journal article·2018-01

Optimization of machining parameters of composites using multi-attribute decision-making techniques: A review

R Arun Ramnath, PR Thyla, N Mahendra Kumar, S Aravind

Publisher page

Abstract

An in-depth literature survey of machining study on fiber-matrix composites is presented in this review paper. The review work mainly focuses on optimization of machining parameters in composite materials with different machining factors. Conventional machining processes such as turning, drilling and milling as well as composite materials which are reinforced with fibers are considered in this study. Machining aspects on various fiber matrix composites has been carried out over a long period of time. In this review work, conflicting conditions of multi-attribute decision-making techniques and machining conditions are focused. The optimization study on machining parameters is done, considering both priori and posteriori approach including advanced optimization techniques. Optimization of machining parameters in fiber reinforced particulate composites has not been explored earlier. The review work on machining study of composites was not attempted earlier and hence this work provides valuable information for subsequent researchers to enhance the scope of research work in particle-reinforced polymer composites.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Advanced machining processes and optimization · Advanced Machining and Optimization Techniques · Manufacturing Process and Optimization

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Department of Mechanical Engineering, PSG College of Technology, Coimbatore, India

References (51)

Show source-provided references
1. 10.1016/j.proeng.2014.12.22810.1016/j.proeng.2014.12.228 ↗
2. Parida A, andRoutara B. Multiresponse optimization of process parameters in turning of GFRP using TOPSIS method. International Scholarly Research Notices 2014, Article ID 905828.10.1155/2014/905828 ↗
3. Asiltürk I, andNes eli S. Multi response optimisation of CNC turning parameters via Taguchi method-based response surface analysis. Measurement 2011; 45: 785–794.10.1016/j.measurement.2011.12.004 ↗
4. Paulo Davin J, andConceicao Antonnio CA. Optimization of cutting conditions in machining of aluminium matrix composite using numerical and experimental models. J Mater Process Technol 2011; 110–119.
5. Ilhan A and · Measurement · 2011 · 44 · 1697
6. 10.1016/j.measurement.2012.11.02610.1016/j.measurement.2012.11.026 ↗
7. Palanikumar K · Mach Sci Technol: Int J · 2007 · 4 · 417
8. Lin CL. Use of the Taguchi method and Grey relational analysis to optimize turning operations with multiple performance characteristics. Mater Manuf Process 2007; 19: 209–220.10.1081/AMP-120029852 ↗
9. 10.1016/j.proeng.2012.06.19710.1016/j.proeng.2012.06.197 ↗
10. 10.1016/j.mspro.2014.07.13410.1016/j.mspro.2014.07.134 ↗
11. 10.1016/j.mspro.2014.07.06810.1016/j.mspro.2014.07.068 ↗
12. 10.1016/j.measurement.2011.07.02310.1016/j.measurement.2011.07.023 ↗
13. 10.1016/S0890-6955(01)00035-910.1016/S0890-6955(01)00035-9 ↗
14. 10.1016/S0924-0136(01)00551-910.1016/S0924-0136(01)00551-9 ↗
15. 10.1016/j.compositesb.2012.01.00710.1016/j.compositesb.2012.01.007 ↗
16. 10.1016/j.compscitech.2006.05.00310.1016/j.compscitech.2006.05.003 ↗
17. 10.1016/j.compositesb.2013.02.03010.1016/j.compositesb.2013.02.030 ↗
18. 10.1016/S0263-8223(03)00137-510.1016/S0263-8223(03)00137-5 ↗
19. 10.1016/j.eswa.2010.02.02310.1016/j.eswa.2010.02.023 ↗
20. Vankanti V · Technol · 2014 · 3 · 35
21. 10.1016/j.measurement.2012.01.00810.1016/j.measurement.2012.01.008 ↗
22. Brinksmeierl (I) E, andJanssen R. Drilling of multi-layer composite materials consisting of carbon fiber reinforced plastics (CFRP), titanium and aluminum alloys.
23. 10.1016/j.jmatprotec.2006.04.12610.1016/j.jmatprotec.2006.04.126 ↗
24. 10.1016/j.compstruct.2005.09.03910.1016/j.compstruct.2005.09.039 ↗
25. 10.1016/j.jmatprotec.2007.10.05010.1016/j.jmatprotec.2007.10.050 ↗
26. 10.1016/j.compositesb.2011.08.05410.1016/j.compositesb.2011.08.054 ↗
27. 10.1016/j.matdes.2012.08.04710.1016/j.matdes.2012.08.047 ↗
28. 10.1016/S0266-3538(03)00253-710.1016/S0266-3538(03)00253-7 ↗
29. Shivapragash B · Int J Modern Eng Res (IJMER) · 2013 · 3 · 765
30. 10.1016/j.proeng.2013.09.13310.1016/j.proeng.2013.09.133 ↗
31. 10.1016/j.jmatprotec.2007.05.00310.1016/j.jmatprotec.2007.05.003 ↗
32. 10.1016/j.jmatprotec.2007.05.04310.1016/j.jmatprotec.2007.05.043 ↗
33. 10.1016/j.measurement.2013.08.04010.1016/j.measurement.2013.08.040 ↗
34. Singh I · Des · 2008 · 29 · 546
35. 10.1080/10426914.2011.58549110.1080/10426914.2011.585491 ↗
36. 10.1080/1042691080271468810.1080/10426910802714688 ↗
37. 10.1080/1042691080271439910.1080/10426910802714399 ↗
38. 10.1080/1042691080238502610.1080/10426910802385026 ↗
39. 10.1080/1042691050041158710.1080/10426910500411587 ↗
40. 10.1016/j.hbrcj.2013.09.00710.1016/j.hbrcj.2013.09.007 ↗
41. Kannan S, Baskar N, andSureshkumar B. Selection of machining parameters in face milling operations for copper work piece material using response surface methodology and genetic algorithm. 5th International & 26th All India Manufacturing Technology, Design and Research Conference (AIMTDR 2014) December 12th-14th, 2014, IIT Guwahati, Assam, India.
42. Gomez-Gonzalez M, andJurado F. Machining parameters selection for milling operations using shuffled frog-leaping algorithm. Int J Emerg Technol Adv Eng 2015; 5: 50–59.
43. Dilli Babu G · J Adv Mech Eng · 2013 · 1 · 1
44. 10.1016/j.measurement.2015.01.02710.1016/j.measurement.2015.01.027 ↗
45. 10.1016/j.ijmachtools.2005.10.00510.1016/j.ijmachtools.2005.10.005 ↗
46. 10.1016/j.jmatprotec.2008.11.02110.1016/j.jmatprotec.2008.11.021 ↗
47. 10.1016/j.proeng.2013.09.20810.1016/j.proeng.2013.09.208 ↗
48. 10.1016/j.proeng.2013.09.14410.1016/j.proeng.2013.09.144 ↗
49. 10.1016/j.proeng.2014.12.24810.1016/j.proeng.2014.12.248 ↗
50. Harii Krishna Rao G, Ansari MNM, andBegum S. Effect of cutting parameters on the surface roughness of MWCNT reinforced epoxy composite using CNC end-milling process. Int J Sci Res (IJSR) 2011; 3: 102–109.
51. Venkata Rao R · Int J Adv Manuf Technol · 2014 · 1 · 35