journal article·2020-08

Effect of stainless-steel wire mesh embedded into fibre-reinforced polymer facings on flexural characteristics of sandwich structures

Çağrı Uzay, Necdet Geren

Publisher page

Abstract

In this study, flexural characteristics of low-density polyvinylchloride foam core sandwich structures consist of carbon fibre/epoxy facings hybridised with very thin stainless-steel wire mesh sheets were investigated. A comprehensive work was conducted considering the following design parameters: core thicknesses, wire mesh sizes, stacking sequences of wire mesh sheets and support span lengths for flexural tests. During the evaluation of flexural characteristics, experimental ASTM standards (C393, D3039, D7249 and D7250) were utilised. In addition, experimental flexural stiffness values were compared to analytically obtained results. By hybridisation of carbon fibre/epoxy facings with wire mesh sheets, significant improvements in flexural characteristics of sandwich structures were obtained. Besides improving bending behaviour and the larger amount of load-carrying capacity even at the same deflection values, the sandwiches with wire mesh sheets also prevented catastrophic sudden failure, which is the common case for carbon/epoxy/polymer foam core sandwiches. Response surface methodology was applied to evaluate the effects of the design variables on the load capacity of the sandwiches, and optimal solutions were revealed. The developed sandwiches can be good candidates in applications where both high stiffness-to-weight ratio and resistance to sudden failure are desired.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Mechanical Behavior of Composites · Mechanical stress and fatigue analysis · Cellular and Composite Structures

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Department of Mechanical Engineering, Çukurova University, Adana, Turkey

References (74)

