journal article·2006-11

Cutting Parameters Optimization for Surface Roughness in Machining of GFRP Composites using Taguchi’s Method

K. Palanikumar

Publisher page

Abstract

This article discusses the use of Taguchi’s method and Pareto ANOVA analysis for optimizing the cutting parameters in turning glass fiber reinforced plastic (GFRP) composites using a poly crystalline diamond (PCD) tool for minimizing surface roughness. The cutting parameters evaluated are cutting speed, feed rate, and depth of cut. An L 27 orthogonal array, signal to noise ratio, and Pareto ANOVA analysis are used to analyze the effect of cutting parameters and its interactions. The experimental results suggest that the most significant process parameter is feed rate followed by cutting speed. The study shows that the Taguchi method and Pareto ANOVA are suitable for optimizing the cutting parameters with the minimum number of trials.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Advanced machining processes and optimization · Advanced Machining and Optimization Techniques · Advanced Surface Polishing Techniques

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Department of Mechanical & Production Engineering Sathyabama Institute of Science & Technology, Deemed University Chennai 600 119, India, ,

References (24)

Show source-provided references
1. 2002
2. 10.1016/S0007-8506(07)60186-310.1016/S0007-8506(07)60186-3 ↗
3. 10.1177/00219983710050010910.1177/002199837100500109 ↗
4. 10.1016/S0007-8506(07)61593-510.1016/S0007-8506(07)61593-5 ↗
5. 10.1016/0378-3804(88)90021-610.1016/0378-3804(88)90021-6 ↗
6. 10.1016/S0890-6955(99)00017-610.1016/S0890-6955(99)00017-6 ↗
7. Phadke, M. S. · 1989
8. 10.1016/S0924-0136(03)00865-310.1016/S0924-0136(03)00865-3 ↗
9. Park, S. H. · 1996
10. 10.1016/S0924-0136(99)00221-610.1016/S0924-0136(99)00221-6 ↗
11. 10.1504/IJMTM.2004.00451410.1504/IJMTM.2004.004514 ↗
12. 10.1016/j.ijmachtools.2004.08.00710.1016/j.ijmachtools.2004.08.007 ↗
13. Balavendram, N. · 1985
14. Singh, H. · Journal of Productivity · 2003 · 44 · 43
15. Santhanakrishnan, G. (1990). Investigations on Machining of FRP Composites and their Tribological Behaviour, PhD Thesis, IIT Madras, Chennai, India.
16. Palanikumar, K. · J. Materials & Design · 2005
17. Ross, P. J. · 1989
18. Chen, Y. H. · International Journal of Materials & Product Technology · 1996 · 11 · 333
19. Yang, W. H. · Journal of Materials Processing Technology · 1998 · 84 · 123
20. 10.1016/0890-6955(95)00014-O10.1016/0890-6955(95)00014-O ↗
21. 10.1007/s00170005005710.1007/s001700050057 ↗
22. 10.1177/073168440506056810.1177/0731684405060568 ↗
23. Komanduri, R. · Mechanical Engineering · 1993 · 58
24. 10.1016/S0924-0136(99)00040-010.1016/S0924-0136(99)00040-0 ↗