journal article·2012-12

A review of multiscale composite manufacturing and challenges

Micah CL McCrary-Dennis, Okenwa I Okoli

Publisher page

Abstract

As the utilization of advanced composites in structural applications grows, the need for improving their through-thickness properties becomes imperative. Although the behavior of composite laminates under structural and thermal loads has received much attention with their growth in safety critical structures, more effort needs to go into selectively improving their electrical and thermal conductivities. Additionally, the ability to manufacture composite structures that can inherently monitor their own health will be exceedingly beneficial. This paper provides an overview of advances made towards multiscale composite manufacturing. Multiscale composites, especially with the use of carbon nanotubes, have been sought to provide enhanced structural (through-thickness) properties and increased electrical and thermal conductivities. This report will review the state of art in the manufacturing of multiscale composites, their scalability, and their inherent potential for multifunctionality. Current techniques mostly result in the application of carbon nanotubes throughout the entire laminates, rather than in selected areas. Subsequently, one of the main barriers, to the widespread use of carbon nanotube-applied composites, is an efficient mass-producible manufacturing process. This paper attempts to highlight the current knowledge gaps in this critical area of composites manufacturing.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Carbon Nanotubes in Composites · Smart Materials for Construction · Dielectric materials and actuators

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

High-Performance Materials Institute, Florida A&M University – Florida State University, College of Engineering, Tallahassee, FL, USA

References (100+)