Show source-provided references
1. Vasiliev VV, Morozov E. Advanced mechanics of composite materials. UK: Elsevier, 2007, p.504.10.1016/B978-008045372-9/50004-X ↗
2. Vinson JR. · 1999
3. 10.1016/j.compstruct.2017.03.05310.1016/j.compstruct.2017.03.053 ↗
4. 10.1007/978-1-4615-6389-110.1007/978-1-4615-6389-1 ↗
5. 10.1146/annurev.matsci.30.1.19110.1146/annurev.matsci.30.1.191 ↗
6. Tortoç A. · 2009
7. 10.1177/073168441142184410.1177/0731684411421844 ↗
8. 10.1080/01694243.2014.96774410.1080/01694243.2014.967744 ↗
9. 10.3139/120.11088310.3139/120.110883 ↗
10. 10.1201/978142000598110.1201/9781420005981 ↗
11. Diab Group · 2012
12. 10.3139/120.11119510.3139/120.111195 ↗
13. 10.1002/(SICI)1527-2648(200004)2:4<219::AID-ADEM219>3.0.CO;2-#10.1002/(SICI)1527-2648(200004)2:4<219::AID-ADEM219>3.0.CO;2-# ↗
14. 10.1016/j.compstruct.2015.07.05610.1016/j.compstruct.2015.07.056 ↗
15. 10.1016/j.compstruct.2006.07.00210.1016/j.compstruct.2006.07.002 ↗
16. Gibson RF. Principles of composite material mechanics. 3rd ed. USA: CRC Press, 2012, p.683.10.1201/b14889 ↗
17. 10.1177/109963621557736710.1177/1099636215577367 ↗
18. 10.1016/j.compstruct.2017.05.00110.1016/j.compstruct.2017.05.001 ↗
19. Black S. Getting to the core of composite laminates, www.compositesworld.com/articles/getting-to-the-core-of-composite-laminates (2003, accessed 2018).
20. Herbeck L, Kleineberg M, Schöppinger C. Foam Cores in RTM Structures, Manufacturing Aid of High-Performance Sandwich? 23rd International SAMPE Europe Conference and Tutorials/JEC, Paris, 2002. Norwich, UK: Page Bros.
21. 10.1016/j.compstruct.2010.06.01810.1016/j.compstruct.2010.06.018 ↗
22. 10.1177/109963620606257010.1177/1099636206062570 ↗
23. 10.1177/002199830404476010.1177/0021998304044760 ↗
24. 10.1007/s11223-007-0022-410.1007/s11223-007-0022-4 ↗
25. 10.1177/109963621561714910.1177/1099636215617149 ↗
26. 10.1016/j.compositesb.2011.11.05110.1016/j.compositesb.2011.11.051 ↗
27. 10.1016/j.compscitech.2012.07.00610.1016/j.compscitech.2012.07.006 ↗
28. 10.1177/002199831455975510.1177/0021998314559755 ↗
29. 10.1016/j.compositesb.2014.04.00310.1016/j.compositesb.2014.04.003 ↗
30. 10.1016/j.ijmecsci.2004.04.00310.1016/j.ijmecsci.2004.04.003 ↗
31. 10.1106/10567890202724710.1106/105678902027247 ↗
32. Arbaoui J · Int J Compos Mater · 2015 · 5 · 1
33. 10.1016/j.compositesb.2015.04.05510.1016/j.compositesb.2015.04.055 ↗
34. 10.1590/1980-5373-mr-2017-110310.1590/1980-5373-mr-2017-1103 ↗
35. 10.1016/j.matdes.2014.04.01410.1016/j.matdes.2014.04.014 ↗
36. 10.1016/j.tws.2018.11.01910.1016/j.tws.2018.11.019 ↗
37. 10.1016/B978-0-08-102264-1.00007-810.1016/B978-0-08-102264-1.00007-8 ↗
38. 10.1016/j.engstruct.2017.02.03310.1016/j.engstruct.2017.02.033 ↗
39. 10.1016/j.conbuildmat.2017.04.11310.1016/j.conbuildmat.2017.04.113 ↗
40. 10.1016/j.compstruct.2017.11.03810.1016/j.compstruct.2017.11.038 ↗
41. 10.1016/j.ijthermalsci.2015.08.00210.1016/j.ijthermalsci.2015.08.002 ↗
42. 10.1016/j.expthermflusci.2017.04.01010.1016/j.expthermflusci.2017.04.010 ↗
43. Sakthivel M · Mater Technol · 2017 · 51 · 455
44. 10.1016/j.matdes.2014.07.03210.1016/j.matdes.2014.07.032 ↗
45. 10.1007/s40034-014-0028-y10.1007/s40034-014-0028-y ↗
46. 10.1007/s11029-017-9696-210.1007/s11029-017-9696-2 ↗
47. Gay D. Composite materials design and applications. 3rd ed. USA: CRC Press, 2015, p.635.
48. Technical Data Sheet (TDS · 2014
49. 10.1177/109963621665326710.1177/1099636216653267 ↗
50. 10.1007/978-1-4020-3225-710.1007/978-1-4020-3225-7 ↗
51. Technical Data Sheet (TDS). Universal structural foam. Switzerland: Airex C70, 3A Composites, 2011.
52. Ces Selector (Software). Granta design, 2016.
53. Technical Data Sheet (TDS). Laminating resin MGSTM L160 and hardener H160 . The Netherlands: Hexion, 2009.
54. McDonough WG · J Astm Int · 2004 · 110.1520/JAI12076 ↗
55. 10.3139/146.10159410.3139/146.101594 ↗
56. Ashby MF. Materials selection in mechanical design. 4th ed. MA, USA: Elsevier, 2011, p.646.10.1016/B978-1-85617-663-7.00005-9 ↗
57. D3039/D3039M-00 A. Standard test method for tensile properties of polymer matrix composite materials. Annual Book of ASTM Standards, 2000.
58. C393/C393M-11 A. Standard test method for core shear properties of sandwich constructions by beam flexure. Annual Book of ASTM Standards, 2011.
59. D7249/D7249M-12 A. Standard test method for facing properties of sandwich constructions by long beam flexure. Annual Book of ASTM Standards, 2012.
60. D7250/D7250M-06 A. Standard test method for facing properties of sandwich constructions by long beam flexure. Annual Book of ASTM Standards, 2006.
61. 10.1177/109963620606333710.1177/1099636206063337 ↗
62. Dutton S, Kelly D, and Baker A. Composite materials for aircraft structures. 2nd ed. USA: American Institute of Aeronautics and Astronautics, 2004, p.597.10.2514/4.861680 ↗
63. 10.1016/j.compositesa.2014.08.02710.1016/j.compositesa.2014.08.027 ↗
64. 10.1177/109963621664989110.1177/1099636216649891 ↗
65. 10.1007/978-90-481-3141-9_910.1007/978-90-481-3141-9_9 ↗
66. 10.1080/10426914.2011.56022710.1080/10426914.2011.560227 ↗
67. 10.1177/002199831881152010.1177/0021998318811520 ↗
68. 10.1016/j.tws.2018.08.00310.1016/j.tws.2018.08.003 ↗
69. 10.1016/j.proeng.2014.12.40110.1016/j.proeng.2014.12.401 ↗
70. 10.1016/j.jobe.2018.07.00910.1016/j.jobe.2018.07.009 ↗
71. 10.1177/073168440809422210.1177/0731684408094222 ↗
72. 10.1016/j.ijmecsci.2018.08.00710.1016/j.ijmecsci.2018.08.007 ↗
73. 10.1016/j.tws.2019.03.05610.1016/j.tws.2019.03.056 ↗
74. 10.1016/j.tws.2019.10649410.1016/j.tws.2019.106494 ↗