journal article·2018-04

Mechanical characterisation and modelling of randomly oriented strand architecture and their hybrids – A general review

Swaroop B Visweswaraiah, Marina Selezneva, Larry Lessard, Pascal Hubert

Publisher page

Abstract

A comprehensive review of the mechanical characterisation and modelling of randomly oriented strand material architecture and their hybrids with laminates is presented. Randomly oriented strand composites are long discontinuous fibre systems that exhibit excellent formability characteristics and stiffness properties comparable to quasi-isotropic laminates, allowing their use in the manufacture of intricate geometric parts for automotive and aerospace industries. Randomly oriented strand architecture complements out-of-autoclave methods such as compression moulding, thermostamping and resin-transfer moulding leading to cost-reduction. Their applicability is limited to non-structural and low-load bearing applications due to their low strength properties. Continuous fibre aerospace preforms exhibiting excellent mechanical performance possess low formability characteristics and are confined to simple shell-like geometries with minimal curvatures, while incurring high-costs and long manufacturing times. Hybridisation of randomly oriented strand and with other material architectures represents trade-off solutions of formability and performance characteristics often yielding synergistic effects. Seemingly simple, randomly oriented strand architecture is a complex material system that poses several structural and process challenges. This work categorises the pertinent research work from the literature on the mechanical characterisation into the framework of a formal characterisation environment of composite structures that includes the coupon, the part and structural levels. The manufacturing, dispersion methods and measurement techniques are qualitatively assessed with reference to the mechanical properties. The discussion on modelling involves the identification of crucial characteristics of significant analytical and numerical modelling techniques devised for the prediction of the mechanical behaviour of randomly oriented strand composites and their hybrids. Emphasis is on the methods of stiffness and strength prediction. Our perspectives on the effective use of randomly oriented strand composites and their hybrids are discussed. Process characterisation and process modelling of randomly oriented strand composites and their hybrids are beyond the scope of this article.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Mechanical Behavior of Composites · Composite Material Mechanics · Cellular and Composite Structures

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Structures and Composite Materials Laboratory, Department of Mechanical Engineering, McGill University, Canada

Composite Materials Group, Department of Materials Engineering, KU Leuven, Belgium

References (100+)

