journal article·2015-08

Tribology of fiber reinforced polymer matrix composites—A review

Hiral H Parikh, Piyush P Gohil

Publisher page

Abstract

The use of fiber reinforced polymer matrix composites (FRPCs) is in boom in many structural, industrial, automotive, and engineering applications. Polymer matrix composites have been turned out the most hopeful material which can replace the conventional materials, metals, and woods. Owing to this the demand for analyzing the tribological behavior of FRPCs is amplified. In the current article an inclusive literature survey on the tribological behavior of FRPCs in terms of friction and wear properties of composite materials is explored. The paper reviews the effects of different operating parameters and material parameters on wear rate and frictional behavior of FRPCs. The analysis reveals that operating parameters like sliding velocity, sliding distance, load, temperature and material parameters like a fiber volume fraction, orientation of fibers, fiber length, filler content, and effect of surface treatment have a significant effect on the tribological behavior of composite material. The wear rate of FRPCs is controlled by adding the proper amount of filler content and fiber orientation.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Tribology and Wear Analysis · Natural Fiber Reinforced Composites · Polymer Nanocomposites and Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

School of Engineering and Technology, Navrachana University, Vadodara, Gujarat, India

Department of Mechanical Engineering, CHARUSAT, Changa, Gujarat India

Department of Mechanical Engineering, Faculty of Technology & Engineering, The M S University of Baroda, Kalabhavan, Vadodara, Gujarat, India

References (41)

