Enhancing mechanical, degradation, and tribological properties of biocomposites via treatment and alumina content
Source abstract
Abstract
The objective of this study is to investigate the effects of alumina filler content and NaOH-treated Roselle fibers on mechanical, thermal, biodegradation, and tribological properties while identifying optimal conditions for eco-friendly applications. Compression molding was employed to fabricate composites, and the results revealed significant improvements in performance with chemical treatment and optimal filler content. Mechanical testing showed that the 10% alumina composite exhibited the highest tensile, flexural, and impact strengths due to enhanced interfacial bonding and uniform filler dispersion. Thermal analysis demonstrated improved stability, with the 10% alumina composite offering the best thermal degradation resistance. Biodegradation studies indicated slower weight loss for alumina-filled composites, highlighting their environmental durability. Tribological evaluations revealed that the 10% alumina composite achieved the lowest specific wear rate (SWR) and coefficient of friction (COF), supported by SEM analysis showing minimal wear debris and surface damage. Optimization using a simulated annealing algorithm identified ideal conditions (sliding velocity: 6.6 m/s, sliding distance: 500.33 m, and alumina content: 10.62%) that minimized SWR (13.28 × 10⁻⁵ mm³/Nm) and COF (0.278). These findings provide valuable insights into Roselle fiber composites for sustainable applications in the automotive and packaging industries.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Natural Fiber Reinforced Composites · Tribology and Wear Analysis · biodegradable polymer synthesis and properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Villa College
Easwari Engineering College
Kongundau College of Engineering and Technology
References (59)
Show source-provided references
1. 10.1002/pc.2748910.1002/pc.27489 ↗
2. 10.1016/j.rinma.2022.10035510.1016/j.rinma.2022.100355 ↗
3. 10.1016/j.matpr.2022.12.05910.1016/j.matpr.2022.12.059 ↗
4. 10.1002/pc.2727410.1002/pc.27274 ↗
5. 10.1016/j.jmrt.2023.06.01910.1016/j.jmrt.2023.06.019 ↗
6. 10.1016/j.measurement.2024.11491210.1016/j.measurement.2024.114912 ↗
7. 10.1080/14488353.2022.211464410.1080/14488353.2022.2114644 ↗
8. 10.1016/j.rineng.2023.10127110.1016/j.rineng.2023.101271 ↗
9. 10.1007/s11837-022-05670-w10.1007/s11837-022-05670-w ↗
10. 10.1080/19648189.2023.221419810.1080/19648189.2023.2214198 ↗
11. 10.1016/j.polymertesting.2023.10808310.1016/j.polymertesting.2023.108083 ↗
12. 10.1080/15440478.2023.228371610.1080/15440478.2023.2283716 ↗
13. 10.1016/j.matchemphys.2024.13017510.1016/j.matchemphys.2024.130175 ↗
14. 10.1016/j.matpr.2020.07.37210.1016/j.matpr.2020.07.372 ↗
15. 10.1155/2022/138473810.1155/2022/1384738 ↗
16. 10.1016/j.matpr.2020.12.11710.1016/j.matpr.2020.12.117 ↗
17. 10.1080/09276440.2016.118455610.1080/09276440.2016.1184556 ↗
18. 10.1177/152808371771447910.1177/1528083717714479 ↗
19. 10.1177/073168440936057810.1177/0731684409360578 ↗
20. 10.1515/epoly-2022-008010.1515/epoly-2022-0080 ↗
21. 10.1177/073168441559119910.1177/0731684415591199 ↗
22. 10.1177/073168441774774210.1177/0731684417747742 ↗
23. 10.1080/03602559.2017.133220610.1080/03602559.2017.1332206 ↗
24. Radzi AM, Sapuan SM, Jawaid M, et al. A review on roselle fibre reinforced polymer composite. Pros Semin Enau Kebangs 2019; 2019: 101–103.
