Poly(Lactic Acid) (PLA)-reinforced Kenaf Bast Fiber Composites: The Effect of Triacetin
Source abstract
Abstract
In this article, the mechanical, morphological, and dynamic-mechanical properties of the blends of PLA and kenaf bast short fiber were investigated. The composites, with different fiber loading and triacetin content, were prepared by melt blending techniques using a Brabender internal mixer at 60 rpm and 170°C for 10 min and their properties were examined. Pure PLA was used as a reference for the biocomposite samples. Triacetin was used as a plasticizer for PLA and PLA/kenaf composites in order to study the improvement in tensile properties. The tensile strength and stiffness of unplasticized biocomposite materials decreased with the addition of kenaf bast fibers but improved with the addition of triacetin. The optimum fiber loading was 30 wt% kenaf fibers in the PLA matrix with the addition of 5% triacetin. The dynamic mechanical analyses showed that triacetin improved the thermal stability of the biocomposites. The triacetin increased the storage modulus and gave a lower softening temperature for plasticized biocomposites. The micrographs of the tensile specimens and their fractured surfaces, which were examined by scanning electron microscopy, demonstrated that better adhesion between the fibers and the matrix was achieved with the addition of the plasticizer.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Natural Fiber Reinforced Composites · biodegradable polymer synthesis and properties · Nanocomposite Films for Food Packaging
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Department of Chemistry, Faculty of Science, Universiti Putra Malaysia, 43400 UPM Serdang, Malaysia, , Laboratory of Bio-Composite Technology, Institute of Tropical Forestry and Forest Products Universiti Putra Malaysia, 43400 UPM Serdang, Malaysia
Department of Chemistry, Faculty of Science, Universiti Putra Malaysia, 43400 UPM Serdang, Malaysia
Laboratory of Bio-Composite Technology, Institute of Tropical Forestry and Forest Products Universiti Putra Malaysia, 43400 UPM Serdang, Malaysia
References (24)
Show source-provided references
1. 10.1016/S0266-3538(03)00096-410.1016/S0266-3538(03)00096-4 ↗
2. Mohanty, A.K. · Journal of Polymers and the Environment · 2004 · 10 · 19
3. 10.1016/S0266-3538(03)00099-X10.1016/S0266-3538(03)00099-X ↗
4. 10.1016/S0266-3538(03)00103-910.1016/S0266-3538(03)00103-9 ↗
5. Shinji, O. · Journal of Mechanics of Materials · 2007 · 40 · 446
6. 10.1016/S0266-3538(03)00100-310.1016/S0266-3538(03)00100-3 ↗
7. 10.1002/mame.20029003110.1002/mame.200290031 ↗
8. 10.3144/expresspolymlett.2009.2910.3144/expresspolymlett.2009.29 ↗
9. Müssig, J. · Composites Part A · 2005 · 37 · 1591
10. 10.1002/(SICI)1097-4628(19981128)70:9<1847::AID-APP24>3.0.CO;2-P10.1002/(SICI)1097-4628(19981128)70:9<1847::AID-APP24>3.0.CO;2-P ↗
11. Ganster, J. · Progress in Polymer Science · 2006 · 24 · 221
12. Lu, J.Z. · Wood and Fiber Science · 2000 · 32 · 88
13. 10.1016/j.compstruct.2005.06.00510.1016/j.compstruct.2005.06.005 ↗
14. Espert, M. · Journal of Polymers and the Environment · 2003 · 10 · 19
15. Ashori, A. · Journal of Bioresources Technology · 2007 · 9 · 43
16. Drzal, L.T. · Macromolecular Materials and Engineering · 2002 · 1 · 276
17. 10.1177/002199830708621210.1177/0021998307086212 ↗
18. Piorkowska, P. · Composites Engineering Part B · 2006 · 28 · 331
19. Sharifah, H. · Journal of Composites Science and Technology · 2003 · 64 · 1219
20. 10.1016/j.polymdegradstab.2005.02.02010.1016/j.polymdegradstab.2005.02.020 ↗
21. Huda, M.S. · Composites Science and Technology · 2007 · 6 · 1813
22. 10.1016/j.pmatsci.2005.05.00210.1016/j.pmatsci.2005.05.002 ↗
23. 10.1016/S0926-6690(99)00009-610.1016/S0926-6690(99)00009-6 ↗
24. Ogata, N. · Journal of Applied Polymer Science · 1997 · 12 · 584