Strain rate effect on bond stress–slip relationship between basalt fiber-reinforced polymer sheet and concrete
Source abstract
Abstract
Reinforced concrete structures that are strengthened with fiber-reinforced polymers frequently suffer dynamic loadings. The success of this strengthening method depends on the effectiveness of the bond between the fiber-reinforced polymer sheet and concrete. Determining the bond behavior between the fiber-reinforced polymer and concrete substrate is an important issue in technology because the typical failure mode of fiber-reinforced polymer-to-concrete joints is debonding of the composite from the concrete substrate. Although numerous experimental studies have investigated this static bond behavior, experimental data concerning dynamic tests on maximum bond stress, ultimate load, and the bond–slip relationship of the interface between basalt fiber-reinforced polymer sheets and concrete under different strain rates are lacking. This study presents an experimental investigation of the dynamic performance between the basalt fiber-reinforced polymer sheet and concrete under different strain rates. Double-lap shear specimens were used in the tests. The dynamic test results are reported and discussed in this paper to evaluate and compare the influence of the strain rate on the dynamic maximum bond stress, ultimate load, as well as the bond–slip relationship between the basalt fiber-reinforced polymer sheets and concrete. The data show that the maximum bond stress, ultimate load, and bond–slip relationship are sensitive to the strain rate. The test results indicate that (1) the dynamic maximum bond stress of the basalt fiber-reinforced polymer–concrete interface increases with the increase of the strain rate; (2) the dynamic ultimate load of the basalt fiber-reinforced polymer–concrete interface increases with the increasing strain rate as a logarithmic function; and (3) the strain rate has no effect on the slip at the maximum bond stress, and the dynamic bond–slip relationships of basalt fiber-reinforced polymer–concrete interface under different strain rates are similar. The calculation models of the dynamic maximum bond stress, ultimate load, and bond–slip relationship were established through a regression analysis of the dynamic test data while considering the influence of the strain rate.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Structural Behavior of Reinforced Concrete · Innovative concrete reinforcement materials · Structural Response to Dynamic Loads
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
College of Civil and Transportation Engineering, Hohai Univ., Nanjing, China
State Key Laboratory for Disaster Reduction in Civil Engineering, Tongji Univ., Shanghai, China
References (50)
Show source-provided references
1. 10.1016/j.compstruct.2012.04.02510.1016/j.compstruct.2012.04.025 ↗
2. 10.1016/j.compositesb.2013.12.07510.1016/j.compositesb.2013.12.075 ↗
3. 10.1177/073168441139816510.1177/0731684411398165 ↗
4. 10.1016/j.ijnonlinmec.2013.12.00310.1016/j.ijnonlinmec.2013.12.003 ↗
5. 10.1016/j.engstruct.2005.01.01410.1016/j.engstruct.2005.01.014 ↗
6. 10.1016/j.compositesb.2011.04.01610.1016/j.compositesb.2011.04.016 ↗
7. 10.1177/073168440809196110.1177/0731684408091961 ↗
8. Neubauer U · 1997 · 109
9. 10.1016/j.compositesb.2013.10.07510.1016/j.compositesb.2013.10.075 ↗
10. Saiidi MS, Johnson R and Maragakis E. Strain rate effects on strength of unidirectional FRP fabrics and bond to concrete. In: Proceedings of the third international conference on FRP composites in civil engineering, 2006, pp.79–82. Miami, FL: Florida International University.
11. Shi JW · China Civil Eng J · 2012 · 45 · 99
12. Tanaka T · 1996
13. Hiroyuki Y and Wu Z. Analysis of debonding fracture properties of CFS strengthened member subject to tension. In: Proceedings of third international symposium on non-metallic (FRP) reinforcement for concrete structures , Sapporo, Japan, 1997, vol. 1, pp.287–294. Tokyo: Japan Concrete Institute.
14. 10.1061/(ASCE)1090-0268(2008)12:2(180)10.1061/(ASCE)1090-0268(2008)12:2(180) ↗
15. 10.1061/(ASCE)1090-0268(2007)11:2(149)10.1061/(ASCE)1090-0268(2007)11:2(149) ↗
16. Yang YX · J Build Struct · 2001 · 22 · 36
17. Maeda T, Asano Y, Sato Y, et al. A study on bond mechanism of carbon fiber sheet. In: Proceedings of the third international symposium on non-metallic (FRP) reinforcement for concrete structures , Sapporo, Japan, 1997, vol. 1, pp.279–285. Tokyo: Japan Concrete Institute.
