Load sharing ability of the liner in type III composite pressure vessels under internal pressure
Source abstract
Abstract
In this work, the load sharing ability of metallic liners in type III composite overwrapped pressure vessel was investigated by means of accurate numerical models based on finite element method in order to realistically represent the hybrid metal-composite structure. The varying thickness of the composite layers throughout the dome, as well as their angles, were accounted for in the model. The study focused on the influence of material properties and liner-to-composite thickness ratio on the stress and strain distribution between liner and composite at the cylindrical, dome, and polar boss regions. Two novel concepts for the evaluation of the structural response of a composite overwrapped pressure vessel were introduced, namely: (i) the liner stress and strain fractions, and (ii) the correlation with liner-to-composite thickness ratio. The results show complex overall behavior close to the onset of plasticity of the liner, which is critically investigated. A decrease in liner stress fraction was found for higher internal pressure loads since the stress field is increasingly dominated by the composite overwrap. Also, the von Mises equivalent stress along the longitudinal profile of the structure showed a peak at the dome of the liner, whereas for the composite, the peak was at the shoulder region. This was justified considering that, at low pressure, the liner operates elastically in compression-tension mode and the composite in tension-tension mode.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Mechanical Behavior of Composites · Structural Load-Bearing Analysis · Composite Structure Analysis and Optimization
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
PPGE3M, UFRGS – Federal University of Rio Grande do Sul, Brazil
FEUP – Faculty of Engineering of the University of Porto, Portugal
INEGI – Institute of Mechanical Engineering and Industrial Management, Portugal
References (18)
Show source-provided references
1. 10.1177/073168441037633010.1177/0731684410376330 ↗
2. 10.1016/j.ijhydene.2011.11.00110.1016/j.ijhydene.2011.11.001 ↗
3. 10.1177/073168440935116910.1177/0731684409351169 ↗
4. 10.1177/07316840177267928210.1177/073168401772679282 ↗
5. 10.1016/j.compositesa.2013.05.00710.1016/j.compositesa.2013.05.007 ↗
6. 10.1016/S0263-8223(01)00137-410.1016/S0263-8223(01)00137-4 ↗
7. 10.1177/07316844950140120310.1177/073168449501401203 ↗
8. 10.1016/j.engfailanal.2011.10.00310.1016/j.engfailanal.2011.10.003 ↗
9. Faria H, Pires FMA, Miranda HD, et al. Stress-strain constitutive relation in the filament winding manufacturing process. In: 1st International Conference on Composite Materials and Structures , Oran/Algerian, 18–10 November 2009, pp.1–5.
10. Abaqus Library. Abaqus Version 6.13 Documentation, 2013, Dassault Systèmes SIMULIA.
11. Akula VMK and Shubert MK. Nonlinear FEA of composite overwrapped pressure vessels. In: American Society of Composites-28th Technical Conference , State College/Pennsylvania, 9–13 September 2013, pp.1–14.
12. Kaw AK · 2006
13. Peters ST · 2000
14. 10.1002/er.298310.1002/er.2983 ↗
15. 10.1016/S0263-8223(99)00044-610.1016/S0263-8223(99)00044-6 ↗
16. 10.1177/07316840177267833710.1177/073168401772678337 ↗
17. 10.1177/002199830203602087010.1177/0021998302036020870 ↗
18. Thesken JC, et al. A theoretical investigation of composite overwrapped pressure vessel (COPV) mechanics applied to NASA full scale tests . National Aeronautics and Space Administration. Technical report no. NASA/TM—2009-215684.