Show source-provided references
1. Gohil Piyush P and Parikh Hiral H. Composites as TRIBO materials in engineering systems: significance and applications. In: Advances in chemical and materials engineering (ACME) book series: Processing techniques and tribological behavior of composite materials. USA: IGI Publisher 2015 pp.168–191.10.4018/978-1-4666-7530-8.ch007 ↗
2. Chandramohan D, Marimuthu K. Review on natural fibers. Int J Res Rev Appl Sci 2011; 8: 194–206.
3. Navin C, Fahim M. Tribology of natural fiber polymer composites, England: Woodhead Publishing Limited, 2009.
4. 10.1016/j.wear.2007.10.00610.1016/j.wear.2007.10.006 ↗
5. 10.4028/www.scientific.net/AMR.123-125.114710.4028/www.scientific.net/AMR.123-125.1147 ↗
6. 10.1016/S0043-1648(01)00696-210.1016/S0043-1648(01)00696-2 ↗
7. 10.1016/j.msea.2006.12.02710.1016/j.msea.2006.12.027 ↗
8. Charanjit S, Lakhvir S. Synthesis and tribological characterization of Al-SiC composite prepared by mechanical alloying. Int J Mech Eng Mater Sci 2012; 5: 31–36.
9. Basavarajappay S, Chandramohan G. Wear studies on metal matrix composites: a Taguchi approach. J Mater Sci Technol 2005; 21: 845–850.
10. Antaryami M. Dry sliding wear behaviour of epoxy-rubber dust composites. World Acad Sci Eng Technol 2012; 67: 579–584.
11. Nguong CW. A review on natural fibre reinforced polymer composites. World Acad Sci Eng Technol 2013; 73: 1123–1130.
12. Shivamurthy B, Siddaramaiah, Prabhuswamy MS. Influence of SiO2 fillers on sliding wear resistance and mechanical properties of compression moulded glass epoxy composites. J Minerals Mater Character Eng 2009; 8: 513–530.
13. Rajesh S, Rajakarunakaran S, Pandian S. Modelling and optimisation of sliding specific wear and coefficient of friction of Al based red mud metal matrix composite using Taguchi method and RSM. J Mater Phys Mech 2012; 15: 150–166.
14. Basavarajappa S, Arun KV, Paulo Davim J. Effect of filler material on dry sliding wear behaviour of polymer matrix composites—A Taguchi approach. J Miner Mater Character Eng 2009; 8: 379–391.
15. 10.1007/s10853-005-1171-010.1007/s10853-005-1171-0 ↗
16. Munium A, Algbory RM. Wear rate behaviour of carbon/epoxy composite materials at different working conditions. Iraqi J Mech Mater Eng 2011; 11: 475–485.
17. 10.1016/j.matdes.2012.06.04610.1016/j.matdes.2012.06.046 ↗
18. Mohan N, Natarajan S, Kumaresh Babu SP, . Investigation on two-body abrasive wear behavior of silicon carbide filled glass fabric-epoxy composites. J Miner Mater Character Eng 2010; 9: 231–246.
19. Navin C, Dwivedi UK. Sliding wear and friction characteristics of sisal fibre reinforced polyester composites: effect of sisal coupling agent and applied load. J Compos 2011; 46(2): 280–284.
20. 10.1016/0043-1648(94)06546-210.1016/0043-1648(94)06546-2 ↗
21. Punyapriya M, Acharya SK. Anisotropy abrasive wear behaviour of bagasse fiber reinforced polymer composite. Int J Eng Sci Technol 2010; 2: 104–112.
22. 10.1016/j.triboint.2011.10.01210.1016/j.triboint.2011.10.012 ↗
23. Dwivedi Umesh K, Ajay G, Chand N. Abrasive wear behaviour of bamboo powder filled polyester composites. J Bio Resources 2007; 2: 693–698.
24. 10.1016/j.wear.2009.06.00210.1016/j.wear.2009.06.002 ↗
25. Chittaranjan Deo, Acharya SK. Effect of fiber content on abrasive wear of Lantana camara fiber reinforced polymer matrix composite. Indian J Eng Mater Sci 2010; 17: 219–223.
26. Gangulari Kranthi Rajlakashmi N Biswas S et al. Wear performance evaluation of pine wood dust filled epoxy composites. In: Proceeding of the International conference on advancements in Polymeric Materials APM 20–22 February 2010 CIPET Bhubaneswar.
27. Aireddy H. Tribological behaviour and mechanical properties of bio-waste reinforced polymer matrix composites. J Metallurgy Mater Sci 2011; 53: 139–152.
28. 10.1016/j.wear.2004.01.00810.1016/j.wear.2004.01.008 ↗
29. Bhoopathi L, Sampath PS, Mylsamy K. Influence of fiber length in the wear behaviour of borassus fruit fiber reinforced epoxy composites. Int J Eng Sci Technol 2009; 4: 4119–4129.
30. Mahapatra SS, Vedansh C. Modelling and Analysis of abrasive wear performance of composites using Taguchi approach. Int J Eng Sci Technol 2009; 1: 123–135.
31. Yousif BF, El-Tayeb NSM. Wet adhesive wear characteristics of untreated oil palm fiber reinforced polyester and treated oil palm fiber reinforced polyester composites using the pin on disc and block on ring techniques. J Eng Tribol 2009; 224: 123–131.
32. Wong KJ, Yousif BF, Low KO. The effect of alkali treatment on the interfacial adhesion of bamboo fiber. J Mater Des Appl 2010; 224: 139–148.
33. Rao Chandra CK, Madhusudan S, Raghavendra G, . Investigation in to wear behaviour of coir fiber reinforced epoxy composites with Taguchi method. J Eng Res Appl 2012; 2: 371–374.
34. Majhi S, Samantarai SP, Acharya SK. Tribological behavior of modified rice husk filled epoxy composite. Int J Scientific Eng Res 2012; 3: 1–5.
35. Ishak MR, Leman Z, Sapuan SM, . The effect of sea water treatment on the impact and flexural strength of sugar palm fibre reinforced epoxy composites. Int J Mech Mater Eng IJMME 2009; 4: 316–320.
36. 10.2174/187446481090201006710.2174/1874464810902010067 ↗
37. 10.1016/j.triboint.2009.08.00610.1016/j.triboint.2009.08.006 ↗
38. 10.1080/10402004.2011.59754410.1080/10402004.2011.597544 ↗
39. Gohil Piyush P Parikh Hiral H and Patel Vimal B. Investigations of friction and wear in pultruded glass fibre epoxy composites. In: Proceedings of international conference on advances in tribology and engineering systems lecture notes in mechanical engineering. India: Springer 2014 ISSN 2195-4356 ISSN 2195-4364 (Electronic) ISBN 978-81-322-1655. DOI: 10.1007/978-81-322-1656-8_16.10.1007/978-81-322-1656-8_16 ↗
40. 10.1080/10402004.2011.59754410.1080/10402004.2011.597544 ↗
41. Nguong CW, Lee SNB, Sujan D. A Review on natural fibre reinforced polymer composites. World Acad Sci Eng Technol 2013; 73: 1123–1130.