Show source-provided references
1. 10.1016/B0-08-042993-9/00173-X10.1016/B0-08-042993-9/00173-X ↗
2. 10.1016/B0-08-042993-9/00168-610.1016/B0-08-042993-9/00168-6 ↗
3. 10.1016/j.compositesa.2014.12.00910.1016/j.compositesa.2014.12.009 ↗
4. 10.1016/S0266-3538(98)00077-310.1016/S0266-3538(98)00077-3 ↗
5. 10.1016/0022-5096(65)90035-910.1016/0022-5096(65)90035-9 ↗
6. 10.1177/08927057910040030210.1177/089270579100400302 ↗
7. 10.1007/BF0056721110.1007/BF00567211 ↗
8. 10.1016/j.compscitech.2006.01.01910.1016/j.compscitech.2006.01.019 ↗
9. Fu S-Y, Lauke B, and Mai Y-W. Science and engineering of short fibre reinforced polymer composites. 1st ed. Florida: Woodhead Publishing, 2009.10.1533/9781845696498.1 ↗
10. 10.12783/issn.2168-4286/2/3/4/Such10.12783/issn.2168-4286/2/3/4/Such ↗
11. 10.1177/073168440808888310.1177/0731684408088883 ↗
12. 10.1177/002199831561312910.1177/0021998315613129 ↗
13. Visweswaraiah SB · J Compos Mater · 2016
14. 10.1016/S0266-3538(00)00066-X10.1016/S0266-3538(00)00066-X ↗
15. 10.1016/j.compscitech.2005.06.00110.1016/j.compscitech.2005.06.001 ↗
16. 10.1016/S0266-3538(97)00135-810.1016/S0266-3538(97)00135-8 ↗
17. 10.1016/S1359-835X(01)00017-310.1016/S1359-835X(01)00017-3 ↗
18. 10.1016/S1359-835X(00)00180-910.1016/S1359-835X(00)00180-9 ↗
19. 10.1016/S1359-835X(01)00140-310.1016/S1359-835X(01)00140-3 ↗
20. 10.1016/j.compositesb.2005.04.00210.1016/j.compositesb.2005.04.002 ↗
21. 10.1016/j.compstruct.2006.02.03610.1016/j.compstruct.2006.02.036 ↗
22. 10.1016/j.compositesa.2014.08.02710.1016/j.compositesa.2014.08.027 ↗
23. 10.1007/BF0055319410.1007/BF00553194 ↗
24. 10.1016/j.compstruct.2017.06.00210.1016/j.compstruct.2017.06.002 ↗
25. Visweswaraiah SB · J Reinf Plastics Compos · 2017 · 0
26. Visweswaraiah S, et al. Conditions for notch sensitivity in hybrid fibre architectures of randomly oriented strands combined with laminate groups. In: COMPTEST 2017 . 20–25 August 2017. S.L. Lomov, L. Gorbatikh, Y. Swolfs, Belgium.
27. Visweswaraiah S, et al. Effects of hybridization of laminates with randomly oriented strands at coupon and part levels. In CANCOM 2017. 17–20 July 2017, Ottawa.
28. 10.1016/j.compositesa.2016.12.01810.1016/j.compositesa.2016.12.018 ↗
29. Han JH, et al. Effect of fabric reinforcement on failure response of discontinuous long fiber composite bolted joints. In: SAMPE, Long Beach, CA, 23–26 May 2011.
30. Evans AD, et al. Joint design of continuous/discontinuous hybrid carbon fibre composites. In: 21st International conference on composite materials. 20–25 August, 2017, Xi'an, China.
31. Green Tweed. XYCOMP® DLF high-performance thermoplastic composite aerospace brackets. 2009. www.greentweede.com
32. Thomas GP. Compression molded composites: processes, benefits and applications – an interview with TenCate, in AZoM.
33. Roy S, et al. Compression molding of composite tailboom frames. In: AHS 70th Annual forum. Montreal: American Helicopter Society International, Inc, 20–25 May, 2014. Montreal, Canada.
34. USA, D.o.D.–. Composite materials handbook: polymer matric composites guidelines for characterization of structural materials. 2002.
35. 10.1177/073168441665113410.1177/0731684416651134 ↗
36. Eguémann N. Study on the mechanical behaviour of carbon fibre reinforced PEEK polymer with a layered discontinuous architecture. 2013, L’U.F.R. des sciences et techniques de l'Université de Franche-Comté.
37. Fortin GY. Process-induced shape distortions in aerospace thermoplastic composites. In: Materials engineering . Vancouver, Canada: University of British Columbia, 2016.
38. Harper LT · Automated spray deposition for net-shape carbon/epoxy compression moulding in ICCM-17 · 2009
39. 10.1016/j.compositesa.2010.12.00110.1016/j.compositesa.2010.12.001 ↗
40. Johanson K, et al. Studying the heterogeneity of discontinuous fiber composites using a new full-field strain measurement system. In: The 19th international conference on composite materials , Montreal, Canada, July 28-August 2, 2013.
