. Benmokrane B, Wang P, Gentry TR, et al. Tests methods to determine properties of FRP rods for concrete structures. In: Composites in construction: a reality. 2001, pp.75–83. Capri, Italy: American Society of Civil Engineers.10.1061/40596(264)9 ↗
48. 10.1016/j.compositesb.2007.03.00810.1016/j.compositesb.2007.03.008 ↗
49. EI Refai A · J Compos Constr · 2015 · 19 · 1
50. EI Refai A · J Compos Constr · 2014 · 19
51. 10.1007/BF0290507310.1007/BF02905073 ↗
52. 10.1680/macr.1999.51.4.22910.1680/macr.1999.51.4.229 ↗
53. De Lorenzis L · ACI Mater J · 2001 · 98 · 256
54. Albarwary IHM · Eur Sci J · 2013 · 9 · 255
55. 10.1061/(ASCE)1090-0268(2000)4:2(39)10.1061/(ASCE)1090-0268(2000)4:2(39) ↗
56. 10.1177/002199831143199410.1177/0021998311431994 ↗
57. 10.1061/(ASCE)1090-0268(2009)13:2(82)10.1061/(ASCE)1090-0268(2009)13:2(82) ↗
58. 10.1016/j.conbuildmat.2010.02.00610.1016/j.conbuildmat.2010.02.006 ↗
59. 10.1016/j.compositesb.2009.07.00310.1016/j.compositesb.2009.07.003 ↗
60. American Concrete Institute (ACI) · 2006
61. Eligehausen R · Tech Chamber of Greece · 1982 · 4 · 69