Review of material test standardization status for the material qualification of laminated thermosetting composite structures
Source abstract
Abstract
This paper presents a review of recent literature related to the static mechanical testing of thermoset-based carbon fiber reinforced composites and introduces a material qualification methodology to generate statistically-based allowable design values for aerospace application. Although most test methods have been found to be effective in determining the specific material properties by incorporating them into the material qualification and quality control provisions, a full validation to clarify the behavior of thermoset-based laminated composite materials is currently lacking, particularly with regard to the characterization of compressive, in-plane, interlaminar shear, and damage tolerance properties. The present study obtains information on the different types of test method that can be employed within the same material properties, and makes an in-depth experimental comparison based on the past literatures. A discussion on the scope of theoretical analysis involves a description of how the proposed test method can be adequate for obtaining more accurate material properties. This discussion is directly applicable to the assessment of material nonlinearity and the geometrical effect of specimens. Finally, the resulting failure modes and the effect of each material property are studied to aid the understanding of the load distribution and behavior of laminated composite materials.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Mechanical Behavior of Composites · Composite Structure Analysis and Optimization · Structural Analysis of Composite Materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Hyundai Automotive Research & Development Division, Jangduk-dong, Gyeonggi-do, South Korea
Department of Materials Engineering, Korea Aerospace University, Hwajon-dong, Gyeonggi-do, South Korea
References (100+)
Show source-provided references
1. 10.1016/j.compositesb.2015.10.00210.1016/j.compositesb.2015.10.002 ↗
2. 10.1016/j.compositesb.2017.05.05910.1016/j.compositesb.2017.05.059 ↗
3. 10.1016/j.compstruct.2013.09.01110.1016/j.compstruct.2013.09.011 ↗
4. Hoffman DJ and Bielawski WJ. Environmental exposure effects on composite materials for commercial aircraft. Technical report, National Aeronautics and Space Administration. Report no. NASA-CR-187478, 31 December 1990. Seattle, WA: Boeing Commercial Airplane Group.
5. 10.1016/S0034-3617(05)00577-110.1016/S0034-3617(05)00577-1 ↗
6. 10.1016/j.compositesb.2017.10.01610.1016/j.compositesb.2017.10.016 ↗
7. U.S. Department of Transportation. Federal aviation regulation part 25-airworthiness standards: transport category airplanes, www.ecfr.gov/cgi-bin/text-idx?node=14:1.0.1.3.11 (2020, accessed 20 February 2020).
8. 10.1016/j.compstruct.2018.08.06910.1016/j.compstruct.2018.08.069 ↗
9. U.S. Department of Transportation. AC 20-107B – Composite aircraft structure, www.faa.gov/regulations_policies/advisory_circulars/index.cfm/go/document.information/documentID/99693 (2009, accessed 20 February 2020).
10. U.S. Department of Transportation. AC 21-26 – quality control for the manufacture of composite structures, www.faa.gov/regulations_policies/advisory_circulars/index.cfm/go/document.information/documentid/22254 (1989, accessed 20 February 2020).
11. Park SY and Choi WJ. Production control effect on composite material quality and stability for aerospace usage. In: Ehsan B (ed.) Advanced composite materials: properties and applications . Warsaw: De Gruyter Open, 2017, pp. 112–194.10.1515/9783110574432-003 ↗
12. Department of Defense Handbook. Composite Materials Handbook, Volume 1. Polymer matrix composites materials usage, design and analysis. Handbook no. MIL-HDBK-17/1F, 17 June 2002. Washington DC: U.S. Department of Defense.
