Effects of initial fiber length and fiber length distribution on the properties of carbon-fiber-reinforced-polypropylene composites
Source abstract
Abstract
In this study, short carbon fiber-reinforced polypropylene composites with three different initial carbon fiber lengths were prepared by using extrusion compounding and injection molding techniques. The physical and morphological properties of the prepared short carbon fiber-reinforced composites were investigated by means of tensile test, differential scanning calorimetry and scanning electron microscopy. Final fiber length distributions of composites were also determined by using an image analyzing program. It was found that the maximum number of fibers was observed in the range from 51 to 100 µm. Number average final fiber lengths were calculated between 230 and 280 µm. Regardless of the used initial carbon fiber length, tensile strength and modulus values of the composites increased with the increasing carbon fiber content. It has been concluded that the initial fiber length at the studied range did not have any significant effect on the properties of composites.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Fiber-reinforced polymer composites · Natural Fiber Reinforced Composites · Mechanical Behavior of Composites
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Kocaeli University, Chemical Engineering Department Umuttepe Campus, Izmit/Kocaeli, Turkey
References (27)
Show source-provided references
1. 10.1016/j.matdes.2009.10.03110.1016/j.matdes.2009.10.031 ↗
2. 10.1080/0360255770854503310.1080/03602557708545033 ↗
3. 10.1016/0266-3538(85)90090-910.1016/0266-3538(85)90090-9 ↗
4. 10.1016/0010-4361(79)90012-010.1016/0010-4361(79)90012-0 ↗
5. 10.1002/app.2087410.1002/app.20874 ↗
6. 10.1016/S1359-835X(00)00068-310.1016/S1359-835X(00)00068-3 ↗
7. 10.1023/A:100480253025310.1023/A:1004802530253 ↗
8. 10.1002/app.1291610.1002/app.12916 ↗
9. 10.1016/j.matdes.2008.05.00510.1016/j.matdes.2008.05.005 ↗
10. 10.1016/S0924-0136(99)00065-510.1016/S0924-0136(99)00065-5 ↗
11. 10.1016/j.cap.2010.06.01710.1016/j.cap.2010.06.017 ↗
12. 10.1002/app.2681810.1002/app.26818 ↗
13. 10.1002/pc.75010010310.1002/pc.750100103 ↗
14. 10.1016/j.polymertesting.2007.04.00310.1016/j.polymertesting.2007.04.003 ↗
15. 10.1016/j.compscitech.2004.07.01010.1016/j.compscitech.2004.07.010 ↗
16. 10.1002/app.1160910.1002/app.11609 ↗
17. 10.1080/0360255080189732310.1080/03602550801897323 ↗
18. 10.1016/S0266-3538(96)00072-310.1016/S0266-3538(96)00072-3 ↗
19. ASTM D 638-10: 2010. Standard test method for tensile properties of plastics
20. ASTM D 785-08: 2008. Standard test method for Rockwell hardness of plastics and electrical insulating materials
21. 10.1007/s10853-009-4204-210.1007/s10853-009-4204-2 ↗
22. 10.1002/app.2735410.1002/app.27354 ↗
23. Cox HL · J Appl Phys · 1951 · 3 · 72
24. 10.1016/S1359-835X(97)00117-610.1016/S1359-835X(97)00117-6 ↗
25. Ozkoc G, Bayram G, Bayramli EShort glass fiber reinforced ABS and ABS/PA6 composites: processing and characterization. 200526745–755
26. 10.1002/1097-4628(20010103)79:1<125::AID-APP150>3.0.CO;2-D10.1002/1097-4628(20010103)79:1<125::AID-APP150>3.0.CO;2-D ↗
27. 10.1002/sia.307210.1002/sia.3072 ↗