journal article·2011-03Open access

Experimental and numerical investigation of Mode II fracture in fibrous reinforced composites

Konstantinos N. Anyfantis, Nicholas G. Tsouvalis

Abstract

A straightforward procedure is described for utilizing experimentally evaluated bridging laws that characterize Mode II fracture growth of composite materials into numerical simulations. Unidirectional glass/epoxy end notch flexure (ENF) coupons have been fabricated and tested. Three data reduction schemes available in the literature were used for the construction of the R-curves together with the J-integral approach for the derivation of the bridging laws. Two traction— separation models have been utilized for the characterization of the fracture process zone (FPZ) developing during the delamination propagation process. The first model considers only the existence of a bridging zone behind the physical crack tip, whereas the proposed model considers both the existence of a bridging zone and of a cohesive zone in front of the physical crack tip. The traction—separation models were implemented into interface elements for the simulation of the ENF tests. Numerical results have shown that the proposed procedure together with the proposed traction— separation model is quite promising for simulations that involve Mode II fracture growth.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Mechanical Behavior of Composites · Fatigue and fracture mechanics · Numerical methods in engineering

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Shipbuilding Technology Laboratory, School of Naval Architecture and Marine Engineering, National Technical University of Athens, Greece

Shipbuilding Technology Laboratory, School of Naval Architecture and Marine Engineering, National Technical University of Athens, Greece,

References (21)

Show source-provided references
1. Russell AJ and Street KN Factors affecting the interlaminar fracture energy of graphite/epoxy of graphite/epoxy laminates. In: Hayashi T , Kawata K and Omekawa S (eds) Progress in Science and Engineering of Composites. Tokyo : ICCM-IV, ASM Int., 1982, pp.279.
2. 10.1016/j.engfracmech.2006.05.02210.1016/j.engfracmech.2006.05.022 ↗
3. 10.1179/14658019910154056510.1179/146580199101540565 ↗
4. Schuecker C. and Davidson BD Effects of friction on the perceived mode II delamination toughness from three- and four-point bend end-notched flexure tests. In: Grant P and Rousseau CQ (eds) Composite structure, theory and practice. West Conshohocken, PA: American Society of Testing and Materials, ASTM STP 1383, 2000, pp.334-344.10.1520/STP14518S ↗
5. 10.1177/00219983950290060810.1177/002199839502900608 ↗
6. 10.1098/rspa.1990.000710.1098/rspa.1990.0007 ↗
7. 10.1520/STP10417S10.1520/STP10417S ↗
8. O’ Brien TK Composite interlaminar shear fracture toughness, GIIc: shear measurement or sheer myth? In: Bucinell RB (ed.) Composite materials: fatigue and fracture. Vol. 7. Philadelphia: American Society of Testing and Materials, ASTM STP 1330, 1998, pp.3-18.10.1520/STP13263S ↗
9. 10.1016/j.compscitech.2008.11.02510.1016/j.compscitech.2008.11.025 ↗
10. 10.1016/j.compscitech.2005.10.01310.1016/j.compscitech.2005.10.013 ↗
11. 10.1016/0022-5096(92)90198-B10.1016/0022-5096(92)90198-B ↗
12. 10.4028/www.scientific.net/AMM.24-25.24510.4028/www.scientific.net/AMM.24-25.245 ↗
13. 10.1177/00219983860200060610.1177/002199838602000606 ↗
14. 10.1520/STP36314S10.1520/STP36314S ↗
15. Irwin RG · Weld J Res Suppl · 1954 · 33 · 193
16. 10.1016/0266-3538(92)90096-L10.1016/0266-3538(92)90096-L ↗
17. 10.1016/j.engfracmech.2007.03.00510.1016/j.engfracmech.2007.03.005 ↗
18. 10.1016/j.ijsolstr.2008.12.00110.1016/j.ijsolstr.2008.12.001 ↗
19. 10.1016/j.ijsolstr.2006.04.03610.1016/j.ijsolstr.2006.04.036 ↗
20. 10.1016/S0013-7944(00)00131-410.1016/S0013-7944(00)00131-4 ↗
21. 10.1115/1.360120610.1115/1.3601206 ↗