journal article·2010-12

Impact behavior of short and continuous fiber-reinforced polyester composites

KJ Wong, Umar Nirmal, BK Lim

Publisher page

Abstract

In this study, the impact strengths of E-glass, coir, oil palm as well as E-glass/coir and E-glass/oil palm hybrid polyester composites were studied. All types of composites were reinforced with fiber volume fractions of 30%, 40%, and 50% and fiber lengths 3, 7, and 10 mm. Composite laminates reinforced with longitudinal and transverse coir fiber mats were also studied. The number of fiber mats varied from 1, 2, 3, and 4 layers for non-spaced fiber mats and 2, 3, and 4 layers for 1.5 mm spaced fiber mats. Besides, coir—polyester composite with addition of sand filler was studied as well, with 40%, 50%, and 60% of volume fractions and fiber lengths of 3, 7, and 10 mm. Results show that impact strength improves with fiber content and fiber length. In addition, longitudinal fiber mats always exhibit better impact toughness compared to transverse fiber mats. Impact strength is improved with the number of fiber layers but worsened by the fiber spacing. As for coir/polyester concrete, low fiber content and fiber length improve the impact strength. The fractured surfaces were inspected under scanning electron microscope to investigate the fracture mechanisms in each type of composites.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Natural Fiber Reinforced Composites · Mechanical Behavior of Composites · Structural Behavior of Reinforced Concrete

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Centre for Composites, Faculty of Mechanical Engineering, Universiti Teknologi Malaysia, Malaysia,

Faculty of Engineering and Technology, Multimedia University, Jalan Ayer Keroh Lama, Malaysia

References (61)

Show source-provided references
1. Kaufmann M. · 1967
2. Phillips LN · 1989
3. 10.1017/CBO978113917013010.1017/CBO9781139170130 ↗
4. 10.1016/j.mechmat.2007.10.00610.1016/j.mechmat.2007.10.006 ↗
5. 10.1016/S0921-3449(01)00089-110.1016/S0921-3449(01)00089-1 ↗
6. 10.1016/S0266-3538(03)00096-410.1016/S0266-3538(03)00096-4 ↗
7. 10.1016/j.compositesa.2003.09.01610.1016/j.compositesa.2003.09.016 ↗
8. 10.1016/S0266-3538(03)00099-X10.1016/S0266-3538(03)00099-X ↗
9. 10.1177/073168440708587610.1177/0731684407085876 ↗
10. 10.1016/j.compositesa.2004.02.00410.1016/j.compositesa.2004.02.004 ↗
11. 10.1016/S1359-835X(98)00157-210.1016/S1359-835X(98)00157-2 ↗
12. 10.1016/j.compscitech.2007.06.00510.1016/j.compscitech.2007.06.005 ↗
13. 10.1002/(SICI)1439-2054(20000301)276:1<1::AID-MAME1>3.0.CO;2-W10.1002/(SICI)1439-2054(20000301)276:1<1::AID-MAME1>3.0.CO;2-W ↗
14. 10.1023/A:102101392191610.1023/A:1021013921916 ↗
15. 10.1016/j.compscitech.2005.08.00910.1016/j.compscitech.2005.08.009 ↗
16. 10.1016/j.compscitech.2005.10.01510.1016/j.compscitech.2005.10.015 ↗
17. Fu SY · J Mater Process Technol · 1999 · 90 · 501
18. 10.1177/073168440404171110.1177/0731684404041711 ↗
19. 10.1007/BF0110654510.1007/BF01106545 ↗
20. 10.1007/s10853-005-1103-z10.1007/s10853-005-1103-z ↗
21. Nayak SK · J Reinf Plast Compos · 2009
22. 10.1177/00219983000340120110.1177/002199830003401201 ↗
23. 10.1177/073168440504489610.1177/0731684405044896 ↗
24. Cui YH · J Reinf Plast Compos · 2008
25. 10.1016/0266-3538(91)90072-W10.1016/0266-3538(91)90072-W ↗
26. 10.1016/j.conbuildmat.2005.02.00810.1016/j.conbuildmat.2005.02.008 ↗
27. 10.1016/S0266-3538(03)00084-810.1016/S0266-3538(03)00084-8 ↗
28. 10.1177/073168440708738010.1177/0731684407087380 ↗
29. ASTM-D256. · 1997
30. Agarwal BD · 2006
31. 10.1016/j.compscitech.2004.09.02010.1016/j.compscitech.2004.09.020 ↗
32. 10.1177/073168440707002710.1177/0731684407070027 ↗
33. 10.1177/002199830504726710.1177/0021998305047267 ↗
34. 10.1016/S0266-3538(01)00219-610.1016/S0266-3538(01)00219-6 ↗
35. 10.1016/0022-5096(65)90035-910.1016/0022-5096(65)90035-9 ↗
36. 10.1007/BF0111196410.1007/BF01111964 ↗
37. Chand N. · International encylopedia of composites · 1991 · 4 · 9
38. 10.1177/073168440606674710.1177/0731684406066747 ↗
39. 10.1023/A:101859393195110.1023/A:1018593931951 ↗
40. 10.1016/j.compscitech.2003.10.00210.1016/j.compscitech.2003.10.002 ↗
41. 10.1007/s10853-006-0074-z10.1007/s10853-006-0074-z ↗
42. 10.1023/A:102654642676410.1023/A:1026546426764 ↗
43. 10.1177/002199830504873710.1177/0021998305048737 ↗
44. 10.1007/BF0116074310.1007/BF01160743 ↗
45. Mallick PK · 1993
46. 10.1007/BF0055224810.1007/BF00552248 ↗
47. Goodier JN · J Appl Mech · 1933 · 1 · 3910.1115/1.4012173 ↗
48. 10.1243/03093247JSA55310.1243/03093247JSA553 ↗
49. 10.1007/BF0239687210.1007/BF02396872 ↗
50. 10.1007/s10853-006-0720-510.1007/s10853-006-0720-5 ↗
51. 10.1016/S0266-3538(01)00219-610.1016/S0266-3538(01)00219-6 ↗
52. 10.1002/app.1047510.1002/app.10475 ↗
53. Chawla KK · 1942
54. 10.1177/073168440302737710.1177/0731684403027377 ↗
55. 10.1177/073168440403527010.1177/0731684404035270 ↗
56. 10.1177/073168440708775510.1177/0731684407087755 ↗
57. 10.1002/app.1989.07037091610.1002/app.1989.070370916 ↗
58. Yamini S. · J Mater Sci · 1980 · 15 · 182310.1007/BF00550603 ↗
59. 10.1007/BF0055211210.1007/BF00552112 ↗
60. 10.1016/j.actamat.2004.11.01210.1016/j.actamat.2004.11.012 ↗
61. 10.1016/j.actamat.2004.11.01110.1016/j.actamat.2004.11.011 ↗