journal article·2004-05

Effects of Moisture Conditioning Methods on Mechanical Properties of Injection Molded Nylon 6

Nanying Jia, Howard A. Fraenkel, Val A. Kagan

Publisher page

Abstract

The influence of various standard (ASTM, ISO) and experimental moisture conditioning methods on mechanical performance of injection molded nylon 6 is discussed as a result of an in-depth, comprehensive investigation. These methods covered a wide range for two basic process parameters for conditioning: temperature (from 23 to 100 C) and relative humidity (from 50% RH to water immersion). The variation of these parameters may result in significantly different moisture absorption rates, equilibrium levels and mechanical properties. The kinetics of mechanical performance and microstructure were evaluated prior to tests and during conditioning in this comprehensive analysis. The results from this investigation may provide comprehensive, up-to-date information and recommendations concerning accelerated nylon conditioning methods for test specimens and various molded parts, preselection of nylon based plastic for design, and prediction and optimization of mechanical performance.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Polymer crystallization and properties · Natural Fiber Reinforced Composites · Additive Manufacturing and 3D Printing Technologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Honeywell International Morristown, NJ 07962-1021, USA

122 Edgefield Drive, Morris Plains NJ 07950-1960, USA

References (7)

Show source-provided references
1. 1. Jia, N. and Kagan, V. (2001). Mechanical Performance of Polyamides with Influence of Moisture and Temperature – Accurate Evaluation and Better Understanding, Plastics Failure: Analysis and Prevention, pp. 95–104, Plastic Design Library (PDL), New York .10.1016/B978-188420792-1.50014-7 ↗
2. 2. Kohan, M. (1997). Nylon Plastic Handbook, 598-598 pp., Hanser/Gardner Publications Inc., New York .
3. 3. (1998). Polyamide, Plastics Handbook, Vol. 4, p. 905-905, Hanser Publishing, Munich .
4. 4. (1988). Engineering Plastics, Engineered Materials Handbook, Vol. 2, 882-882 pp., ASM International, Metals Park OH .
5. 5. Nakai, A., Ikegaki, S., Hamada, H. and Takeda, N. (2000). Degradation of Braided Composites in Hot Water, Composites Science and Technology, Vol. 60, pp. 325–331, Elsevier Science Ltd., New York .10.1016/S0266-3538(99)00131-1 ↗
6. 6. Lundgren, J. and Gudmundson, P. (1999). Moisture Absorption in Glass-Fibre/Epoxy Laminates with Transverse Matrix Cracks, Composites Science and Technology, Vol. 59, pp. 1983–1991, Elsevier Science Ltd., New York .10.1016/S0266-3538(99)00055-X ↗
7. 7. Lundgren, J. and Gudmundson, P. (1998). A Model for Moisture Absorption in Cross-Ply Composite Laminates with Cracks , Journal of Composite Materials, 32(24).10.1177/002199839803202403 ↗