Three Models of the 3D Filling Simulation for Injection Molding: A Brief Review
Source abstract
Abstract
This article reviews the state-of-the-art research and development in the 3D filling simulation of injection molding, most notably the different models. The article organizes prior studies into three sequential categories, namely, mid-plane models, surface models, and solid models. In the mid-plane models, the arbitrary planar mid-plane is used to represent the three-dimensional geometry of the part. Their model and formulation are presented based on the Hele—Shaw approximation. The article further discusses the main disadvantage of the mid-plane models, which introduces the surface models. The surface models represent a three-dimensional part with a boundary or skin mesh on the outside surfaces of a solid geometric model. This kind of model still adopts the Hele—Shaw approximation, but can avoid the re-modeling of the mid-plane. Subsequently, the situations that cannot be accurately predicted using the Hele—Shaw approximation are discussed, in which a full 3D simulation has become a promising solution. The leading 3D simulation approaches are summarized, including the finite element method, the finite volume method, the control-volume-based finite-element-method, and the boundary element method. The tracking algorithms of the melt fronts are also described.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Injection Molding Process and Properties · Advanced Numerical Analysis Techniques · Manufacturing Process and Optimization
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Woodruff School of Mechanical Engineering Georgia Institute of Technology, Atlanta, GA 30332, USA,
References (100+)
Show source-provided references
1. 10.1002/adv.2004610.1002/adv.20046 ↗
2. Gilmore, G.D. · Modern Plastics · 1950 · 37 · 143
3. Spencer, R.S. · Modern Plastics · 1950 · 28 · 97
4. 10.1063/1.169969910.1063/1.1699699 ↗
5. Gilmore, G.D. · Modern Plastics · 1951 · 28 · 117
6. Ballman, R.L. · Modern Plastics · 1959 · 37 · 105
7. Ballman, R.L. · Modern Plastics · 1960 · 38 · 113
8. Ballman, R.L. · Modern Plastics · 1960 · 38 · 117
9. Jackson, G.B. · Society of Plastics Engineers - Journal · 1960 · 16 · 1147
10. Pearson, J.R.A. · 1966
11. 10.1002/pen.76012040810.1002/pen.760120408 ↗
12. 10.1002/pen.76012040910.1002/pen.760120409 ↗
13. 10.1002/pen.76013020510.1002/pen.760130205 ↗
14. 10.1002/pen.76014031110.1002/pen.760140311 ↗
15. 10.1002/pen.76015080210.1002/pen.760150802 ↗
16. 10.1002/pen.76015080310.1002/pen.760150803 ↗
17. 10.1002/pen.76010040410.1002/pen.760100404 ↗
18. 10.1002/pen.76018041310.1002/pen.760180413 ↗
19. 10.1007/BF0152192810.1007/BF01521928 ↗
20. 10.1002/adv.1986.06006040410.1002/adv.1986.060060404 ↗
21. 10.1002/(SICI)1098-2329(199923)18:3<225::AID-ADV3>3.0.CO;2-310.1002/(SICI)1098-2329(199923)18:3<225::AID-ADV3>3.0.CO;2-3 ↗
22. 10.1017/S002211207200255110.1017/S0022112072002551 ↗
23. 10.1002/pen.76015010810.1002/pen.760150108 ↗
24. 10.1002/pen.76015120810.1002/pen.760151208 ↗
25. 10.1002/aic.69022040510.1002/aic.690220405 ↗
26. 10.1122/1.54937910.1122/1.549379 ↗
27. Broyer, E. · Israel Journal of Technology · 1973 · 11 · 189
28. 10.1002/pen.76020060810.1002/pen.760200608 ↗
29. 10.1002/pen.76014091310.1002/pen.760140913 ↗
30. Hieber, C.A. · Israel Journal of Technology · 1978 · 16 · 248
31. 10.1016/0377-0257(80)85012-910.1016/0377-0257(80)85012-9 ↗
32. Zhou, H.M. · Modern Plastics · 2001 · 78 · 71
