Extrusion and injection-molding of glass fiber/MAPP/polypropylene: effect of coupling agent on DSC, DMA, and mechanical properties
Source abstract
Abstract
Glass fiber-reinforced PP composites compatibilized with maleic anhydride grafted polypropylene (MAPP) were compounded with a twin-screw extruder and injection molded. The composite specimens were subjected to DSC, DMA, tensile, and flexural property characterizations. DSC results showed that the presence of glass fiber loading and MAPP produced insignificant effect on the melting temperature of the composites. The melting enthalpy was decreased with glass fiber loadings, but no significant change was noted in the crystalline peak temperatures ([Formula: see text]). Incorporation of the compatibilizer led to a reduction in [Formula: see text]. Incorporation of glass fiber reduced the crystalline enthalpy of compatibilized and uncompatibilized systems. DMA results showed that composite properties were affected by the presence of the compatibilizer at low fiber loading (≤14% V f ). Tensile and flexural properties also showed sensible improvement of compatibilized against uncompatibilized composite systems.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Natural Fiber Reinforced Composites · Fiber-reinforced polymer composites · Polymer crystallization and properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Department of Chemistry, Polymer and Composite Materials Research Laboratory, University of Malaya, Kuala Lumpur, Malaysia.
References (33)
Show source-provided references
1. 10.1002/pc.75010050710.1002/pc.750100507 ↗
2. 10.1016/0266-3538(85)90090-910.1016/0266-3538(85)90090-9 ↗
3. Brydson JA · 1999
4. 10.1177/073168440933763210.1177/0731684409337632 ↗
5. 10.1177/073168440809345110.1177/0731684408093451 ↗
6. 10.1177/073168440403286810.1177/0731684404032868 ↗
7. 10.1016/S1359-835X(01)00134-810.1016/S1359-835X(01)00134-8 ↗
8. 10.1002/(SICI)1097-4628(19990228)71:9<1505::AID-APP15>3.0.CO;2-110.1002/(SICI)1097-4628(19990228)71:9<1505::AID-APP15>3.0.CO;2-1 ↗
9. ASTM Standard D638–03. ‘Standard Test Method for Tensile Properties of Plastics’, West Conshohocken, PA: ASTM International, DOI 10.1520/D0638-03, www.astm.org (2003, accessed July 2011).
10. ASTM Standard D790-10. ‘Standard Test Methods for Flexural Properties of Unreinforced and Reinforced Plastics and Electrical Insulating Materials’, West Coshoshocken, PA: ASTM International, DOI 10.1520/D0790-10, www.astm.org (2003, accessed July 2011).
11. 10.1177/073168440809641410.1177/0731684408096414 ↗
12. 10.1016/j.polymer.2004.05.02910.1016/j.polymer.2004.05.029 ↗
13. Sichina WJ. Prediction of end-use characteristics of polyethylene materials using differential scanning calorimetry. USA: Application Briff DSC-11, 1994.
14. 10.1177/073168441039789810.1177/0731684410397898 ↗
15. 10.1177/073168440403396010.1177/0731684404033960 ↗
16. 10.1016/j.polymdegradstab.2005.05.01810.1016/j.polymdegradstab.2005.05.018 ↗
17. 10.3144/expresspolymlett.2008.1110.3144/expresspolymlett.2008.11 ↗
18. 10.1007/BF0197945210.1007/BF01979452 ↗
19. 10.1016/j.compscitech.2005.06.01410.1016/j.compscitech.2005.06.014 ↗
20. 10.1177/089270570201500445710.1177/0892705702015004457 ↗
21. 10.1016/j.biortech.2009.07.06610.1016/j.biortech.2009.07.066 ↗
22. 10.1016/j.compscitech.2009.03.02010.1016/j.compscitech.2009.03.020 ↗
23. 10.1016/S1359-835X(02)00179-310.1016/S1359-835X(02)00179-3 ↗
24. 10.1016/S0014-3057(01)00033-710.1016/S0014-3057(01)00033-7 ↗
25. 10.1016/j.compositesa.2009.04.01610.1016/j.compositesa.2009.04.016 ↗
26. 10.1016/j.compositesa.2004.11.00410.1016/j.compositesa.2004.11.004 ↗
27. 10.1016/S0142-9418(02)00068-510.1016/S0142-9418(02)00068-5 ↗
28. 10.1177/002199830809219410.1177/0021998308092194 ↗
29. 10.1016/j.compositesb.2009.04.00710.1016/j.compositesb.2009.04.007 ↗
30. 10.1016/1359-835X(96)00066-810.1016/1359-835X(96)00066-8 ↗
31. 10.1007/BF0064778310.1007/BF00647783 ↗
32. 10.1016/j.polymertesting.2006.03.00810.1016/j.polymertesting.2006.03.008 ↗
33. 10.1007/BF0061240110.1007/BF00612401 ↗