journal article·2019-03

Assessment of the mechanical properties of aluminium metal matrix composite: A review

Manish Maurya, Sudhir Kumar, Vivek Bajpai

Publisher page

Abstract

In the present scenario, composites are in huge demand in the industries due to their light weight, wear resistance, stiffness and high strength. The functional and structural properties were improved according to the need of industry. Particulate reinforcement is one of the methods to enhance the strength, ductility and toughness of the composites. Stir casting or friction stir processing technique was used to fabricate the metal matrix composite. For technology seekers it is very difficult to select appropriate techniques because there is lack of bench mark standards and industry experiences. The novel contribution of this paper is to provide systematic approaches and methodology which enable academic user as well as industry persons to select appropriate method and parameters for the fabrication of the metal matrix composite. This study guides the new researchers to fabricate and characterize the mechanical properties of aluminium-based composites reinforced with Al 2 O 3 , B 4 C, SiC, TiC, graphite and TiB 2 particles.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Aluminum Alloys Composites Properties · MXene and MAX Phase Materials · Advanced Welding Techniques Analysis

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Department of Mechanical Engineering, Accurate Institute of Management and Technology, Greater Noida, India

Department of Mechanical Engineering, Greater Noida Institute of Management and Technology, Greater Noida, India

Department of Mechanical Engineering, Indian Institute of Technology, Dhanbad, India

References (100+)