33. 10.1002/fld.165004020610.1002/fld.1650040206 ↗
34. 10.1515/polyeng-1986-010410.1515/polyeng-1986-0104 ↗
35. Isayev, A.I. · 1987
36. Bernhardt, E.C. · 1987
37. Kennedy, P. · 1995
38. Tucker, C.L. · 1995
39. 10.1002/pen.76031021010.1002/pen.760310210 ↗
40. 10.1002/pen.76031021110.1002/pen.760310211 ↗
41. 10.1115/1.289977410.1115/1.2899774 ↗
42. 10.1002/pen.76035070710.1002/pen.760350707 ↗
43. 10.1007/BF0036664210.1007/BF00366642 ↗
44. 10.1002/pen.1058510.1002/pen.10585 ↗
45. 10.1115/1.290215510.1115/1.2902155 ↗
46. Kabanemi, K.K. , Vaillancourt, H., Wang, H. and Salloum, G. (1998). Residual Stresses, Shrinkage, and Warpage of Complex Injection Molded Products: Numerical Simulation and Experimental Validation, Polymer Engineering and Science, 38(1): 21-37.10.1002/pen.10162 ↗
47. 10.1115/1.290215610.1115/1.2902156 ↗
48. 10.1002/adv.1995.06014010110.1002/adv.1995.060140101 ↗
49. 10.1115/1.279224510.1115/1.2792245 ↗
50. 10.1016/S0045-7825(98)00131-510.1016/S0045-7825(98)00131-5 ↗
51. 10.1002/pc.1029810.1002/pc.10298 ↗
52. 10.1016/0010-4485(96)00018-810.1016/0010-4485(96)00018-8 ↗
53. 10.1115/1.283120610.1115/1.2831206 ↗
54. 10.1016/j.cad.2004.06.01010.1016/j.cad.2004.06.010 ↗
55. 10.1002/adv.101010.1002/adv.1010 ↗
56. 10.1243/095440501151908810.1243/0954405011519088 ↗
57. 10.1081/PPT-12000206210.1081/PPT-120002062 ↗
58. Yu, H.
59. 10.1081/PPT-20003023010.1081/PPT-200030230 ↗
60. Cao, W.
61. Jaworski, M.J. (2003). Theoretical and Experimental Comparison of Mesh Types Used in Cae Injection Molding Simulation Software , University of Massachusetts Lowell , Lowell, p. 110.
62. Osswald, T.A. · 2002
63. Beaumont, J.P. · 2002
64. http://www.moldflow.com/
65. http://www.simpoe.com/
66. 10.1002/app.1287710.1002/app.12877 ↗
67. 10.1080/0360255060061146110.1080/03602550600611461 ↗
68. Li, D.
69. Jaworski, M.J.
70. 10.1504/IJMPT.2004.00562610.1504/IJMPT.2004.005626 ↗
71. 10.1177/073168440504355810.1177/0731684405043558 ↗
72. 10.1007/s00170-004-2327-910.1007/s00170-004-2327-9 ↗
73. 10.1023/A:100863400446210.1023/A:1008634004462 ↗
74. 10.1002/(SICI)1097-0363(19981215)28:9<1355::AID-FLD770>3.0.CO;2-C10.1002/(SICI)1097-0363(19981215)28:9<1355::AID-FLD770>3.0.CO;2-C ↗
75. Rajupalem, V.
76. Talwar, K.
77. Choi, K.-I.
78. 10.1002/pen.2058510.1002/pen.20585 ↗
79. Kim, S.-W.
80. 10.1177/073168440504776910.1177/0731684405047769 ↗
81. 10.1002/pen.1012010.1002/pen.10120 ↗
82. Haagh, G., Peters, G.W.M., Van de Vosse, F.N. and Meijer, H.E.H. (2001). A 3-D Finite Element Model for Gas-Assisted Injection Molding: Simulations and Experiments, Polymer Engineering and Science, 41(3): 449-465.10.1002/pen.10742 ↗
83. 10.1081/PPT-12002500310.1081/PPT-120025003 ↗
84. Tezduyar, T.E. · Advances in Applied Mechanics · 1992 · 28 · 1
85. 10.1016/0045-7825(92)90146-B10.1016/0045-7825(92)90146-B ↗
86. 10.1061/(ASCE)0733-9429(1995)121:10(710)10.1061/(ASCE)0733-9429(1995)121:10(710) ↗
87. 10.1137/S003614290241177X10.1137/S003614290241177X ↗
88. 10.1016/S0017-9310(97)00374-810.1016/S0017-9310(97)00374-8 ↗
89. 10.1080/106185603100013702610.1080/1061856031000137026 ↗
90. 10.1002/pen.1018310.1002/pen.10183 ↗
91. Yan, B.
92. 10.1002/fld.16610.1002/fld.166 ↗
93. Yang, W.-H.
94. Yang, W.-H.
95. 10.1002/adv.2007610.1002/adv.20076 ↗
96. Chau, S.W. · Journal of Polymer Engineering · 2006 · 26 · 431
97. 10.1016/j.polymer.2005.03.12610.1016/j.polymer.2005.03.126 ↗
98. 10.1002/fld.58210.1002/fld.582 ↗
99. 10.1080/1558372070127164110.1080/15583720701271641 ↗
100. 10.1080/71383622310.1080/713836223 ↗