41. HexMC® user guide. Hexcel Corporation, 2013.
42. 10.1016/j.compscitech.2016.10.02410.1016/j.compscitech.2016.10.024 ↗
43. 10.1016/j.compstruct.2017.05.00210.1016/j.compstruct.2017.05.002 ↗
44. 10.1016/j.compositesa.2014.12.00910.1016/j.compositesa.2014.12.009 ↗
45. 10.1177/002199830934302810.1177/0021998309343028 ↗
46. 10.1016/j.compositesa.2014.10.01410.1016/j.compositesa.2014.10.014 ↗
47. Kilic MH. A nonlinear 3D micromechanical and structural framework for analysis of discontinuous long-fiber thermoplastic composites. In: CAMX – the composites and advanced materials expo, Orlando, FL. 13–16 October 2014.
48. Landry B. Experimental study and numerical simulation of defect formation during compression moulding of discontinuous long fibre carbon/PEEK composites. In: Mechanical Engineering . Montreal: McGill University, Thesis, 2016.
49. Collins C, and Hubert P. Dimensional stability in compression moulded discontinuous long fibre carbon/PEEK composites. In: CANCOM. Ottawa, 17–20 July 2017.
50. 10.1016/j.compscitech.2012.08.01810.1016/j.compscitech.2012.08.018 ↗
51. Tuttle M, Shifman T, and Boursier B. Simplifying certification of discontinuous composite material forms for primary aircraft structures. In: SAMPE , Seattle, Washington DC, 17–20 May 2010.
52. 10.1364/AO.55.000D4610.1364/AO.55.000D46 ↗
53. 10.1016/j.compscitech.2013.02.00810.1016/j.compscitech.2013.02.008 ↗
54. 10.1016/j.compositesa.2016.10.01310.1016/j.compositesa.2016.10.013 ↗
55. 10.1016/j.compositesa.2010.03.00210.1016/j.compositesa.2010.03.002 ↗
56. Denos BR. CT Scan Analysis for the Characterization of Fiber Orientation in Long Discontinuous Fiber Composite Materials – Thesis, in Department of Aeronautics and Astronautics , Purdue University: West Lafayette, Indiana, 2014.
57. Cutting RA. Considerations for non-destructive evaluation of discontinuous fiber composites using dynamic analysis – Thesis, in Aeronautics and Astronautics . Purdue University: West Lafayette, Indiana, 2015.
58. Lyu X · J Compos Mater · 2017 · 0 · 1
59. Eguémann N, et al. Processing of characterisation of carbon fibre reinforced PEEK with discontinuous architecture. In: ECCM16 – 16th European conference on composite materials , Seville, Spain. 22–26 June 2014.
60. 10.1016/j.compositesa.2016.05.00510.1016/j.compositesa.2016.05.005 ↗
61. 10.1016/0167-6636(87)90005-610.1016/0167-6636(87)90005-6 ↗
62. Han JH, Alexander WB, and Godwin A. Characterization of milled carbon fiber added random discontinuous long fiber composites. In: SAMPE, Seattle, WA, 17–20 May 2010.
63. 10.1016/j.compositesa.2015.05.02010.1016/j.compositesa.2015.05.020 ↗
64. 10.1016/j.compstruct.2017.07.00610.1016/j.compstruct.2017.07.006 ↗
65. Boursier B, and Lopez A. Failure initiation and effect of defects in structural discontinuous fibre composites. In: SAMPE Fall technical conference, 11–14 October, Salt Lake City, 2010.
66. 10.1016/j.compositesa.2008.12.01210.1016/j.compositesa.2008.12.012 ↗
67. Guo Q, et al. Numerical and experimental study of the mode i interlaminar failure of chopped carbon fiber tape reinforced thermoplastics. In: 21st International conference on composite materials, 20–25 August 2016. ICCM: Xi’an, China.
68. Lyu X, Takahashi J, and Y. Wan Analysis of viscoelastic behaviour of ultra-thin chopped carbon fiber tape reinforced thermoplastics with different tape lengths. In: ECCM17 – 17th European conference on composite materials, 26–28 June 2016. ECCM: Munich, Germany.
69. 10.1002/app.2422410.1002/app.24224 ↗
70. Meng L, et al. Failure analysis of ultra-thin chopped carbon fiber tape reinforced thermoplastic in mechanical joints. In: ECCM17 – 17th European conference on composite materials , 26–28 June 2017. ECCM: Munich.