Show source-provided references
1. 10.1007/s12666-015-0542-810.1007/s12666-015-0542-8 ↗
2. 10.1016/j.jmrt.2013.03.01510.1016/j.jmrt.2013.03.015 ↗
3. 10.1016/S0921-5093(00)01254-510.1016/S0921-5093(00)01254-5 ↗
4. Sekar K, Allesu K, Joseph MA. Mechanical and wear properties of Al–Al2O3 metal matrix composites fabricated by the combined effect of stir and squeeze casting Method, Trans Indian Inst Met 2015; 68: 115–121.10.1007/s12666-015-0520-1 ↗
5. 10.1016/S0924-0136(03)00815-X10.1016/S0924-0136(03)00815-X ↗
6. 10.1016/S1003-6326(13)62591-110.1016/S1003-6326(13)62591-1 ↗
7. 10.1016/j.jart.2016.05.00910.1016/j.jart.2016.05.009 ↗
8. 10.1016/j.mspro.2014.07.18910.1016/j.mspro.2014.07.189 ↗
9. 10.1016/j.matpr.2017.02.15510.1016/j.matpr.2017.02.155 ↗
10. 10.1016/S0924-0136(99)00118-110.1016/S0924-0136(99)00118-1 ↗
11. 10.1016/j.mspro.2014.07.13310.1016/j.mspro.2014.07.133 ↗
12. 10.1016/j.mspro.2014.07.32410.1016/j.mspro.2014.07.324 ↗
13. Meghdad K, Ali A, Alireza A. Fabrication and characterization of hot rolled and hot extruded boron carbide (B4C) reinforced A356 aluminum alloy matrix composites produced by stir casting method. Trans Indian Inst Met , 2016; 70: 1635–1646.10.1007/s12666-016-0962-0 ↗
14. 10.1016/j.matpr.2017.01.05110.1016/j.matpr.2017.01.051 ↗
15. Shahin S · Nonferrous Met Soc China · 2017
16. 10.1016/j.proeng.2014.11.82110.1016/j.proeng.2014.11.821 ↗
17. 10.1016/j.matdes.2014.01.06810.1016/j.matdes.2014.01.068 ↗
18. 10.1016/j.proeng.2014.12.36810.1016/j.proeng.2014.12.368 ↗
19. 10.1016/j.matpr.2015.07.02610.1016/j.matpr.2015.07.026 ↗
20. 10.1016/S1003-6326(16)64322-410.1016/S1003-6326(16)64322-4 ↗
21. 10.1016/j.proeng.2014.11.00810.1016/j.proeng.2014.11.008 ↗
22. 10.1016/j.mspro.2014.07.17710.1016/j.mspro.2014.07.177 ↗
23. 10.1016/j.matpr.2015.07.28210.1016/j.matpr.2015.07.282 ↗
24. Ritesh R · Arch Civil Mech Eng · 2016 · 16 · 940
25. Rajesh K · Int J Cur Eng Technol · 2014
26. 10.1016/S1003-6326(16)64124-910.1016/S1003-6326(16)64124-9 ↗
27. 10.1016/j.msea.2014.06.02410.1016/j.msea.2014.06.024 ↗
28. 10.1016/j.proeng.2014.12.37810.1016/j.proeng.2014.12.378 ↗
29. Bharath V · Proc Mater · 2014 · 6 · 1658
30. 10.1016/j.matpr.2017.02.15710.1016/j.matpr.2017.02.157 ↗
31. 10.1016/j.mspro.2014.07.53610.1016/j.mspro.2014.07.536 ↗
32. 10.1016/j.matpr.2017.05.05710.1016/j.matpr.2017.05.057 ↗
33. Jebeen Moses J, Joseph Sekhar S. Investigation on the tensile strength and microhardness of AA6061/TiC composites by stir casting. Trans Indian Inst Met 2017; 70: 1035–1046.10.1007/s12666-016-0891-y ↗
34. 10.1016/j.compositesb.2011.08.04910.1016/j.compositesb.2011.08.049 ↗
35. 10.1016/j.proeng.2016.12.13710.1016/j.proeng.2016.12.137 ↗
36. 10.1016/j.proeng.2014.12.37110.1016/j.proeng.2014.12.371 ↗
37. 10.1016/j.matpr.2017.02.19210.1016/j.matpr.2017.02.192 ↗
38. 10.1016/j.measurement.2017.01.04510.1016/j.measurement.2017.01.045 ↗
39. Pardeep S · J Asian Ceramic Soc · 2015
40. 10.1016/S0043-1648(00)00463-410.1016/S0043-1648(00)00463-4 ↗
41. 10.1007/s00170-012-4200-610.1007/s00170-012-4200-6 ↗
42. 10.1016/j.matpr.2015.07.31510.1016/j.matpr.2015.07.315 ↗
43. 10.1016/j.matpr.2017.02.19610.1016/j.matpr.2017.02.196 ↗
44. Dora Siva P, Chintada S. Experimental evaluation onto the damping behavior of Al/SiC/RHA hybrid composites, J Mater Red Technol 2016; 5: 123–130.10.1016/j.jmrt.2015.08.001 ↗
45. 10.1016/j.matpr.2016.01.06310.1016/j.matpr.2016.01.063 ↗
46. Alaneme KK, Michael Oluwatosin B, Adebimpe AA. Microstructure, mechanical and fracture properties of groundnut shell ash and silicon carbide dispersion strengthened aluminium matrix composites. J King Saud Univ-Eng Sci 2018; 30: 96–103.10.1016/j.jksues.2016.01.001 ↗
47. Kenneth K, Alaneme, Olusola Joseph A. Microstructure and mechanical behavior of stir-cast Zn–27Al based composites reinforced with rice husk ash, silicon carbide, and graphite. J King Saud Univ-Eng Sci 2017; 29: 172–177.10.1016/j.jksues.2015.06.004 ↗
48. 10.1016/j.matpr.2015.07.26310.1016/j.matpr.2015.07.263 ↗
49. 10.1016/j.matpr.2015.07.24510.1016/j.matpr.2015.07.245 ↗
50. 10.1016/j.compstruct.2015.07.12210.1016/j.compstruct.2015.07.122 ↗
