journal article·2018-08

Machining and its challenges on bio-fibre reinforced plastics: A critical review

R Vinayagamoorthy, T Rajmohan

Publisher page

Abstract

Bio-degradability and sustainability have become major objectives in the field of materials engineering. Due to this, the utilisation of natural reinforcement is gaining immense attention among composite researchers. Among the different composites, polymeric composites are used as structural components. In the present day investigations, bio-elements are majorly utilized as reinforcements due to their properties and bio-degradability. Although polymeric components are manufactured in the shape of the final component, they need secondary processing to make it suitable for assembly. Hence, a review on machining and associated investigations on bio-composites would help the composites industries and upcoming researcher to know the scope of research and for selection of apt machining conditions. This review gives a detailed insight on the various machinability factors and their measurement, influence of machining parameters on the machinability and optimum conditions during machining of bio-composites. In addition, this review also presents about the importance of bio-fibre under various situations of machining and untraditional machining methods used for bio-composites.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Advanced Machining and Optimization Techniques · Natural Fiber Reinforced Composites · Advanced machining processes and optimization

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Department of Mechanical Engineering, Sri Chandrasekharendra Saraswathi Viswa Mahavidyalaya, Enathur, Tamil Nadu, India

References (86)

Show source-provided references
1. 10.1007/s00170-016-9010-910.1007/s00170-016-9010-9 ↗
2. 10.1177/073168441771838510.1177/0731684417718385 ↗
3. 10.1177/073168441349593410.1177/0731684413495934 ↗
4. 10.1177/073168441562659410.1177/0731684415626594 ↗
5. 10.1080/1544047080190148010.1080/15440470801901480 ↗
6. Vinayagamoorthy R, Sivanarasimha S, Vijay P, et al . Experimental studies on water absorption and thermal degradation of natural composites. Int J Appl Eng Res 2015; 10: 663–668.
7. 10.1080/1042691050046475010.1080/10426910500464750 ↗
8. 10.4028/www.scientific.net/AMM.813-814.1410.4028/www.scientific.net/AMM.813-814.14 ↗
9. 10.1080/10426914.2014.94187010.1080/10426914.2014.941870 ↗
10. 10.4028/www.scientific.net/AMM.813-814.10110.4028/www.scientific.net/AMM.813-814.101 ↗
11. 10.1081/AMP-20003448610.1081/AMP-200034486 ↗
12. Vinayagamoorthy R, Madhavan S. Performance studies on shrink-fit radial fan assembly using finite element analysis. Int J Bus Rev Manuf Manage 2011; 1: 5–8.
13. 10.18000/ijodam.7006410.18000/ijodam.70064 ↗
14. Marissa Paglicawan A, Susana Cabillion M, Rosito Cerbito P, et al. Loofah fiber as reinforcement material for composite. Philip J Sci. 2005; 134: 113–120.
15. 10.17485/ijst/2016/v9i37/10197010.17485/ijst/2016/v9i37/101970 ↗
16. 10.1016/j.matdes.2008.05.00310.1016/j.matdes.2008.05.003 ↗
17. 10.1177/073168441771838510.1177/0731684417718385 ↗
18. 10.1016/j.jmatprotec.2004.06.00310.1016/j.jmatprotec.2004.06.003 ↗
19. 10.1115/1.142832910.1115/1.1428329 ↗
20. 10.1080/1042691930893487310.1080/10426919308934873 ↗
21. 10.1177/089270570809350310.1177/0892705708093503 ↗
22. 10.1080/10426914.2011.57786510.1080/10426914.2011.577865 ↗
23. 10.1177/073168440708301210.1177/0731684407083012 ↗
24. Liping L Chunliang Q Feng W et al. Experimental thrust forces and delamination analysis of GFRP laminates using candlestick drills. Mater Manuf Process 2017. DOI: 10.1080/10426914.2017.1376072.10.1080/10426914.2017.1376072 ↗