18. 10.1061/(ASCE)1090-0268(1998)2:4(195)10.1061/(ASCE)1090-0268(1998)2:4(195) ↗
19. Nakaba K · ACI Struct J · 2001 · 98 · 359
20. 10.3130/aijs.62.75_510.3130/aijs.62.75_5 ↗
21. Lorenzis LD · ACI Mater J · 2001 · 98 · 256
22. 10.1016/j.conbuildmat.2014.06.03710.1016/j.conbuildmat.2014.06.037 ↗
23. Japan Concrete Institute (JCI). Technical report of technical committee on retrofit technology. In: Proceedings of the international symposium on latest achievement of technology and research on retrofitting concrete structures , pp. 4–42, Tokyo: Japan Concrete Institute, 2003.
24. 10.1061/(ASCE)1090-0268(2007)11:2(138)10.1061/(ASCE)1090-0268(2007)11:2(138) ↗
25. 10.1061/(ASCE)0733-9445(2001)127:7(784)10.1061/(ASCE)0733-9445(2001)127:7(784) ↗
26. Italian Society Research Society. Instructions for the design, execution and control of strengthening measures through fiber-reinforced composites. CNR-DT 200/04. Rome: Italian Society Research Society, 2004.
27. Savioa M, Ferracuti B and Mazzotti C. Non-linear bond-slip law for FRP-concrete interface. In: Proceedings of the sixth international symposium on FRP reinforcement for concrete structures. Singapore: World Scientific Publications, 2003, pp.163–172.10.1142/9789812704863_0013 ↗
28. 10.1061/(ASCE)1090-0268(2000)4:1(24)10.1061/(ASCE)1090-0268(2000)4:1(24) ↗
29. 10.1061/(ASCE)1090-0268(2009)13:1(53)10.1061/(ASCE)1090-0268(2009)13:1(53) ↗
30. 10.1177/073168441038663610.1177/0731684410386636 ↗
31. Tomlinson D and Fam A. Performance of concrete beams reinforced with basalt FRP for flexure and shear. J Compos Constr . Epub ahead of print 24 June 2014. http://ascelibrary.org/doi/abs/10.1061/(ASCE)CC.1943-5614.0000491.10.1061/(ASCE)CC.1943-5614.0000491 ↗
32. Brik V · 1997
33. 10.1016/j.compositesb.2005.02.00210.1016/j.compositesb.2005.02.002 ↗
34. 10.1061/(ASCE)CC.1943-5614.000034910.1061/(ASCE)CC.1943-5614.0000349 ↗
35. Chinese Standard GB/T 50081 · 2002
36. Chinese Standard GB/T 3354. Test method for tensile properties of oriented fiber reinforced plastics (GB/T 3354-1999) . Beijing: General Administration of Quality Supervision, Inspection and Quarantine of People’s Republic of China, 1999 (in Chinese).
37. Japan Society of Civil Engineers (JSCE). Test method for bond properties of continuous fiber sheets to concrete (JSCE-E-543-2000) . Tokyo: Research Committee on Upgrading of Concrete Structures with Use of Continuous Fiber Sheets, 2001.
38. 10.1061/(ASCE)0733-9399(2006)132:9(914)10.1061/(ASCE)0733-9399(2006)132:9(914) ↗
39. 10.1061/(ASCE)1090-0268(2007)11:4(419)10.1061/(ASCE)1090-0268(2007)11:4(419) ↗
40. 10.1016/j.compstruct.2006.07.00110.1016/j.compstruct.2006.07.001 ↗
41. 10.1061/(ASCE)CC.1943-5614.000041810.1061/(ASCE)CC.1943-5614.0000418 ↗
42. Kulkarni SM · ACI Struct J · 1998 · 95 · 705
43. Girgin ZC · ACI Struct J · 2007 · 104 · 278
44. 10.1061/(ASCE)CC.1943-5614.000006210.1061/(ASCE)CC.1943-5614.0000062 ↗
45. 10.1016/S0266-3538(97)00092-410.1016/S0266-3538(97)00092-4 ↗
46. Huang CK · Nanjing Hydraulic Res Inst · 1997 · 13 · 17
47. Shen DJ · China Civil Eng J · 2010 · 43 · 14
48. Yin FF. Study on interfacial properties of Basalt fiber reinforced polymer and concrete. MsD thesis, PRC: Hohai Univ, 2014 (in Chinese).
49. 10.1016/0008-8846(73)90096-310.1016/0008-8846(73)90096-3 ↗
50. 10.1061/(ASCE)0733-9445(2003)129:6(717)10.1061/(ASCE)0733-9445(2003)129:6(717) ↗