51. 10.1016/S1003-6326(16)64185-710.1016/S1003-6326(16)64185-7 ↗
52. 10.1016/j.mspro.2014.07.41510.1016/j.mspro.2014.07.415 ↗
53. 10.1016/j.proeng.2017.04.15610.1016/j.proeng.2017.04.156 ↗
54. 10.1016/j.acme.2012.11.00510.1016/j.acme.2012.11.005 ↗
55. 10.1016/j.mspro.2014.07.12410.1016/j.mspro.2014.07.124 ↗
56. 10.1016/j.proeng.2014.12.37610.1016/j.proeng.2014.12.376 ↗
57. Radhika N, Sai Charan K. Experimental analysis on three body abrasive wear behaviour of stir cast Al LM 25/TiC metal matrix composite. Trans Indian Inst Met 2017; 70: 2223–2240.10.1007/s12666-017-1061-6 ↗
58. 10.1504/IJMATEI.2009.02403110.1504/IJMATEI.2009.024031 ↗
59. 10.1007/s00170-010-2529-210.1007/s00170-010-2529-2 ↗
60. 10.1016/j.matpr.2017.02.21510.1016/j.matpr.2017.02.215 ↗
61. 10.1016/S0924-0136(03)00368-610.1016/S0924-0136(03)00368-6 ↗
62. 10.1016/j.protcy.2016.05.04810.1016/j.protcy.2016.05.048 ↗
63. 10.1016/j.matpr.2017.02.14410.1016/j.matpr.2017.02.144 ↗
64. 10.1016/j.matpr.2015.07.30110.1016/j.matpr.2015.07.301 ↗
65. 10.1016/j.mspro.2015.06.04410.1016/j.mspro.2015.06.044 ↗
66. 10.1016/j.aej.2017.03.00910.1016/j.aej.2017.03.009 ↗
67. 10.1016/j.proeng.2014.12.30010.1016/j.proeng.2014.12.300 ↗
68. 10.1016/S1003-6326(14)63027-210.1016/S1003-6326(14)63027-2 ↗
69. 10.1016/S1003-6326(14)63410-510.1016/S1003-6326(14)63410-5 ↗
70. 10.1016/j.triboint.2016.05.01510.1016/j.triboint.2016.05.015 ↗
71. 10.1016/j.acme.2016.08.00410.1016/j.acme.2016.08.004 ↗
72. 10.1016/j.compositesb.2013.05.01210.1016/j.compositesb.2013.05.012 ↗
73. Santanu S, Santanu Kumar K, Debdulal D. Evaluation of abrasive wear resistance of Al2O3/7075 composite by Taguchi experimental design technique. Trans Indian Inst Met 2018; 71: 1847–1858.10.1007/s12666-018-1317-9 ↗
74. Rao VR, Nallu R, Mohammed Moulana Mohiuddin S. Mechanical and tribological properties of AA7075–TiC metal matrix composites under heat treated (T6) and cast conditions. J Mater Res Technol 2016; 5: 377–383.10.1016/j.jmrt.2016.03.011 ↗
75. 10.1016/j.matpr.2017.02.18110.1016/j.matpr.2017.02.181 ↗
76. 10.1016/j.proche.2016.03.01510.1016/j.proche.2016.03.015 ↗
77. Mohammed I · Resource-Eff Technol · 2016
78. Vipin KS, Singh RC, Rajiv C. Effect of flyash particles with aluminium melt on the wear of aluminum metal matrix composites. Eng Sci Technol 2017; 20: 1318–1323.10.1016/j.jestch.2017.08.004 ↗
79. 10.1016/j.matpr.2015.07.30510.1016/j.matpr.2015.07.305 ↗
80. 10.1016/j.matpr.2017.02.17810.1016/j.matpr.2017.02.178 ↗
81. Pardeep S · J Asian Ceramic Soc · 2017
82. 10.1016/j.matdes.2014.02.05310.1016/j.matdes.2014.02.053 ↗
83. 10.1016/j.matpr.2015.07.26210.1016/j.matpr.2015.07.262 ↗
84. 10.1016/j.matpr.2017.02.17710.1016/j.matpr.2017.02.177 ↗
85. 10.1016/j.matpr.2015.07.23410.1016/j.matpr.2015.07.234 ↗
86. 10.1016/j.msea.2015.02.03210.1016/j.msea.2015.02.032 ↗
87. 10.1016/j.matdes.2016.01.04710.1016/j.matdes.2016.01.047 ↗
88. 10.1016/S1003-6326(17)60089-X10.1016/S1003-6326(17)60089-X ↗
89. 10.1016/j.matpr.2015.07.22910.1016/j.matpr.2015.07.229 ↗
90. Ghanbari D, Kasiri Asgarani M, Amini Ket al., Influence of heat treatment on mechanical properties and microstructure of the Al2024/SiC composite produced by multi-pass friction stir processing, Measurement 2017; 104: 151–158.10.1016/j.measurement.2017.03.024 ↗
91. 10.1016/j.jallcom.2017.11.13210.1016/j.jallcom.2017.11.132 ↗
92. 10.1016/j.matdes.2015.06.09010.1016/j.matdes.2015.06.090 ↗
93. 10.1016/j.jmrt.2015.02.00610.1016/j.jmrt.2015.02.006 ↗
94. 10.1016/j.matpr.2015.07.11510.1016/j.matpr.2015.07.115 ↗
95. 10.1016/j.msea.2015.08.02610.1016/j.msea.2015.08.026 ↗
96. 10.1016/j.triboint.2016.04.03310.1016/j.triboint.2016.04.033 ↗
97. 10.1016/j.jmapro.2017.10.00710.1016/j.jmapro.2017.10.007 ↗
98. 10.1016/j.msea.2014.12.07710.1016/j.msea.2014.12.077 ↗
99. Vikram Kumar S, Jain PM, Muhammed S, et al. Microstructure and mechanical and sliding wear behavior of AA5083–B4C/SiC/TiC surface composites fabricated using friction stir processing, Trans Indian Inst Met 2018; 71: 1519–1529.10.1007/s12666-018-1287-y ↗
100. 10.1016/j.matpr.2017.02.30910.1016/j.matpr.2017.02.309 ↗