journal article·2013-10

A performance study on composites made from bamboo fabric and poly(lactic acid)

Nurul Fazita Mohammad Rawi, Krishnan Jayaraman, Debes Bhattacharyya

Publisher page

Abstract

The objective of this study is to investigate the performance of bamboo fabric–poly(lactic acid) composites manufactured by compression moulding. The effects of compression moulding parameters on the mechanical properties of the bamboo fabric–poly(lactic acid) composite sheets were evaluated. Optimum compression moulding parameters to achieve the “best” mechanical properties of the composites was determined using the Taguchi method of experimental design. A rheology test was also conducted to measure the viscosity of the poly(lactic acid) at different temperatures. The processing parameters were found to affect the consolidation and quality of the composites. It appeared that the impact strength of the bamboo fabric–poly(lactic acid) composites in warp direction was enhanced by 240% in comparison to pure poly(lactic acid), whereas the improvements of tensile and flexural properties were lower than expected. When compared with theoretical predictions, the measured values of warp and weft tensile modulus show good agreement than those predicted by rules of mixture. On the other hand, the experimental values of tensile strength were lower than theoretical values due to poor fibre matrix adhesion.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Natural Fiber Reinforced Composites · biodegradable polymer synthesis and properties · Bamboo properties and applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Centre for Advanced Composite Materials (CACM), Department of Mechanical Engineering, The University of Auckland, Auckland, New Zealand

References (39)

Show source-provided references
1. 10.1007/s10924-010-0185-010.1007/s10924-010-0185-0 ↗
2. 10.1007/s10924-011-0320-610.1007/s10924-011-0320-6 ↗
3. 10.1007/s12221-010-0060-610.1007/s12221-010-0060-6 ↗
4. 10.1007/s10853-007-1994-y10.1007/s10853-007-1994-y ↗
5. 10.1177/002199831140109610.1177/0021998311401096 ↗
6. 10.1016/j.compositesa.2005.04.01510.1016/j.compositesa.2005.04.015 ↗
7. 10.1007/s13233-011-0807-y10.1007/s13233-011-0807-y ↗
8. 10.1016/j.compositesa.2009.01.01210.1016/j.compositesa.2009.01.012 ↗
9. 10.1016/j.compositesb.2012.04.03910.1016/j.compositesb.2012.04.039 ↗
10. Nurul Fazita MR, Jayaraman K and Bhattacharyya D. Optimum processing conditions for the manufacture of bamboo fabric-polypropylene composites. In: 11th international conference flow processing in composite materials , Auckland, New Zealand, 9–12 July 2012, pp. 444–451.
11. 10.1007/s12221-008-0115-010.1007/s12221-008-0115-0 ↗
12. 10.1177/002199831038231610.1177/0021998310382316 ↗
13. 10.1016/j.cej.2011.07.07610.1016/j.cej.2011.07.076 ↗
14. 10.1016/j.compscitech.2008.01.00410.1016/j.compscitech.2008.01.004 ↗
15. 10.1021/ie048884910.1021/ie0488849 ↗
16. 10.1016/j.compositesa.2009.01.00210.1016/j.compositesa.2009.01.002 ↗
17. 10.1016/S0266-3538(03)00103-910.1016/S0266-3538(03)00103-9 ↗
18. 10.1016/S0266-3538(03)00100-310.1016/S0266-3538(03)00100-3 ↗
19. 10.1007/s10965-011-9646-y10.1007/s10965-011-9646-y ↗
20. 10.1016/j.compositesb.2011.10.02110.1016/j.compositesb.2011.10.021 ↗
21. 10.4028/www.scientific.net/KEM.334-335.48910.4028/www.scientific.net/KEM.334-335.489 ↗
22. Porras A, Maranon A and Quijano A. Development and characterization of a laminated composite material from polylactic acid (PLA) and woven bamboo fabric. In: 10th international conference on textile composites , Lille, France, 26–28 October 2010, pp. 546–554.
23. 10.1016/j.carbpol.2009.09.00110.1016/j.carbpol.2009.09.001 ↗
24. Yang CC. Development of high strength composites toecaps using LS-DYNA. Master Thesis, Department of Mechanical Engineering, The University of Auckland, New Zealand, 2010.
25. 10.1016/j.compositesa.2007.10.02110.1016/j.compositesa.2007.10.021 ↗
26. 10.1016/j.matdes.2006.08.00210.1016/j.matdes.2006.08.002 ↗
27. 10.1007/978-1-4757-2966-5_1010.1007/978-1-4757-2966-5_10 ↗
28. 10.1007/BF0035683510.1007/BF00356835 ↗
29. 10.1016/j.progpolymsci.2008.05.00410.1016/j.progpolymsci.2008.05.004 ↗
30. 10.1016/j.compscitech.2006.08.02410.1016/j.compscitech.2006.08.024 ↗
31. 10.1016/j.matdes.2007.07.00410.1016/j.matdes.2007.07.004 ↗
32. Kawabata S · 1989 · 67
33. 10.1533/tepr.2006.000410.1533/tepr.2006.0004 ↗
34. 10.1016/j.compscitech.2010.06.00510.1016/j.compscitech.2010.06.005 ↗
35. Brady DG · 1991 · 103
36. 10.1177/073168441243949410.1177/0731684412439494 ↗
37. 10.1016/j.mechmat.2007.10.00610.1016/j.mechmat.2007.10.006 ↗
38. 10.1016/j.compscitech.2007.06.02210.1016/j.compscitech.2007.06.022 ↗
39. 10.1016/j.compositesa.2009.04.00310.1016/j.compositesa.2009.04.003 ↗