13. Ashforth C and Ilcewicz L. Certification and compliance considerations for aircraft products with composite materials. In: Beaumont PWR and Zweben CH (eds) Comprehensive composite materials II . Amsterdam: Elsevier, 2018, pp. 1–25.10.1016/B978-0-12-803581-8.09944-6 ↗
14. Ilcewicz L and Ashforth C. Scaling crucial to integrated product development of composite airframe structures. In: Beaumont PWR and Zweben CH (eds) Comprehensive composite materials II . Amsterdam: Elsevier, 2018, pp. 26–90.10.1016/B978-0-12-803581-8.10314-5 ↗
15. 10.1016/j.compositesa.2018.07.02610.1016/j.compositesa.2018.07.026 ↗
16. 10.1016/0263-8223(94)90080-910.1016/0263-8223(94)90080-9 ↗
17. 10.1016/0261-3069(91)90109-H10.1016/0261-3069(91)90109-H ↗
18. 10.1016/0010-4361(91)90001-W10.1016/0010-4361(91)90001-W ↗
19. Sims GD. Development and use of standard test methods. In: Hodgkinson JM (ed.) Mechanical testing of advanced fibre composites . Cambridge, MA: Woodhead Publishing, 2000, pp. 340–358.10.1533/9781855738911.340 ↗
20. Adams DO. Comparative testing to assess the equivalence of CEN and ASTM test methods for composite materials . Technical report, U.S. Department of Transportation. Report no. DOT/FAA/AR-04/50, February 2005. Washington DC: Federal Aviation Administration.
21. 10.2514/1.4128610.2514/1.41286 ↗
22. Tomblin JS, Ng YC and Raju KS. Material qualification and equivalency for polymer matrix composite material systems: updated procedure . Technical report, U.S. Department of Transportation. Report no. DOT/FAA/AR-03/19, September 2003. Washington DC: Federal Aviation Administration.
23. International Organization for Standardization (ISO). Fibre-reinforced plastic composites – standard qualification plan (SQP) for composite materials, including reduced (RQP) and extended (EQP) schemes, www.iso.org/standard/67148.html (2019, accessed 23 February 2020).
24. Gower MRL and Sims GD. Towards a standard qualification plan (SQP) for composite materials – current status of material property databases, http://eprintspublications.npl.co.uk/2614/ (2004, accessed 26 December 2019).
25. Abumeri G, Abdi F, Raju KS, et al. Cost effective computational approach for generation of polymeric composite material allowables for reduced testing. In: Brahim A (ed.) Advances in composite materials - ecodesign and analysis . Rijeka: InTech Open, 2011, pp. 247–270.10.5772/14528 ↗
26. 10.1016/j.compositesb.2010.05.00510.1016/j.compositesb.2010.05.005 ↗
27. Long MW and Narciso JD. Probabilistic design methodology for composite aircraft structures . Technical report, U.S. Department of Transportation. Report no. DOT/FAA/AR-99/2, June 1999. Washington DC: Federal Aviation Administration.
28. 10.1016/S0045-7949(99)00171-610.1016/S0045-7949(99)00171-6 ↗
29. 10.1016/j.compositesb.2011.03.00710.1016/j.compositesb.2011.03.007 ↗
30. 10.1111/j.1475-1305.2008.00521.x10.1111/j.1475-1305.2008.00521.x ↗
31. 10.1016/j.compositesa.2016.01.00710.1016/j.compositesa.2016.01.007 ↗
32. ASTM D695-15. Standard test method for compressive properties of rigid plastics . West Conshohocken, PA: ASTM, 2015.
33. ASTM D3410/D3410M-16. Standard test method for compressive properties of polymer matrix composite materials with unsupported gage section by shear loading . West Conshohocken, PA: ASTM, 2016.
34. ASTM D6641/D6641M-16e1. Standard test method for compressive properties of polymer matrix composite materials using a combined loading compression (CLC) test fixture . West Conshohocken, PA: ASTM, 2016.
35. Lackey E. Identification, selection, and development of composite test standards – A case study from the development of a design standard for composites. In: 9th-annual SPE® automotive composites conference & exhibition , Troy, MI, USA, 15–16 September 2009.
36. 10.1520/CTR10023J10.1520/CTR10023J ↗
37. 10.1023/A:101869203230310.1023/A:1018692032303 ↗
38. Wilhelmsson D, Asp LE, Gutkin R, et al. Effect of specimen width on strength in off-axis compression tests. In: ECCM 17 – 17th European conference on composite materials , Munich, Germany, 26–30 June 2016.
