Study of influence of interlocking patterns on the mechanical performance of 3D multilayer woven composites
Source abstract
Abstract
Three-dimensional multilayer woven composites are mostly used in high-performance applications due to their excellent out-of-plane mechanical performance. The current research presents an experimental investigation on the mechanical behavior of three-dimensional orthogonal layer-to-layer interlock composites. The glass filament yarn and carbon tows were used as reinforcement in warp and weft directions respectively, whereas epoxy was used as a resin for composite fabrication. Three different types of orthogonal layer to layer interlock namely warp, weft, and bi-directional interlock composites were fabricated and the effect of interlocking pattern on their mechanical performance was evaluated. The evaluation of the mechanical performance was made on the basis of tensile strength, impact strength, flexural strength, and dynamic mechanical analysis of composites in warp and weft directions. It was found that warp and weft interlock composites showed better tensile behavior as compared to bi-directional interlock composite both in the warp and weft directions, due to the presence of less crimp as compared to the bi-directional interlock composite. However, the bi-directional interlock composite exhibited considerably superior impact strength and three-point bending strength as compared to the other structures under investigation. These superior properties of bi-directional interlock composites were achieved by interlocking points in warp and weft directions simultaneously, creating a more compact and isotropic structure. Tan delta values of dynamic mechanical analysis results showed that bi-directional interlock composite displayed the highest capacity of energy dissipation in the warp and weft directions while weft interlock structures displayed highest storage and loss moduli in the warp direction.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Mechanical Behavior of Composites · Textile materials and evaluations · Additive Manufacturing and 3D Printing Technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Textile Composite Materials Research Group, Faculty of Engineering and Technology, National Textile University, Faisalabad, Pakistan
Vocational School of Technical Sciences, Uludag University, Gorukle, Bursa, Turkey
References (58)
Show source-provided references
1. 10.1016/S1359-835X(98)00053-010.1016/S1359-835X(98)00053-0 ↗
2. 10.1080/0040500960865905910.1080/00405009608659059 ↗
3. 10.1080/0040500010865957010.1080/00405000108659570 ↗
4. 10.1177/152808370909201410.1177/1528083709092014 ↗
5. Behera BK and · Indian J Fibre Text Res · 2008 · 33 · 274
6. 10.1016/S0266-3538(03)00021-610.1016/S0266-3538(03)00021-6 ↗
7. 10.1177/00405175030730010710.1177/004051750307300107 ↗
8. 10.1080/00405000.2012.67626710.1080/00405000.2012.676267 ↗
9. 10.1177/004051751039247110.1177/0040517510392471 ↗
10. 10.1177/073168441560895810.1177/0731684415608958 ↗
11. 10.1080/0040500990865869310.1080/00405009908658693 ↗
12. Chen X, Knox RT, Mckenna DF, et al. Relation between linear linkage and mechanical properties of 3D woven textile structures. In: Technical Research Centre of Finland: Textiles and Composites , Tempere, Finland (SEE N 93-21129 07-24), 1992, pp. 166–172.