25. 10.1002/pc.2592710.1002/pc.25927 ↗
26. 10.1007/s10853-016-0546-810.1007/s10853-016-0546-8 ↗
27. 10.1007/s10854-017-7188-810.1007/s10854-017-7188-8 ↗
28. 10.1007/s13399-023-04572-410.1007/s13399-023-04572-4 ↗
29. 10.1007/s13399-023-04718-410.1007/s13399-023-04718-4 ↗
30. 10.7603/s40632-015-0025-410.7603/s40632-015-0025-4 ↗
31. 10.1002/pc.2681010.1002/pc.26810 ↗
32. 10.1088/2053-1591/ab66fa10.1088/2053-1591/ab66fa ↗
33. 10.1080/20550324.2018.156261410.1080/20550324.2018.1562614 ↗
34. 10.1177/002199831769542010.1177/0021998317695420 ↗
35. Sathiyamurthy S, Saravanakumar S, Ananthi N, et al. Optimization of fiber length and filler content for improving the mechanical behaviour of musa acuminate fiber-reinforced epoxy composite using response surface methodology. J Ceram Process Res 2023; 24: 683–692.
36. 10.1007/s12221-024-00638-w10.1007/s12221-024-00638-w ↗
37. 10.1080/09276440.2023.226023910.1080/09276440.2023.2260239 ↗
38. Sathiyamurthy S, Vinoth V, Saravanakumar S, et al. Investigation on mechanical behaviour of calcium carbonate and groundnut shell filler added cocos nucifera fiber reinforced polyester composites. ARPN J Eng Appl Sci 2023; 18: 1425–1432.
39. 10.1007/s12221-023-00405-310.1007/s12221-023-00405-3 ↗
40. 10.1002/pc.2841810.1002/pc.28418 ↗
41. 10.1007/s12666-014-0423-610.1007/s12666-014-0423-6 ↗
42. 10.1080/09276440.2024.244887910.1080/09276440.2024.2448879 ↗
43. Qureshi MN, Badgujar A, Khan A. Investigation of chicken feather fiber / poly-lactic acid reinforced composites prepared using the sandwich method. Int J Mater Eng Innov 2023; 14: 1.10.1504/IJMATEI.2023.10049058 ↗
44. 10.1177/073168442096021010.1177/0731684420960210 ↗
45. Sathiyamurthy S Saravanakumar S Vinoth V. Enhancing tribological performance of hybrid fiber-reinforced composites through machine learning and response surface methodology. J Reinf Plast Compos 2024. Epub ahead of print. DOI: 10.1177/07316844241256421.10.1177/07316844241256421 ↗
46. 10.3390/polym1319329910.3390/polym13193299 ↗
47. Zin MH, Abdan K, Norizan MN, et al. The effects of alkali treatment on the mechanical and chemical properties of banana fibre and adhesion to epoxy resin. Pertanika J Sci Technol 2018; 26: 161–176.
48. 10.1007/s10853-019-03990-y10.1007/s10853-019-03990-y ↗
49. Aynalem GF Sirahbizu B. Effect of Al2O3 on the tensile and impact strength of flax/unsaturated polyester composite with emphasis on automobile body applications. Adv Mater Sci Eng 2021. Epub ahead of print 2021. DOI: 10.1155/2021/6641029.10.1155/2021/6641029 ↗
50. Raju BR, Suresha RPSB, Bharath KN. The effect of silicon dioxide filler on the wear resistance of glass fabric reinforced epoxy composites. Adv Polym Sci Technol An Int J 2012; 2: 51–57.
51. 10.1002/pc.2749110.1002/pc.27491 ↗
52. 10.1155/2020/372104710.1155/2020/3721047 ↗
53. 10.1016/j.compscitech.2012.08.02010.1016/j.compscitech.2012.08.020 ↗
54. 10.1016/j.matchemphys.2020.12380910.1016/j.matchemphys.2020.123809 ↗
55. 10.1177/073168441558478410.1177/0731684415584784 ↗
56. 10.1007/s10163-022-01357-110.1007/s10163-022-01357-1 ↗
57. 10.1177/073168442092155410.1177/0731684420921554 ↗
58. 10.1007/s13369-022-07354-810.1007/s13369-022-07354-8 ↗
59. 10.3390/ma1503074910.3390/ma15030749 ↗