25. Vinayagamoorthy R, Rajeswari N, Vijayshankar S, et al. Drilling performance investigations on hybrid composites by using D-optimal design. Int Rev Mech Eng 2014; 8: 952–961.
26. 10.1177/073168441348684710.1177/0731684413486847 ↗
27. 10.1177/089270571557509410.1177/0892705715575094 ↗
28. Abilash N, Sivapragash M. Optimizing the delamination failure in bamboo fiber reinforced polyester composite. J King Saud Univ Eng Sci 2013; 28: 92–102.10.1016/j.jksues.2013.09.004 ↗
29. 10.1177/095440541561934310.1177/0954405415619343 ↗
30. 10.1007/s00170-014-6427-x10.1007/s00170-014-6427-x ↗
31. 10.1080/10426914.2016.123281110.1080/10426914.2016.1232811 ↗
32. 10.1007/s13369-015-2005-210.1007/s13369-015-2005-2 ↗
33. 10.1016/j.mspro.2014.07.51310.1016/j.mspro.2014.07.513 ↗
34. 10.1007/s00170-007-0937-810.1007/s00170-007-0937-8 ↗
35. Dilli B, Sivaji Babu K, Uma Maheswar Gowd B. Drilling uni-directional fiber-reinforced plastics manufactured by hand lay-up influence of fibers. Am J Mater Sci Technol 2010; 1: 1–10.
36. 10.4028/www.scientific.net/AMR.984-985.18510.4028/www.scientific.net/AMR.984-985.185 ↗
37. 10.1177/095440541348809410.1177/0954405413488094 ↗
38. 10.1177/073168441039768110.1177/0731684410397681 ↗
39. 10.1007/s12034-011-0359-y10.1007/s12034-011-0359-y ↗
40. 10.1007/s12588-016-9139-210.1007/s12588-016-9139-2 ↗
41. Chandramohan D, Marimuthu K. Thrust force and torque in drilling the natural fiber reinforced polymer composite materials and evaluation of delamination factor for bone graft substitutes – a work of fiction approach. Int J Eng Sci Technol 2010; 2: 6437–6451.
42. 10.1177/146442071558775010.1177/1464420715587750 ↗
43. 10.1080/10426914.2015.105944410.1080/10426914.2015.1059444 ↗
44. Vinayagamoorthy R, Rajeswari N, Balasubramanian K. Optimization studies on thrust force and torque during drilling of natural fiber reinforced sandwich composites. Jordan J Mech Ind Eng 2014; 8: 385–392.
45. 10.1007/s12221-013-1505-510.1007/s12221-013-1505-5 ↗
46. Chandramohan D, Marimuthu K. Drilling of natural fiber particle reinforced polymer composite material. Int J Adv Eng Res Stud 2011; 1: 134–145.
47. 10.1177/073168441349286610.1177/0731684413492866 ↗
48. 10.1088/1757-899X/197/1/01205610.1088/1757-899X/197/1/012056 ↗
49. 10.1016/j.mspro.2014.07.54210.1016/j.mspro.2014.07.542 ↗
50. 10.1016/j.jestch.2016.07.01010.1016/j.jestch.2016.07.010 ↗
51. Lokesh KS, Thomas P, Ramachandra CG. Effect of tool wear & machinability studies on polymer composites; a review. Int J Eng Inf Syst 2017; 1: 71–77.
52. Jayabal S, Natarajan U. Modelling and optimisation of thrust force, torque and tool wear in drilling coir fibre reinforced composites using response surface method. Int J Mach Mach Mater 2011; 9: 142–178.
53. Aravindh S, Umanath K. Delamination in drilling of natural fibre reinforced polymer composites produced by compression moulding. Adv Mater Manuf 2015; 766– 767: 796–800.
54. 10.1007/s00170-010-2605-710.1007/s00170-010-2605-7 ↗
55. Vinayagamoorthy R, Rajeswari N, Karthikeyan S. Investigations of damages during drilling of natural sandwich composites. Adv Mater Manuf 2015; 766– 767: 812–817.
56. Sakthivel M, Vijayakumar S, Prasad NK. Drilling analysis on basalt/sisal reinforced polymer composites using ANOVA and regression model. Adv Math Sci 2015; 9: 3285–3290.
57. Kundan P Vijaykumar C Piyush GP et al. Investigation on drilling of banana fibre reinforced composites. Int Conf Civil Mater Environ Sci 2015. DOI: 10.2991/cmes-15.2015.58.10.2991/cmes-15.2015.58 ↗
58. Syed Azuan SA. Effects of drilling parameters on delamination of coconut meat husk reinforced polyester composites. Adv Environ Biol 2013; 7: 1097–1100.