39. 10.1177/002199831558082910.1177/0021998315580829 ↗
40. Joyce PJ, Violette MG and Moon TJ. and Finite element analysis of unidirectional composite compression test specimens: a parametric study. In: Nettles AT and Zureick A (eds) Composite materials: testing, design and acceptance criteria (ASTM STP 1416A) . West Conshohocken, PA: ASTM International, 2002, pp. 30–68.10.1520/STP10630S ↗
41. 10.1016/S0266-3538(98)00181-X10.1016/S0266-3538(98)00181-X ↗
42. 10.1016/j.compstruct.2009.08.01010.1016/j.compstruct.2009.08.010 ↗
43. Leif AC · 2014
44. 10.4028/www.scientific.net/AMR.1135.5210.4028/www.scientific.net/AMR.1135.52 ↗
45. 10.1016/j.compscitech.2009.02.01010.1016/j.compscitech.2009.02.010 ↗
46. 10.1016/j.compscitech.2010.03.00910.1016/j.compscitech.2010.03.009 ↗
47. 10.1016/0045-7949(83)90141-410.1016/0045-7949(83)90141-4 ↗
48. 10.1016/j.engfailanal.2017.05.00610.1016/j.engfailanal.2017.05.006 ↗
49. 10.1016/j.matdes.2014.10.00310.1016/j.matdes.2014.10.003 ↗
50. 10.1016/j.polymertesting.2010.11.00810.1016/j.polymertesting.2010.11.008 ↗
51. 10.1016/S1359-835X(98)00194-810.1016/S1359-835X(98)00194-8 ↗
52. 10.1016/j.compstruct.2017.08.05610.1016/j.compstruct.2017.08.056 ↗
53. 10.1016/S0266-3538(00)00141-X10.1016/S0266-3538(00)00141-X ↗
54. 10.1016/S0266-3538(03)00254-910.1016/S0266-3538(03)00254-9 ↗
55. 10.1016/j.compstruct.2006.05.02510.1016/j.compstruct.2006.05.025 ↗
56. ASTM D3518/D3518M-18. Standard test method for in-plane shear response of polymer matrix composite materials by tensile test of a ±45° laminate . West Conshohocken, PA: ASTM, 2018.
57. ASTM D4255/D4255M-15a. Standard test method for in-plane shear properties of polymer matrix composite materials by the rail shear method . West Conshohocken, PA: ASTM, 2015.
58. ASTM D5379/D5379M-19. Standard test method for shear properties of composite materials by the v-notched beam method . West Conshohocken, PA: ASTM, 2019.
59. ASTM D7078/D7078M-19. Standard test method for shear properties of composite materials by v-notched rail shear method . West Conshohocken, PA: ASTM, 2019.
60. 10.1016/j.dib.2016.01.01010.1016/j.dib.2016.01.010 ↗
61. 10.1016/j.compositesa.2015.04.01210.1016/j.compositesa.2015.04.012 ↗
62. 10.1016/j.compscitech.2016.02.00810.1016/j.compscitech.2016.02.008 ↗
63. 10.1016/0010-4361(90)90422-S10.1016/0010-4361(90)90422-S ↗
64. 10.1016/j.compscitech.2005.04.01410.1016/j.compscitech.2005.04.014 ↗
65. Marlett K, Ng Y and Tomblin J. Hexcel 8552 AS4 unidirectional prepreg 190 gsm & 35% RC qualification material property data report . Test Report, National Institute for Aviation Research. Report no. CAM-RP-2010-002 Rev A, 6 May 2011. Wichita, KS: Wichita State University.
66. Lovingfoss R, Lian E and Hooper E. Solvay Cytec Cycom 5320-1 T650 unitape qualification material property data report. Test Report, National Institute for Aviation Research. Report no. CAM-RP-2013-002 Rev A, 27 January 2017. Wichita, KS: Wichita State University.
