journal article·1994-03

Design and Performance of Connections for Pultruded Frame Structures

Lawrence C. Bank, Ayman S. Mosallam, Greg T. McCoy

Publisher page

Abstract

The design and performance of connections for framed structures built from commercially produced pultruded wide-flange shapes is discussed. These connec tions, known in the civil engineering community as beam-to-column connections, can be found in most building frames. The response of a framed structure is influenced by both the rotational stiffness and the ultimate strength of its connections. This article describes an experimental and analytical investigation of the behavior of pultruded beam-to-column connections. Four full-size connections were designed and tested. Connection elements consisted of pultruded angle and Tee Flange shapes and gusset plates which were "bolted" with pultruded threaded rods and compression molded nuts or "bonded" with an epoxy adhesive. Conventional clip angle type connections and a novel prototype connection that utilized both Tee Flange shapes and tubular stiffeners were tested. Moment-rotation and ultimate strength data are reported as well as detailed descriptions of the failure modes of each of the connections. Comparisons are made between the different connections. Results of an analysis of a full-size pultruded frame are presented to demonstrate the significance of the connection rotational stiffnesses on the frame's response. The performance of the prototype connection was found to be far superior to the conventional clip angle connec tion. Recommendations are made for the design of connections for pultruded frame struc tures.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Structural Load-Bearing Analysis · Structural Behavior of Reinforced Concrete · Mechanical Behavior of Composites

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Department of Civil Engineering The Catholic University of America Washington, DC 20064

Creative Pultrusions, Inc. Alum Bank, PA 15521

References (20)

Show source-provided references
1. Ballinger, C. · Civil Engineering, ASCE · 1990 · 60 · 63
2. Bank, L.C. 1989 "Properties of Pultruded Fiber Reinforced Plastic (FRP) Structural Members," in Bridge Design and Performance and Composite Materials, Transportation Research Record 1223. Washington, DC, Transportation Research Board, pp 117-124
3. Bank, L.C. and A.S. Mosallam. 1990. "Creep and Failure of a Full-Size Fiber Reinforced Plastic Pultruded Frame," in Composite Material Technology 1990, T Kozik and D. Hui, eds. ASME PD, Vol 32, NY, NY: ASME, pp 49-56.
4. Bank, L.C. and A.S. Mosallam 1991a "Performance of Pultruded FRP Beam-to-Column Connections," m Structures Congress '91, T. Williamson, ed. 9th ASCE Structures Congress, ASCE, Indianapolis, IN, April 29-May 1, pp 389-392.
5. Bank, L.C.
6. Bank, L.C., A.S. Mosallam and H.E. Gonsior. 1990 "Beam-to-Column Connections for Pultruded FRP Structures," Serviceability and Durability of Construction Materials, Proceedings of the First Materials Engineering Congress, Denver, CO, August 13-15, B Suprenant, ed. NY.ASCE, pp 804-813.
7. Chen, W. F. · 1987
8. Civil Engineering · 1988 · 82
9. 10.1139/l75-02610.1139/l75-026 ↗
10. Gerstle, K.H. 1985 "Flexibly Connected Steel Frames," Chapter 7 m Steel Framed Structures Stability and Strength, R. Narayagan, ed. Essex, U K . Elsevier Applied Science, pp 205-239
11. Hatfield, H.A. · ENR · 1987 · 29
12. Hollaway, L.
13. 10.1016/0034-3617(90)90250-I10.1016/0034-3617(90)90250-I ↗
14. 1989
15. Mosallam, A.S. · 1990
16. Mosallam, A.S.
17. Mottram, J.T. · The Structural Engineer · 1991 · 69 · 211
18. Oplinger, D.W.
19. 10.1016/0263-8223(87)90068-710.1016/0263-8223(87)90068-7 ↗
20. Smallowitz, H. · Civil Engineering · 1985 · 38