Effect of ply-thickness on impact damage morphology in CFRP laminates
Source abstract
Abstract
In this article, the effects of ply thickness on the impact damage mechanisms in CFRP laminates are discussed based on the experimental observations. Quasi-isotropic CFRP laminates were manufactured using 38 µm thick thin-ply prepregs. Impact damage inside the laminates was evaluated by using ultrasonic scanning and sectional fractography. Compression after impact strength was also evaluated. Thin-ply laminates showed 23% higher strength than standard-ply laminates. Transverse cracks decreased drastically in thin-ply laminates, and localized delamination was largely extended. Based on the discussions in our previous study and the literature, the specific ply thickness without drastic crack propagation appears to be less than or equal to 40 µm. Therefore, the thin laminates showed few and localized transverse cracks and delamination was largely propagated in the midplane.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Mechanical Behavior of Composites · Smart Materials for Construction · Structural Behavior of Reinforced Concrete
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Research Laboratory for Integrated Technological Systems, Kanazawa Institute of Technology, Hakusan-City, Ishikawa, Japan.
Graduate Student of Kanazawa Institute of Technology, Nonoichi-Town, Ishikawa, Japan.
Industrial Technology Center of Fukui Prefecture, Japan.
Sakai Ovex Co., Ltd., Japan.
Department of Mechanical Engineering, College of Engineering, Kanazawa Institute of Technology, Nonoichi-Town, Ishikawa, Japan.
References (36)
Show source-provided references
1. Guynn EG and Obrien TK. The influence of lay-up and thickness on composite impact damage and compression strength. In: Structures, Structural Dynamics, and Materials Conference , 26th, Orlando, FL, 1985, pp. 187–196.10.2514/6.1985-646 ↗
2. 10.1016/0263-8223(89)90048-210.1016/0263-8223(89)90048-2 ↗
3. 10.1016/0010-4361(89)90335-210.1016/0010-4361(89)90335-2 ↗
4. 10.1115/1.311950010.1115/1.3119500 ↗
5. 10.1177/00219983920260140810.1177/002199839202601408 ↗
6. 10.1520/CTR10361J10.1520/CTR10361J ↗
7. 10.1016/0266-3538(95)00079-810.1016/0266-3538(95)00079-8 ↗
8. 10.1016/0734-743X(94)00039-Y10.1016/0734-743X(94)00039-Y ↗
9. 10.1016/0010-4361(95)91384-H10.1016/0010-4361(95)91384-H ↗
10. 10.1007/BF0035309110.1007/BF00353091 ↗
11. 10.1016/S1359-8368(99)00076-110.1016/S1359-8368(99)00076-1 ↗
12. 10.1016/S0266-3538(99)00126-810.1016/S0266-3538(99)00126-8 ↗
13. 10.1016/S0266-3538(01)00111-710.1016/S0266-3538(01)00111-7 ↗
14. 10.1016/j.compositesa.2004.07.00810.1016/j.compositesa.2004.07.008 ↗
15. 10.1016/j.ijsolstr.2009.03.01010.1016/j.ijsolstr.2009.03.010 ↗
16. 10.1177/07316844830020040210.1177/073168448300200402 ↗
17. 10.1016/0266-3538(95)00097-610.1016/0266-3538(95)00097-6 ↗
18. 10.4028/www.scientific.net/KEM.141-143.1910.4028/www.scientific.net/KEM.141-143.19 ↗
19. 10.1016/S1359-835X(01)00072-010.1016/S1359-835X(01)00072-0 ↗
20. 10.1016/S1359-835X(01)00141-510.1016/S1359-835X(01)00141-5 ↗
21. 10.1016/j.compscitech.2005.04.00910.1016/j.compscitech.2005.04.009 ↗
22. 10.1007/BF0054166610.1007/BF00541666 ↗
23. 10.1177/00219983800140010710.1177/002199838001400107 ↗
24. 10.1177/00219983840180010610.1177/002199838401800106 ↗
25. Kawabe K, Tomoda S and Matsuo T. A pneumatic process for spreading reinforcing fiber tow. In: The 42nd International SAMPE Symposium & Exhibition , Anaheim, CA, May 4–8, 1997, pp. 65–76.
26. Sasayama H · 2003 · 18
27. Tsai SW, Sihn S and Kim RY. Thin ply composites. In: Collection of Technical Papers - AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference , Vol. 4, AIAA/ASME/ASCE/AHS/ASC, Austin, TX, 2005, pp. 2555–2559.10.2514/6.2005-2005 ↗
28. 10.1016/j.compscitech.2006.06.00810.1016/j.compscitech.2006.06.008 ↗
29. Kawabe K · SAMPE J · 2009 · 45 · 6
30. 10.1016/j.ijfatigue.2006.02.01010.1016/j.ijfatigue.2006.02.010 ↗
31. 10.1016/j.compstruct.2007.01.01510.1016/j.compstruct.2007.01.015 ↗
32. Morita M, Saito H, Tanaka M and Kimpara I. Clarification of impact damage morphology in Thin-Ply CFRP laminate. In: Proceedings of 11th Japan International SAMPE Symposium , November 25–27, Tokyo, Japan, AM-1 – 2, 2009.
33. 10.4028/www.scientific.net/KEM.141-143.3510.4028/www.scientific.net/KEM.141-143.35 ↗
34. 10.1016/S0734-743X(99)00003-210.1016/S0734-743X(99)00003-2 ↗
35. Takeuchi H, Saito H and Kimpara I. Restraining effects of transverse cracking in 90° layer of Thin-ply CFRP cross-ply laminates. In: Proceedings of 7th Asian-Australasian Conference on Composite Material (ACCM-7) , Taipei, Taiwan, WED-SE25-06 (CD-ROM), 2010.
36. 10.1177/002199830203601797810.1177/0021998302036017978 ↗