journal article·2016-04

Effect of fiber parameters on physical, mechanical and water absorption behaviour of coir fiber–epoxy composites

Geetanjali Das, Sandhayarani Biswas

Publisher page

Abstract

This paper studied the effects of fiber length and fiber content on the physical, mechanical and water absorption behavior of coir fiber-reinforced epoxy composites. Twenty different samples were prepared by varying the fiber length (3 mm, 6 mm, 9 mm, 12 mm and 15 mm) and fiber content (5 wt%, 10 wt%, 15 wt% and 20 wt%) using the hand lay-up technique. The density, hardness, tensile strength, tensile modulus, flexural strength, impact energy, compressive strength, compressive modulus, inter-laminar shear strength, fracture toughness and percentage of water absorption of the composites were analyzed. The experimental investigation reveals that the void content and percent of water absorption increases with increase in fiber length and fiber content. The result shows that the density of composites increases with increase in fiber content, while a decrease in density is observed with increase in fiber length. Similarly, the tensile strength, compressive strength, inter-laminar shear strength, flexural strength, and impact strength show their maximum values at 12 mm fiber length and 15 wt% of fiber content. The hardness and tensile modulus, on the other hand, increase with increase in fiber length and fiber content. Morphological analysis is also carried out to observe the fiber pull-out and fracture behavior of the composites using scanning electron microscope.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Natural Fiber Reinforced Composites · Mechanical Behavior of Composites · Tribology and Wear Analysis

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Department of Mechanical Engineering, National Institute of Technology Rourkela, India

References (38)

Show source-provided references
1. 10.1002/app.2745210.1002/app.27452 ↗
2. Natarajan K · Int J Emerg Technol Adv Eng · 2013 · 3 · 583
3. Rijswijk KV, Brouwer WD, Beukers A. Application of natural fiber composites in the development of rural societies, Delft: Delft University of Technology, 2001, pp. 47–47.
4. 10.1016/j.polymertesting.2008.03.00310.1016/j.polymertesting.2008.03.003 ↗
5. 10.1007/s12221-011-0919-110.1007/s12221-011-0919-1 ↗
6. Mahzan S · Int J Integr Eng · 2010 · 2 · 29
7. Slate FO · Eng J Singapore · 1976 · 3 · 51
8. 10.1002/app.1995.07055040510.1002/app.1995.070550405 ↗
9. Bujang IZ, Awang MK and Ismail AE. Study on the dynamic characteristics of coconut fiber reinforced composites. In: Regional conference on engineering mathematics, mechanics, manufacturing & architecture , Putrajaya, Malaysia, 27-28 November 2007, pp.185–202.
10. 10.1016/j.matchar.2008.07.00110.1016/j.matchar.2008.07.001 ↗
11. 10.1590/S1517-7076201000020001710.1590/S1517-70762010000200017 ↗
12. 10.1007/BF0287568610.1007/BF02875686 ↗
13. 10.1007/s10924-010-0273-110.1007/s10924-010-0273-1 ↗
14. 10.1155/2010/52817310.1155/2010/528173 ↗
15. Sumaila M · Asian J Nat Appl Sci · 2013 · 2 · 39
16. 10.1016/S0960-8524(99)00057-710.1016/S0960-8524(99)00057-7 ↗
17. Agarwal BD, Broutman LJ. Analysis and performance of fiber composites, 2nd ed. New York, NY: John wiley & Sons, Inc, 1990, pp. 2–16.
18. 10.1016/S0958-9465(00)00072-X10.1016/S0958-9465(00)00072-X ↗
19. 10.1016/j.matdes.2011.04.00810.1016/j.matdes.2011.04.008 ↗
20. 10.3329/jname.v3i1.92310.3329/jname.v3i1.923 ↗
21. Ojha S · Caspian J Appl Sci Res · 2012 · 1 · 190
22. 10.1177/073168441142681010.1177/0731684411426810 ↗
23. 10.1016/j.matdes.2012.12.00110.1016/j.matdes.2012.12.001 ↗
24. Siddika S · Int J Chem Nucl Mater Metallurg Eng · 2013 · 7 · 41
25. 10.1590/S1516-1439200200040000310.1590/S1516-14392002000400003 ↗
26. Mohammed L · Int J Sci Eng Technol · 2015 · 3 · 322
27. Kumar NR · Int J Eng Res Technol · 2012 · 1 · 110.15623/ijret.2012.0101001 ↗
28. Agarwal G · Int J Eng Res Appl · 2012 · 2 · 1148
29. Owen MM · Adv Polym Sci Technol: Int J · 2015 · 5 · 26
30. Rezaei F · Malaysian J Analytic Sci · 2007 · 11 · 181
31. 10.1016/j.biortech.2009.04.07210.1016/j.biortech.2009.04.072 ↗
32. Prasanna GV · Malaysian Polym J · 2013 · 8 · 38
33. 10.1155/2015/65806410.1155/2015/658064 ↗
34. 10.1002/pat.105610.1002/pat.1056 ↗
35. Agarwal G · Frontier Manuf Eng · 2014 · 2 · 1
36. Pawar MJ, Patnaik A and Nagar R. Experimental investigation and numerical simulation of granite powder filled polymer composites for wind turbine blade: a comparative analysis. Polymer Compos . Epub ahead of print 16 July 2015. DOI 10.1002/pc.23700.10.1002/pc.23700 ↗
37. Kumar A · Int J Adv Res Sci Eng · 2014 · 3 · 1
38. 10.1016/j.conbuildmat.2005.08.02810.1016/j.conbuildmat.2005.08.028 ↗