Show source-provided references
1. 10.1021/cm020975d10.1021/cm020975d ↗
2. 10.1016/S1369-7021(04)00448-110.1016/S1369-7021(04)00448-1 ↗
3. Ware G, Park Y-B, Zhang C, et al. Processing and characterization of epoxy/carbon fiber/carbon nanotube multiscale composites fabricated using VARTM. In: SAMPE 2007 fall technical conference , Cincinnati, OH, 29 October–1 November 2007.
4. Kim M · 2009 · 153
5. 10.1021/la062743p10.1021/la062743p ↗
6. 10.1016/j.compscitech.2008.02.02010.1016/j.compscitech.2008.02.020 ↗
7. 10.1016/j.compscitech.2008.10.01910.1016/j.compscitech.2008.10.019 ↗
8. 10.1088/0034-4885/69/6/R0510.1088/0034-4885/69/6/R05 ↗
9. 10.1016/j.matdes.2006.09.02210.1016/j.matdes.2006.09.022 ↗
10. 10.1016/j.carbon.2005.12.00410.1016/j.carbon.2005.12.004 ↗
11. 10.1016/j.carbon.2004.01.06710.1016/j.carbon.2004.01.067 ↗
12. 10.1016/j.matlet.2011.05.06710.1016/j.matlet.2011.05.067 ↗
13. 10.1016/j.compositesa.2010.07.00310.1016/j.compositesa.2010.07.003 ↗
14. 10.1021/ma020890y10.1021/ma020890y ↗
15. 10.1016/j.compositesa.2010.10.00510.1016/j.compositesa.2010.10.005 ↗
16. 10.1016/j.msea.2008.12.04410.1016/j.msea.2008.12.044 ↗
17. 10.1016/0008-6223(95)00017-810.1016/0008-6223(95)00017-8 ↗
18. 10.1016/S0266-3538(01)00094-X10.1016/S0266-3538(01)00094-X ↗
19. 10.1177/002199830606732110.1177/0021998306067321 ↗
20. 10.1098/rsta.2004.143010.1098/rsta.2004.1430 ↗
21. 10.1016/j.compositesa.2009.05.01010.1016/j.compositesa.2009.05.010 ↗
22. 10.1021/nl015651n10.1021/nl015651n ↗
23. 10.1002/1097-4628(20010103)79:1<125::AID-APP150>3.0.CO;2-D10.1002/1097-4628(20010103)79:1<125::AID-APP150>3.0.CO;2-D ↗
24. 10.1016/j.compscitech.2004.08.00310.1016/j.compscitech.2004.08.003 ↗
25. 10.1023/A:102510910351110.1023/A:1025109103511 ↗
26. 10.1002/app.120010.1002/app.1200 ↗
27. 10.1016/j.polymer.2005.12.06410.1016/j.polymer.2005.12.064 ↗
28. 10.1016/S1359-835X(99)00018-410.1016/S1359-835X(99)00018-4 ↗
29. 10.1063/1.12291110.1063/1.122911 ↗
30. 10.1016/j.msea.2006.01.07410.1016/j.msea.2006.01.074 ↗
31. 10.1016/0254-0584(86)90006-410.1016/0254-0584(86)90006-4 ↗
32. 10.1016/j.compscitech.2005.01.01410.1016/j.compscitech.2005.01.014 ↗
33. 10.3139/978344643413410.3139/9783446434134 ↗
34. 10.1016/j.compscitech.2004.04.00210.1016/j.compscitech.2004.04.002 ↗
35. 10.1016/j.compscitech.2006.07.00110.1016/j.compscitech.2006.07.001 ↗
36. 10.1088/0022-3727/36/5/32310.1088/0022-3727/36/5/323 ↗
37. Askland D · 2003
38. Chawla K · 199810.1007/978-1-4757-2966-5 ↗
39. 10.1016/j.compositesa.2010.12.01310.1016/j.compositesa.2010.12.013 ↗
40. Mallick P · 2008
41. 10.1021/cm048139m10.1021/cm048139m ↗
42. 10.1016/j.carbon.2007.08.01810.1016/j.carbon.2007.08.018 ↗
43. 10.1088/0957-4484/18/27/27570810.1088/0957-4484/18/27/275708 ↗
44. 10.1016/j.compscitech.2007.09.00510.1016/j.compscitech.2007.09.005 ↗
45. Allen MP and Tildesley DJ. Computer simulation of liquids By M. P. Allen (University of Bristol) and D. J. Tildesley (Southampton University). Clarendon Press, Oxford, UK; Oxford University Press, New York; 1987.xix 385 pp. ISBN 0470-20812-0 . Oxford: Oxford University Press, 1989.
46. Frenkel D · 2002
47. 10.1063/1.169911410.1063/1.1699114 ↗
48. 10.1209/0295-5075/19/3/00110.1209/0295-5075/19/3/001 ↗
49. 10.1016/j.progpolymsci.2007.09.00210.1016/j.progpolymsci.2007.09.002 ↗
50. 10.1016/j.progpolymsci.2008.02.00310.1016/j.progpolymsci.2008.02.003 ↗
51. Odegard GM · Rev Adv Mater Sci · 2005 · 9 · 34
52. 10.1016/S0039-6028(02)02532-310.1016/S0039-6028(02)02532-3 ↗
53. 10.1016/0001-6160(73)90064-310.1016/0001-6160(73)90064-3 ↗
54. 10.1016/0167-6636(87)90005-610.1016/0167-6636(87)90005-6 ↗
55. 10.1016/j.polymer.2004.11.02210.1016/j.polymer.2004.11.022 ↗
56. 10.1002/pen.76016051210.1002/pen.760160512 ↗