71. 10.1016/j.compositesa.2017.06.00210.1016/j.compositesa.2017.06.002 ↗
72. 10.1016/j.compositesa.2016.08.02710.1016/j.compositesa.2016.08.027 ↗
73. TenCate Advanced Composites. Datasheet: TenCate Cetex(R) MC1200 PEEK Thermoplastic BMC. 2012.
74. 10.1016/j.repl.2014.12.07010.1016/j.repl.2014.12.070 ↗
75. Rasheed MIA. Compression molding of chopped woven thermoplastic composite flakes – a study on processing and performance . PhD thesis, University of Twente, Netherlands, 2016.
76. Eguémann N, et al. Compression moulding of complex parts for the aerospace with discontinuous novel and recycled thermoplastic composite materials. In: The 19th International conference on composite materials , Montreal, Canada, July 28–Aug 2, 2013.
77. Feraboli P, et al. Lamborghini “forged composites(R)” technology for the suspension arms of the Sesto Elemento. In: The 26th American Society for Composites (ASC) technical conference , Montreal, Canada, 26–28 September 2011.
78. Howell DD, andFukumote S. Compression molding of long chopped fiber thermoplastic composites. In: The compoistes and advanced materials expo (CAMX) , Orlando, FL, 2014.
79. Kilic MH. Multi-scale modeling of discontinuous long-fibre composites. In: SAMPE conference proceedings, Seattle, WA, 2–5 June 2014.
80. 10.4050/JAHS.60.01100510.4050/JAHS.60.011005 ↗
81. LeBlanc D. Compression moulding of complex parts with randomly-oriented strand thermoplastic composites . Montreal: McGill University, 2014.
82. Leblanc D, et al. Compression moulding of stiffened brackets using randomly-oriented strands thermoplastic composites. In: CAMX 2014 – Composites and advanced materials expo: combined strength . Unsurpassed Innovation, 2014.
83. Roux M, et al. Recycling of high performance thermoplastic composites with high voltage fragmentation. In: The 19th international conference on composite materials . Montreal, Canada, 2013.
84. Eguemann N, et al. Manufacturing and recycling of complex composite thermoplastic parts for aerospace applications. In: SAMPE Europe 7th SETEC 12 . Lucerne, Switzerland, 2012.
85. Fujita M, Nakashima Y, and Takahashi J. Influence of strand dispersion method on mechanical properties of hollow-S-shaped member made of randomly-oriented CFRTP strands. In: 21st International conference on composite materials . 20–25 August 2017: Xi'an, China.
86. Toyoda H, et al. Influence of strand dimension and dispersion method on rigidity and its scatter of hat shaped specimens made of randomly-oriented CFRTP strands. In: 21st International conference on composite materials . 20–25 August 2017: Xi'an, China.
87. Kravchenko SG. Failure Analysis in Platelet Molded Composite Systems – Thesis, in Department of Aeronautics and Astronautics . Purdue University: West Lafayette, Indiana, 2017.
88. 10.1002/pc.1034510.1002/pc.10345 ↗
89. 10.1016/S0266-3538(98)00155-910.1016/S0266-3538(98)00155-9 ↗
90. 10.1016/S1359-835X(02)00086-610.1016/S1359-835X(02)00086-6 ↗
91. 10.1016/j.jmatprotec.2007.12.04710.1016/j.jmatprotec.2007.12.047 ↗
92. 10.1016/j.matdes.2010.07.03110.1016/j.matdes.2010.07.031 ↗
93. 10.1016/j.compositesb.2012.01.03110.1016/j.compositesb.2012.01.031 ↗
94. 10.1016/j.compositesb.2011.06.00110.1016/j.compositesb.2011.06.001 ↗
95. 10.1002/pc.2025710.1002/pc.20257 ↗
96. 10.1016/j.proeng.2014.10.19710.1016/j.proeng.2014.10.197 ↗
97. 10.1002/pc.75007010410.1002/pc.750070104 ↗
98. Duane E, and Daniel Grauer BH. Manfred Reif & Frank Henning, Andreas Martsman, Simon Tage Jespersen, Using unidirectional glass tapes to improve impact performance of thermoplastic composites in automotive applications. 11–12 September 2012. 12th annual SPE automotive composites conference and exhibition, Troy, MI.
99. Thattaiparthasarthy KB · Continuous fibers tailored long fiber reinforced thermoplastics in ICCM-17 · 2009
100. 10.1016/j.matdes.2009.09.04310.1016/j.matdes.2009.09.043 ↗