journal article·2010-05

Effect of Compounding and Injection Molding on the Mechanical Properties of Flax Fiber Polypropylene Composites

N.M. Barkoula, S.K. Garkhail, T. Peijs

Publisher page

Abstract

The present study focuses on short flax fiber, as well as long flax fiber-reinforced polypropylene (flax/PP) composites, manufactured by the injection molding method. Compounding of flax with two different grades of PP (with and without maleic anhydride (MA-PP) grafting) is carried out by four methods: kneading process, Henschel kinetic mixer, extrusion compounding, and production of long fiber thermoplastic (LFT) granules through pultrusion. The effect of the compounding method and injection molding on the fiber length and mechanical properties of the composites is being investigated. Furthermore, the effect of fiber—matrix adhesion on the mechanical response is being discussed. It can be concluded that the reduction in fiber length, associated with injection molding, did not affect the tensile properties significantly for the studied systems due to improvements in fiber orientation along the polymer flow direction and increased fiber efficiency through dimensional changes due to fiber opening. The addition of MA-PP led to improvements in the tensile strength of injection-molded composites. Kneader compounded composites showed maximum tensile strength as well as stiffness when compared with other compounding methods.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Natural Fiber Reinforced Composites · Fiber-reinforced polymer composites · Mechanical Behavior of Composites

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Centre for Materials Research, and School of Engineering and Materials Science Queen Mary University of London, Mile End Road E1 4NS, London, UK, Department of Materials Science and Engineering, University of Ioannina PO Box 1186, GR-45 110, Ioannina, Greece

Centre for Materials Research, and School of Engineering and Materials Science Queen Mary University of London, Mile End Road E1 4NS, London, UK, Eindhoven Polymer Laboratories, Eindhoven University of Technology PO Box 513, 5600 MB Eindhoven, The Netherlands

Centre for Materials Research, and School of Engineering and Materials Science Queen Mary University of London, Mile End Road E1 4NS, London, UK, , Eindhoven Polymer Laboratories, Eindhoven University of Technology PO Box 513, 5600 MB Eindhoven, The Netherlands

References (44)

Show source-provided references
1. Turng, L.S. · Journal of Injection Molding Technology · 2001 · 5 · 160
2. 10.1023/A:102659012403810.1023/A:1026590124038 ↗
3. 10.1080/10667857.2000.1175289210.1080/10667857.2000.11752892 ↗
4. 10.4271/2000-01-113310.4271/2000-01-1133 ↗
5. 10.1002/masy.1998127012610.1002/masy.19981270126 ↗
6. 10.1177/09636935960050030310.1177/096369359600500303 ↗
7. 10.1016/j.compstruct.2003.09.01810.1016/j.compstruct.2003.09.018 ↗
8. 10.1177/09636935030120060210.1177/096369350301200602 ↗
9. 10.1007/s10443-006-9010-210.1007/s10443-006-9010-2 ↗
10. Eisele, D. · Textil Praxis International · 1994 · 49 · 68
11. Brouwer, W.D.
12. Karus, M. · Kunststoffe Plast Europe · 2005 · 7 · 1
13. 10.1016/S1359-8368(03)00042-810.1016/S1359-8368(03)00042-8 ↗
14. Karus, M. · 2006
15. Snijder, M.H.B.
16. Van den Oever, M.J.A. · Advanced Composites Letters · 1998 · 7 · 81
17. Hull, D. · 1981
18. 10.1002/adem.20040013810.1002/adem.200400138 ↗
19. 10.1016/1359-835X(95)00065-A10.1016/1359-835X(95)00065-A ↗
20. 10.1016/1359-835X(96)00066-810.1016/1359-835X(96)00066-8 ↗
21. 10.1023/A:101492562125210.1023/A:1014925621252 ↗
22. 10.1023/A:102659432494710.1023/A:1026594324947 ↗
23. 10.1177/09636935010100020510.1177/096369350101000205 ↗
24. 10.1016/S0924-0136(03)00195-X10.1016/S0924-0136(03)00195-X ↗
25. 10.1023/A:102658192222110.1023/A:1026581922221 ↗
26. 10.1142/S021797920604175610.1142/S0217979206041756 ↗
27. 10.1002/pc.1057010.1002/pc.10570 ↗
28. 10.1081/PPT-12002499910.1081/PPT-120024999 ↗
29. 10.1016/S0266-3538(03)00094-010.1016/S0266-3538(03)00094-0 ↗
30. 10.1016/j.compositesa.2005.03.02110.1016/j.compositesa.2005.03.021 ↗
31. 10.1016/j.compositesa.2005.10.01110.1016/j.compositesa.2005.10.011 ↗
32. 10.1177/073168440707553610.1177/0731684407075536 ↗
33. Arbelaiz, A. · Fiber Content, Water Uptake and Recycling, Composites Science and Technology · 2005 · 65 · 1582
34. 10.1016/j.compstruct.2003.09.01810.1016/j.compstruct.2003.09.018 ↗
35. 10.1016/j.matdes.2007.03.02710.1016/j.matdes.2007.03.027 ↗
36. 10.1016/j.tca.2005.10.01610.1016/j.tca.2005.10.016 ↗
37. 10.1016/S1359-835X(01)00032-X10.1016/S1359-835X(01)00032-X ↗
38. 10.1007/s10853-008-3089-910.1007/s10853-008-3089-9 ↗
39. Mieck, K.-P. · 2003
40. 10.1002/adv.1984.06003040510.1002/adv.1984.060030405 ↗
41. 10.1016/0022-5096(65)90035-910.1016/0022-5096(65)90035-9 ↗
42. 10.1002/apmc.1995.05225010410.1002/apmc.1995.052250104 ↗
43. Garkhail, S. · 2001
44. 10.1016/S1359-835X(97)00089-410.1016/S1359-835X(97)00089-4 ↗