57. 10.1016/j.carbon.2005.07.00510.1016/j.carbon.2005.07.005 ↗
58. 10.1115/1.289603810.1115/1.2896038 ↗
59. 10.1098/rspa.1957.013310.1098/rspa.1957.0133 ↗
60. 10.1007/978-94-009-3489-410.1007/978-94-009-3489-4 ↗
61. 10.1016/j.compscitech.2006.01.01310.1016/j.compscitech.2006.01.013 ↗
62. 10.1016/S0009-2614(02)00948-X10.1016/S0009-2614(02)00948-X ↗
63. 10.1016/j.mechmat.2005.06.02910.1016/j.mechmat.2005.06.029 ↗
64. Mazumder SK. Composites manufacturing, materials, product and process engineering , New York: CRC Press, 2002.
65. 10.1007/BF0103652310.1007/BF01036523 ↗
66. 10.1177/073168440935910310.1177/0731684409359103 ↗
67. TPI Technology I. An overview of the SCRIMP™ technology , 2005. Available at: http://www.tpicomposites.com/media/5997/scrimp_overview_2005.pdf (accessed 1 December 2011).
68. 10.1016/j.compositesa.2008.01.01510.1016/j.compositesa.2008.01.015 ↗
69. Octeau MA, Yousefpour A and Hojjati M. Proceedure manual for using resin transfer molding (RTM) manufacturing set-up. LM-AMTC-0025 , August 2004.
70. Fielding JC · 2004
71. Hussain F · J Compos Mater · 2005 · 37 · 1821
72. 10.1016/j.carbon.2009.09.01410.1016/j.carbon.2009.09.014 ↗
73. 10.1007/s10853-006-1370-310.1007/s10853-006-1370-3 ↗
74. Hosur MV, Chowdhury FH, Jeelani S. Studies on flexural and thermal response of hand-layup carbon/epoxy composites, Tuskegee, AL: Tuskegee University, 2006, 8–8.
75. 10.1016/1359-835X(96)00008-510.1016/1359-835X(96)00008-5 ↗
76. 10.1016/S1359-835X(03)00201-X10.1016/S1359-835X(03)00201-X ↗
77. Parker L, Hoffman K, Okoli OI, Enhancing flow of CNT-doped resins in the manufacture of multiscale composites using the RIDFT process. Composites 2011-the composites exhibition and convention, Fort Lauderdale, FL: American Composites Manufacturers Association, 2011; 2–4 February 2011.
78. Roy S, Hussain F, Lu H, et al. Characterization and modeling of strength enhancement mechanism in polmer/clay nanocomposites. In: Proceedings of the 46th AIAA-SDM Conference , Austin, TX (Website), 18-21 April 2005.10.2514/6.2005-1853 ↗
79. 10.1177/089270570707960410.1177/0892705707079604 ↗
80. OSHA. Polymer matrix materials: advanced composites . In: OSHA (ed). Washington, DC, 1999.
81. Spindler-Ranta S and Bakis CE. Carbon nanotube reinforcement of a filament winding resin. In: 47th international SAMPE symposium and exhibition , Long Beach, CA, USA, 2002, pp.1775–1787.
82. Mahfuz H, Baseer MA and Zeelani S. Fabrication, characterization and mechanical properties of nano phased carbon prepreg laminates. SAMPE , 2005; 41: 40–48.
83. 10.1038/363603a010.1038/363603a0 ↗
84. 10.1021/nl050634+10.1021/nl050634+ ↗
85. 10.1016/j.compscitech.2008.05.02310.1016/j.compscitech.2008.05.023 ↗
86. Suraya AR · J Eng Sci Technol · 2009 · 4 · 400
87. 10.1016/j.compscitech.2004.11.00310.1016/j.compscitech.2004.11.003 ↗
88. 10.1016/S1359-8368(02)00012-410.1016/S1359-8368(02)00012-4 ↗
89. 10.1088/0022-3727/35/16/10310.1088/0022-3727/35/16/103 ↗
90. 10.1016/j.compositesb.2006.02.02010.1016/j.compositesb.2006.02.020 ↗
91. 10.1007/s12034-007-0061-210.1007/s12034-007-0061-2 ↗
92. 10.1016/j.compscitech.2004.04.00210.1016/j.compscitech.2004.04.002 ↗
93. 10.1063/1.146688010.1063/1.1466880 ↗
94. 10.1016/j.compscitech.2005.04.00210.1016/j.compscitech.2005.04.002 ↗
95. 10.1016/j.compscitech.2005.06.00910.1016/j.compscitech.2005.06.009 ↗
96. 10.1016/S0266-3538(03)00060-510.1016/S0266-3538(03)00060-5 ↗
97. Ratkovich AS. Controlling zinc oxide particle growth using various solutions conditions, Minnesota, MN: University of Minnesota - Twin Cities, 2008, 132–132.
98. 10.1007/b13716210.1007/b137162 ↗
99. Koo JH · 2006
100. 10.1016/S1359-6462(03)00173-810.1016/S1359-6462(03)00173-8 ↗