67. 10.1016/j.polymertesting.2013.01.01510.1016/j.polymertesting.2013.01.015 ↗
68. 10.1177/07316844950140090410.1177/073168449501400904 ↗
69. 10.1016/0010-4361(86)90729-910.1016/0010-4361(86)90729-9 ↗
70. 10.1177/00219983870210060110.1177/002199838702100601 ↗
71. 10.1007/BF0232868810.1007/BF02328688 ↗
72. 10.1016/0010-4361(85)90605-610.1016/0010-4361(85)90605-6 ↗
73. 10.1016/S0266-3538(97)00099-710.1016/S0266-3538(97)00099-7 ↗
74. 10.1177/00219983990330210210.1177/002199839903302102 ↗
75. 10.1007/BF0001979310.1007/BF00019793 ↗
76. 10.1002/pc.75011050610.1002/pc.750110506 ↗
77. Tomblin J, McKenna J, Ng Y, et al. B-basis design allowables for epoxy-based prepreg 3M S-glass unitape S2/SP381 . Test Report, National Institute for Aviation Researc. Report no. AGATE-WP33. 033051-099, September 2001. Wichita, KS: Wichita State University.
78. Tomblin J, McKenna J, Ng Y, et al. B-basis design allowables for epoxy-based prepreg Fiberite plain weave graphite fabric 650 3K-70-PW/7740. Test Report, National Institute for Aviation Researc. Report no. AGATE-WP3.3-033051-100, September 2001. Wichita, KS: Wichita State University.
79. 10.1016/j.compositesa.2018.02.01110.1016/j.compositesa.2018.02.011 ↗
80. 10.1016/j.compstruct.2006.06.01610.1016/j.compstruct.2006.06.016 ↗
81. 10.1520/CTR10892J10.1520/CTR10892J ↗
82. 10.1520/JTE11475J10.1520/JTE11475J ↗
83. 10.1016/j.compstruct.2017.04.06810.1016/j.compstruct.2017.04.068 ↗
84. 10.1016/0266-3538(94)90023-X10.1016/0266-3538(94)90023-X ↗
85. 10.1080/10759419930554810.1080/107594199305548 ↗
86. Neumeister JM and Melin LN. A modified iosipescu test for anisotropic composite panels. In: 14th international conference on composite materials (ICCM-14), San Diego, CA, USA, 14–18 July 2003, paper no. 1835.
87. 10.1016/S1359-8368(02)00022-710.1016/S1359-8368(02)00022-7 ↗
88. 10.1016/S0266-3538(97)00099-710.1016/S0266-3538(97)00099-7 ↗
89. 10.1177/002199830203600558510.1177/0021998302036005585 ↗
90. 10.1016/j.proeng.2013.12.05210.1016/j.proeng.2013.12.052 ↗
91. 10.1016/j.compositesb.2016.08.01710.1016/j.compositesb.2016.08.017 ↗
92. Neumeister JM and Melin LN. Specimen clamping and performance of the Ioisipescu shear tests applied for composite materials. In: 16th international conference on composite materials (ICCM-16) , Kyoto, Japan, 3–8 July 2007, paper no. WeBM1-06sp_neumeisterj22660.
93. Melin LN and Neumeister JM. Sensitivity of specimen imperfections of Ioisipescu shear for composite laminates. In: 16th international conference on composite materials (ICCM-16) , Kyoto, Japan, 3–8 July 2007, paper no. WeBM1-05sp_melinn226608p.
94. 10.1016/0266-3538(90)90018-Z10.1016/0266-3538(90)90018-Z ↗
95. 10.1177/002199830606336910.1177/0021998306063369 ↗
96. 10.1016/j.compscitech.2010.02.01410.1016/j.compscitech.2010.02.014 ↗
97. 10.1177/07316844870060040110.1177/073168448700600401 ↗
98. 10.1016/j.polymertesting.2017.11.00810.1016/j.polymertesting.2017.11.008 ↗
99. 10.1016/j.polymertesting.2015.03.00710.1016/j.polymertesting.2015.03.007 ↗
100. 10.1007/s10409-019-00921-710.1007/s10409-019-00921-7 ↗