59. 10.1177/146442071558775010.1177/1464420715587750 ↗
60. 10.11648/j.ajmie.20170202.1510.11648/j.ajmie.20170202.15 ↗
61. 10.4028/www.scientific.net/AMM.787.26510.4028/www.scientific.net/AMM.787.265 ↗
62. 10.17485/ijst/2016/v9i16/8798110.17485/ijst/2016/v9i16/87981 ↗
63. Dilli BG, Sivaji BK, Uma Maheswar GB. Optimization of machining parameters in drilling hemp fiber reinforced composites to maximize the tensile strength using design experiments. Indian J Eng Mater Sci 2013; 20: 385–390.
64. Sunil Kumar M, Amarnath K, Kumar MP. Optimization of process parameters in drilling of short fiber (KENAF) composite. Int J Eng Res 2016; 1535: 161.
65. Naveen PNE Yasaswi M Prasad RV. Experimental investigation of drilling parameters on composite materials. IOSR J Mech Civil Eng 2012; 2: 30–37.10.9790/1684-0233037 ↗
66. Velumani S, Navaneethakrishnan P, Jayabal S, et al. Regression Medelling and optimisation of cutting parameters through Nelder-Mead simplex search and CCFD during drilling of sisal-glass/vinyl ester composites. Int J Mach Mach Mater 2013; 14: 1–22.
67. Dilli BG, Sivaji BK, Uma Maheswar GB. Effect of machining parameters on milled natural fiber reinforced plastic composites. J Adv Mech Eng 2013; 1: 1–12.
68. 10.1016/j.compstruct.2003.09.05410.1016/j.compstruct.2003.09.054 ↗
69. Azmi H Che Hassan Che H Jaharah GA et al. Fundamental Study on delamination in milling kenaf fiber reinforced plastic composite (Unidirectional). In: 11th int manuf sci eng conf 2016 Virginia. DOI: 10.1115/MSEC2016-8531.10.1115/MSEC2016-8531 ↗
70. Mohd Zurayyen AM, Mohamad JJ. Effect of machining parameters on delamination during milled banana fiber reinforced polyester composites. J Eng Sci Res 2017; 1: 9–13.
71. Azmi H, Haron CHC, Ghani JA, et al. Study on machinability effect of surface roughness in milling kenaf fiber reinforced plastic composite (unidirectional) using response surface methodology. ARPN J Eng Appl Sci 2016; 11: 4761–4766.
72. 10.1007/s00170-007-1318-z10.1007/s00170-007-1318-z ↗
73. 10.1016/j.wear.2014.12.03910.1016/j.wear.2014.12.039 ↗
74. Vinayagamoorthy R, Rajeswari N. Analysis of cutting forces during milling of natural fibered composites using fuzzy logic. Int J Compos Mater Manuf 2012; 2: 15–21.
75. Harun A, Haron HC, Ghani JA, et al. Study the effect of milling parameters on surface roughness during milling kenaf fibre reinforced plastic. Adv Envirol Biol 2015; 9: 46–52.
76. 10.1177/152808371456025310.1177/1528083714560253 ↗
77. Dilli BG, Yamini K. Determination of delamination of milled natural fiber reinforced composites. Int J Eng Res Technol 2012; 1: 1–6.
78. De Deus PR, Alves MCDS, Vieira FHA. The quality of MDF workpieces machined in CNC milling machine in cutting speeds, feedrate, and depth of cut. Mech 2015; 50: 2899–2906.
79. 10.4028/www.scientific.net/AMR.941-944.27510.4028/www.scientific.net/AMR.941-944.275 ↗
80. Somsakova Z, Zajac J, Michalik P, et al. Machining of wood plastic composite (pilot experiment). Mater Plast 2012; 49: 55–57.
81. Zuzana H, Jiří Š, Sergej H, et al. Turning of wood plastic composites by water jet and abrasive water jet. Int J Adv Manuf Technol 2016; 84: 1615–1623.
82. Sumit Bhowmik J, Ray A. Prediction and optimization of process parameters of green composites in AWJM process using response surface methodology. Int J Adv Manuf Technol 2016; 8: 1359–1370.
83. 10.1080/10426914.2015.111763310.1080/10426914.2015.1117633 ↗
84. 10.1080/15440478.2016.121276810.1080/15440478.2016.1212768 ↗
85. Jignesh PK, Abdulhafiz Shaikh A. An experimental investigation of AWJ parameters on banana fiber reinforced composite. Int J Eng Res Technol 2014; 3: 608–613.
86. 10.1177/073168441557487010.1177/0731684415574870 ↗