Pressure distribution for automated fiber placement and design optimization of compaction rollers
Source abstract
Abstract
During automated fiber placement, insufficient compaction pressure leads to low bond strength between layers and may cause defects like bridging. The compaction roller contacts the prepreg and affects the pressure distribution directly. In this article, a model for analyzing the adaptability of rollers to molds is established. Then, compaction pressure distribution on prepreg tows is analyzed by finite element simulation and verified by pressure sensitive film experiment. Based on the simulation results, a calculation method of pressure uniformity is proposed. Moreover, the design parameters of the roller are optimized with an aim of improving pressure uniformity. The results show that the pressure uniformity can be improved significantly by design optimization of the roller, which indicated that higher bond quality between layers is achieved.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Injection Molding Process and Properties · Epoxy Resin Curing Processes · Iterative Learning Control Systems
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
State Key Laboratory of Fluid Power and Mechatronic Systems, School of Mechanical Engineering, Zhejiang University, Hangzhou, China
Key Laboratory of Advanced Manufacturing Technology of Zhejiang Province, School of Mechanical Engineering, Zhejiang University, Hangzhou, China
References (26)
Show source-provided references
1. 10.1016/j.compositesa.2015.07.02310.1016/j.compositesa.2015.07.023 ↗
2. Baker B · 2004
3. 10.1016/j.compositesb.2011.12.00310.1016/j.compositesb.2011.12.003 ↗
4. 10.1016/j.compositesa.2011.01.00710.1016/j.compositesa.2011.01.007 ↗
5. Hassan N, Thompson JE, Batra RC, et al. A heat transfer analysis of the fiber placement composite manufacturing process. J Reinf Plast Compos 2005; 24: 869–888.10.1177/0731684405047773 ↗
6. 10.1007/s00170-010-3028-110.1007/s00170-010-3028-1 ↗
7. 10.1016/j.compositesa.2007.05.00310.1016/j.compositesa.2007.05.003 ↗
8. 10.1177/08927057970100060410.1177/089270579701000604 ↗
9. 10.1016/j.compositesa.2018.03.03610.1016/j.compositesa.2018.03.036 ↗
10. 10.1002/adv.2017710.1002/adv.20177 ↗
11. 10.1177/09673911100180010110.1177/096739111001800101 ↗
12. 10.1177/073168441561363410.1177/0731684415613634 ↗
13. 10.1016/j.compositesa.2011.10.01410.1016/j.compositesa.2011.10.014 ↗
14. 10.1177/073168441770407510.1177/0731684417704075 ↗
15. Lamontia MA, Gruber MB, Waibel BJ, et al. Conformable compaction system used in automated fiber placement of large composite aerospace structures. In: 23rd Sampe Europe Conference , Paris. 2002; pp. 9–11.
16. 10.1515/secm-2013-015810.1515/secm-2013-0158 ↗
17. 10.1016/j.promfg.2016.11.01310.1016/j.promfg.2016.11.013 ↗
18. DeVlieg R, Jeffries K, Vogeli P. High-speed fiber placement on large complex structures. SAE Technical Paper 2007-01-3843, Warrendale, PA: SAE International. 2007.10.4271/2007-01-3843 ↗
19. Mischler PL, Tingley MC, Hoffmann K. Compaction roller for a fiber placement machine. Patent 7810539B2, USA, 2010.
20. Johnson BA. Conformable compaction apparatus for use with a fiber placement machine. Patent 6390169B1, USA, 2002.
21. Lukaszewicz D-J, Potter K. Through-thickness compression response of uncured prepreg during manufacture by automated layup.Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture 2012; 226: 193–202.10.1177/0954405411411817 ↗
22. Cheng J, Zhao D, Liu K, et al. Modeling and impact analysis on contact characteristic of the compaction roller for composite automated placement. J Reinf Plast Compos 2018; 37: 1418–1432.10.1177/0731684418798151 ↗
23. Johnson KL · 1987
24. 10.1177/00219983950290140710.1177/002199839502901407 ↗
25. 10.3139/978344642871310.3139/9783446428713 ↗
26. Li XL, Guo XF, Chen P, et al. Structure analysis and load distribution calculation of cast iron bearing base. Foundry Technology 2011; 32: 538–542. (in Chinese).