journal article·2024-01

Effect of build orientation on tribological and flexural properties of FDM-printed composite PLA parts

Paşa Yaman, Olcay Ekşi, Sencer Süreyya Karabeyoğlu, Kamil Feratoğlu

Publisher page

Abstract

In the study, parts are fused deposition modeling–printed using polylactic acid filaments filled with copper, brass, bronze, tungsten, and carbon fiber. Wear and three-point bending tests are applied to FDM-printed specimens and it is yielded that on-edge oriented specimens had higher flexural strength while flat orientation contributed to wear resistance. Wear tracks are examined, and mostly abrasive wear is detected in the dry sliding condition while adhesive, fatigue and abrasive wear is observed in the wet sliding condition. Brass-filled polylactic acid specimens showed highest flexural strength and flexural modulus with 46.73 MPa and 1.53 GPa, respectively. Besides, the most wear resistant filler is determined as tungsten for dry and wet sliding conditions.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Additive Manufacturing and 3D Printing Technologies · biodegradable polymer synthesis and properties · Tribology and Wear Analysis

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Department of Mechanical Engineering, Kirklareli University, Kayali Campus, Merkez, Kirklareli, Turkey

References (56)

Show source-provided references
1. 10.3390/jcs607020210.3390/jcs6070202 ↗
2. 10.1515/polyeng-2021-019210.1515/polyeng-2021-0192 ↗
3. 10.1016/j.matpr.2022.03.44410.1016/j.matpr.2022.03.444 ↗
4. 10.1016/j.polymertesting.2013.07.01410.1016/j.polymertesting.2013.07.014 ↗
5. 10.1016/j.prostr.2022.05.06410.1016/j.prostr.2022.05.064 ↗
6. 10.1016/j.addma.2021.10194410.1016/j.addma.2021.101944 ↗
7. Sikder P · Mater · 2022 · 22 · 101427
8. 10.1007/s10853-021-06820-210.1007/s10853-021-06820-2 ↗
9. 10.3390/polym1311182210.3390/polym13111822 ↗
10. 10.1007/s13399-022-02581-310.1007/s13399-022-02581-3 ↗
11. 10.1007/s00289-022-04135-z10.1007/s00289-022-04135-z ↗
12. 10.1016/j.addr.2016.03.01010.1016/j.addr.2016.03.010 ↗
13. 10.1177/002199831347746110.1177/0021998313477461 ↗
14. 10.1002/1521-4095(200012)12:23<1841::AID-ADMA1841>3.0.CO;2-E10.1002/1521-4095(200012)12:23<1841::AID-ADMA1841>3.0.CO;2-E ↗
15. 10.1039/9781782624806-0000110.1039/9781782624806-00001 ↗
16. 10.3390/ma1509298910.3390/ma15092989 ↗
17. 10.1590/0104-1428.198610.1590/0104-1428.1986 ↗
18. 10.3390/polym1102034910.3390/polym11020349 ↗
19. 10.3390/jmmp303006410.3390/jmmp3030064 ↗
20. Dezaki ML · Polymers · 2020 · 12 · 1
21. 10.3139/120.11117810.3139/120.111178 ↗
22. 10.1108/RPJ-06-2017-013410.1108/RPJ-06-2017-0134 ↗
23. 10.26701/ems.88125410.26701/ems.881254 ↗
24. 10.1016/j.ceramint.2022.07.11710.1016/j.ceramint.2022.07.117 ↗
25. 10.1016/j.matpr.2020.11.85810.1016/j.matpr.2020.11.858 ↗
26. 10.1016/j.polymertesting.2020.10678510.1016/j.polymertesting.2020.106785 ↗
27. 10.1016/j.compositesb.2019.10714710.1016/j.compositesb.2019.107147 ↗
28. 10.1016/j.compositesb.2021.10919210.1016/j.compositesb.2021.109192 ↗
29. 10.1016/j.compscitech.2022.10933310.1016/j.compscitech.2022.109333 ↗
30. 10.1007/s00170-021-08289-410.1007/s00170-021-08289-4 ↗
31. 10.1007/s13369-021-05980-210.1007/s13369-021-05980-2 ↗
32. 10.1016/j.jmrt.2019.06.03410.1016/j.jmrt.2019.06.034 ↗
33. Maqsood N · JCOMC · 2021 · 4 · 100112
34. 10.3390/polym1423523010.3390/polym14235230 ↗
35. 10.1007/s40964-021-00255-610.1007/s40964-021-00255-6 ↗
36. 10.1007/s00170-020-05391-x10.1007/s00170-020-05391-x ↗
37. 10.3390/jcs401001710.3390/jcs4010017 ↗
38. 10.3390/polym1420430110.3390/polym14204301 ↗
39. 10.1177/0892705721105303610.1177/08927057211053036 ↗
40. 10.1002/app.5157410.1002/app.51574 ↗
41. 10.3390/ijms1208533010.3390/ijms12085330 ↗
42. 10.1016/S0300-5712(03)00091-510.1016/S0300-5712(03)00091-5 ↗
43. 10.3390/polym1320360510.3390/polym13203605 ↗
44. 10.3390/polym1107109410.3390/polym11071094 ↗
45. 10.1021/acssuschemeng.7b0235110.1021/acssuschemeng.7b02351 ↗
46. 10.1016/j.polymertesting.2018.09.00910.1016/j.polymertesting.2018.09.009 ↗
47. 10.1016/j.jmrt.2021.10.10810.1016/j.jmrt.2021.10.108 ↗
48. 10.3390/polym1212297510.3390/polym12122975 ↗
49. 10.1155/2018/176318210.1155/2018/1763182 ↗
50. 10.1177/073168441775047710.1177/0731684417750477 ↗
51. 10.1016/j.jmrt.2021.08.06110.1016/j.jmrt.2021.08.061 ↗
52. 10.1016/j.matpr.2020.03.68910.1016/j.matpr.2020.03.689 ↗
53. 10.3390/ma204236910.3390/ma2042369 ↗
54. 10.1007/s11740-022-01164-510.1007/s11740-022-01164-5 ↗
55. 10.1002/pc.2280910.1002/pc.22809 ↗
56. Liu X · Int J Polym Sci · 2014 · 2014 · 1