13. 10.1016/j.compositesa.2014.01.00310.1016/j.compositesa.2014.01.003 ↗
14. 10.1177/073168441244432510.1177/0731684412444325 ↗
15. 10.1016/j.compscitech.2008.09.03310.1016/j.compscitech.2008.09.033 ↗
16. 10.1016/S1359-835X(99)00034-210.1016/S1359-835X(99)00034-2 ↗
17. 10.1016/S0261-3069(02)00053-510.1016/S0261-3069(02)00053-5 ↗
18. Pankow M, Yen C, Rudolph M, et al. Experimental investigation on the deformation response of hybrid 3D woven composites. In: 53rd structures, structural dynamics and materials conference , Hawaii, 2012, pp. 1–19.10.2514/6.2012-1572 ↗
19. 10.1016/j.compositesa.2014.11.01210.1016/j.compositesa.2014.11.012 ↗
20. 10.1016/j.ijsolstr.2015.04.02010.1016/j.ijsolstr.2015.04.020 ↗
21. 10.1016/j.ijsolstr.2015.06.03310.1016/j.ijsolstr.2015.06.033 ↗
22. 10.1016/j.compstruct.2016.01.10010.1016/j.compstruct.2016.01.100 ↗
23. 10.1016/S1359-835X(99)00070-610.1016/S1359-835X(99)00070-6 ↗
24. 10.1016/j.compositesa.2016.08.02810.1016/j.compositesa.2016.08.028 ↗
25. 10.1016/j.ijimpeng.2016.02.01610.1016/j.ijimpeng.2016.02.016 ↗
26. 10.1177/073168440910315310.1177/0731684409103153 ↗
27. 10.1016/j.compositesa.2008.03.00110.1016/j.compositesa.2008.03.001 ↗
28. 10.1016/j.compstruct.2006.08.01110.1016/j.compstruct.2006.08.011 ↗
29. 10.1002/pc.2020810.1002/pc.20208 ↗
30. 10.1080/00405000.2013.81226610.1080/00405000.2013.812266 ↗
31. 10.1177/002199831349053910.1177/0021998313490539 ↗
32. 10.1016/j.msea.2011.10.08410.1016/j.msea.2011.10.084 ↗
33. 10.1016/j.matdes.2014.11.02010.1016/j.matdes.2014.11.020 ↗
34. 10.1007/s10853-015-9640-610.1007/s10853-015-9640-6 ↗
35. 10.1016/j.compstruct.2016.06.03410.1016/j.compstruct.2016.06.034 ↗
36. 10.1016/j.compositesa.2015.06.01310.1016/j.compositesa.2015.06.013 ↗
37. 10.1016/j.compositesb.2014.11.00310.1016/j.compositesb.2014.11.003 ↗
38. 10.1016/j.compositesb.2015.07.01310.1016/j.compositesb.2015.07.013 ↗
39. 10.1016/B978-1-78242-214-3.00003-610.1016/B978-1-78242-214-3.00003-6 ↗
40. Miller WT and, Pusch RH. Woven multi-layer angle interlock fabrics and methods of making same . EP 0 422,293 A1, European Patent Office, 1991.
41. Miller WT, Calamito DP and, Push RH. Woven multi-layer angle interlock fabrics having fill weaver yarns interwoven with relatively straight extending warp yarns . United States Patent 4,958,663, USA, 1990.
42. http://texgen.sourceforge.net/.
43. 10.1080/0021846870808046910.1080/00218468708080469 ↗
44. 10.1016/j.compscitech.2004.07.00310.1016/j.compscitech.2004.07.003 ↗
45. 10.1016/0266-3538(91)90072-W10.1016/0266-3538(91)90072-W ↗
46. 10.1080/1944702590866249010.1080/19447025908662490 ↗
47. Ashraf W · J Text Inst · 2016 · 1
48. 10.1016/j.compstruct.2012.07.02210.1016/j.compstruct.2012.07.022 ↗
49. 10.1016/j.compositesa.2004.07.00810.1016/j.compositesa.2004.07.008 ↗
50. 10.1016/j.compscitech.2005.11.00510.1016/j.compscitech.2005.11.005 ↗
51. 10.1016/0266-3538(92)90119-N10.1016/0266-3538(92)90119-N ↗
52. 10.1016/j.compstruct.2006.08.01910.1016/j.compstruct.2006.08.019 ↗
53. Aiman DPC, Yahya MF, Salleh J, et al. Impact properties of 2D and 3D woven composites : A review. In: International conference on advanced science, engineering and technology. AIP conference proceedings, 2015, pp. 20002-1-6.10.1063/1.4965050 ↗
54. 10.1016/j.compscitech.2003.10.00110.1016/j.compscitech.2003.10.001 ↗
55. 10.1177/002199831037794310.1177/0021998310377943 ↗
56. Kaka D, Rongong J, Hodzic A, et al. Dynamic mechanical properties of woven carbon fibre reinforced thermoplastic composite. In: 20th international conference on composite materials. Copenhagen, Denmark 2015, pp. 1–13.
57. 10.1016/j.matpr.2015.07.28310.1016/j.matpr.2015.07.283 ↗
58. 10.5604/12303666.120113910.5604/12303666.1201139 ↗