Experimental and numerical investigation of flexural behavior of carbon fiber reinforced aluminum laminates
Source abstract
Abstract
Fiber metal laminates (FML) combine the strength of carbon fiber composite layer with ductility of the aluminum layer for desirable mechanical characteristics. For these composites, progressive failure behavior can be complex and require attention. In this study, two carbon fiber reinforced aluminum laminates (CARRAL) with a 3/2 configuration, with aluminum in the outer layer for the first case and one with carbon fiber composite layer in the outer layer were prepared using a vacuum press without any adhesive layer between the layers—a significant departure from similar aerospace materials. Epoxy from the prepreg provides adequate adhesion during consolidation in these lower cost FMLs with a pressure level of 0.35 MPa. Three-point flexural behaviors of these two material systems were evaluated under static loading and failure modes were recorded. Primary failure modes observed were crack in lower aluminum layer, carbon fiber (CFRP) layer fracture and delamination between upper aluminum and CFRP layer. A major contribution of this study was to predict the flexural response of these FMLs using LS-DYNA finite element code. Modeling the progressive damage behavior of FML by considering stress based material failure and shear stress based delamination failure between adjacent layers were key aspects of finite element modeling. Predicted mechanical behavior matches well with experimental results and the progressive nature of damage are recovered in the model.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Mechanical Behavior of Composites · Fiber-reinforced polymer composites · Smart Materials for Construction
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Department of Mechanical Engineering, Wayne State University, Detroit, USA
References (44)
Show source-provided references
1. 10.1080/1042691940893490510.1080/10426919408934905 ↗
2. 10.1016/j.compositesb.2005.06.00210.1016/j.compositesb.2005.06.002 ↗
3. 10.1111/j.1460-2695.1997.tb01512.x10.1111/j.1460-2695.1997.tb01512.x ↗
4. 10.1177/073168440403979610.1177/0731684404039796 ↗
5. 10.4028/www.scientific.net/KEM.141-143.23510.4028/www.scientific.net/KEM.141-143.235 ↗
6. 10.1016/j.compositesb.2008.01.00710.1016/j.compositesb.2008.01.007 ↗
7. 10.1016/j.msea.2006.12.13510.1016/j.msea.2006.12.135 ↗
8. Glare BTF. A contribution to aircraft certification issues on strengths properties in non-damaged and fatigue damaged GLARE® structures . PhD Thesis, Delft University of Technology, Netherlands, 2004.
9. De Vries T. Blunt and sharp notch behaviour of glare laminates . TU Delft, Delft University of Technology, Netherlands, 2001.
10. 10.1016/S0263-8223(03)00096-510.1016/S0263-8223(03)00096-5 ↗
11. 10.1177/089270571140816510.1177/0892705711408165 ↗
12. 10.1111/j.1460-2695.2011.01595.x10.1111/j.1460-2695.2011.01595.x ↗
13. 10.1016/j.msea.2010.11.05910.1016/j.msea.2010.11.059 ↗
14. 10.1016/j.compositesa.2009.07.01410.1016/j.compositesa.2009.07.014 ↗
15. 10.1243/09544100JAERO35310.1243/09544100JAERO353 ↗
16. Esfandiar H · Int J Adv Des Manuf Technol · 2012 · 5 · 61
17. 10.1088/0965-0393/13/3/01010.1088/0965-0393/13/3/010 ↗
18. 10.1016/j.mspro.2014.07.24210.1016/j.mspro.2014.07.242 ↗
19. 10.1590/S1516-1439200600030000210.1590/S1516-14392006000300002 ↗
20. 10.1177/002199831453131010.1177/0021998314531310 ↗
21. 10.1016/0010-4361(91)90672-410.1016/0010-4361(91)90672-4 ↗
22. 10.1016/S0266-3538(96)00107-810.1016/S0266-3538(96)00107-8 ↗
23. 10.1016/j.matlet.2006.04.04310.1016/j.matlet.2006.04.043 ↗
24. Zhao J · Proc SPIE · 2013
25. 10.1163/156856104270837710.1163/1568561042708377 ↗
26. Bieniaś J · Compos Theory Pract · 2012 · 12 · 193
27. 10.1016/j.compstruct.2014.09.05410.1016/j.compstruct.2014.09.054 ↗
28. 10.1016/j.acme.2014.09.00710.1016/j.acme.2014.09.007 ↗
29. 10.1016/j.compositesa.2007.01.01710.1016/j.compositesa.2007.01.017 ↗
30. 10.1016/j.compscitech.2011.04.00610.1016/j.compscitech.2011.04.006 ↗
31. 10.1016/j.compstruct.2011.01.01810.1016/j.compstruct.2011.01.018 ↗
32. 10.1016/j.compstruct.2005.11.06210.1016/j.compstruct.2005.11.062 ↗
33. 10.1177/00219983910250010110.1177/002199839102500101 ↗
34. 10.1016/j.compstruct.2014.03.04610.1016/j.compstruct.2014.03.046 ↗
35. ASTM D790-15e1. Standard Test Methods for Flexural Properties of Unreinforced and Reinforced Plastics and Electrical Insulating Materials . West Conshohocken, PA: ASTM International, 2015.
36. 10.1177/00219983870210090410.1177/002199838702100904 ↗
37. Livermore Software Technology Corporation. LS DYNA Version 971, Keyword User’s Manual, Volume-II, Material Models.
38. Bala S · 2010
39. Loikkanen M, Praveen G and Powell D. Simulation of ballistic impact on composite panels. In: 10th international LS-DYNA users conference , Dearborn, Michigan USA. 2008, p. 1–12.
40. Lemmen PPM, Meijer GJ and Rasmussen EA. Dynamic behaviour of composite structures (DYCOSS) Failure Prediction Tool. In: 70th shock and vibration symposium , Albuquerque, NM, USA, 1999.
41. Meijer GJ, Rasmussen EA, Lemmen PPM, et al. Dynamic behavior of composite ship structures (DYCOSS); Tests and analyses efforts. In: 70th shock and vibration symposium , Albuquerque, NM, USA, 15–19 November 1999.
42. Davila CG and Camanho PP. Decohesion elements using two and three-parameter mixed-mode criteria. In: American helicopter society conference , Williamsburg, VA, USA, October 29 to November 1 2001.
43. Lemmen PPM · 2001
44. 10.1016/j.compositesb.2013.08.03010.1016/j.compositesb.2013.08.030 ↗