journal article·2017-07Open access

Impregnated fibre bundle test for natural fibres used in composites

F Bensadoun, I Verpoest, J Baets, J Müssig, N Graupner, P Davies, M Gomina, A Kervoelen, C Baley

Abstract

In this study, the impregnated fibre bundle test, a common method used by carbon and glass fibre manufacturers to determine the properties of fibres used in composites, was adapted for natural fibres and validated by a round robin test on one type of natural fibres, namely flax fibres. Five European laboratories have carried out in parallel the impregnated fibre bundle test, on the same batch of hackled flax (long fibres), to check the applicability and reliability of this modified method on natural fibres. The results were compared to the more traditional single fibre test on elementary fibres. The back-calculated fibre stiffness shows a very low scatter between the five laboratories of less than ±5% (59.8 ± 2.4 GPa, as measured between 0 and 0.1% strain). The fibre ultimate tensile strength of 527 ± 138 MPa has a higher scatter, compared to stiffness values, as this property is highly sensitive to imperfections and flaws.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Natural Fiber Reinforced Composites · Mechanical Engineering and Vibrations Research · Mechanical Behavior of Composites

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Department of Materials Engineering, KU Leuven, Leuven, Belgium

HSB – University of Applied Sciences Bremen, Faculty 5 – Biomimetics/Biological Materials, Bremen, Germany

Centre de Bretagne, Marine Structures Group, IFREMER, Plouzané, France

Laboratoire CRISMAT, UMR 6508 CNRS/ENSICAEN, Université de Caen Basse-Normandie, Caen Cedex, France

Université de Bretagne Sud, Lorient, France

References (41)

Show source-provided references
1. 10.1002/app.2445510.1002/app.24455 ↗
2. 10.1007/BF0054982010.1007/BF00549820 ↗
3. ISO 10618:2004 · 2004
4. Toray Carbon Fibers. Technical data sheet – Torayca T700s.
5. 10.1016/j.compscitech.2015.04.00210.1016/j.compscitech.2015.04.002 ↗
6. 10.1016/j.compositesa.2015.06.01810.1016/j.compositesa.2015.06.018 ↗
7. 10.1016/j.compscitech.2015.01.00210.1016/j.compscitech.2015.01.002 ↗
8. Baley C, Le Duigou A, Bourmaud A, Reinforcement of polymers by flax fibres: Bio-Based Composites for High-Performance Materials: From Strategy to Industrial Application, Boca Raton, USA: CRC press, 2014, pp. 87–87.
9. Depuydt D. Characterization of the impact behaviour of flax fibre composites, Leuven, Belgium: Departement of Material Engineering, KU Leuven, 2013, pp. 129–129.
10. Bos HL · 2004
11. 10.1023/A:101492562125210.1023/A:1014925621252 ↗
12. 10.1016/S1359-835X(02)00040-410.1016/S1359-835X(02)00040-4 ↗
13. Smole MS · Adv Agrophys Res · 2013 · 10 · 52372
14. 10.1016/j.ijadhadh.2011.08.00810.1016/j.ijadhadh.2011.08.008 ↗
15. Perremans D, Hendrickx K, Verpoest I and Van Vuure AW. Investigation of the behaviour of flax fibre composites in humid conditions. 2nd International Conference on Natural Fibers Sao Miguel , Portugal, 27–28 April 2015.
16. 10.1533/9781782421276.1.3510.1533/9781782421276.1.35 ↗
17. Verpoest I · 2012
18. European Linen and Flax, www.mastersoflinen.com/eng/ (accessed 2016).
19. Pariset J. European flax/linen & hemp fibers,advanced & natural material for the composite industry. JEC Composites Magazine, March 2015, Vol 95, pp.34–6. Paris: JEC 2015.
20. ASTM D2343 – 09 · 2009
21. Terre de Lin. Aramis, The new yield champion. http://uk.tdl.isagri-ingenierie.fr/internet-2015/art-of-linen/technical-information/technical-information-1137.aspx (accessed 2016).
22. Saneco. Lin á usage textile en France - Evolution des ventes de semences par variétés. http://www.saneco.com/en/, 2015.
23. 10.1016/j.indcrop.2013.06.01210.1016/j.indcrop.2013.06.012 ↗
24. 10.1016/j.compositesa.2007.03.00610.1016/j.compositesa.2007.03.006 ↗
25. 10.1016/j.compscitech.2008.09.00210.1016/j.compscitech.2008.09.002 ↗
26. 10.1016/j.compositesa.2014.02.00310.1016/j.compositesa.2014.02.003 ↗
27. 10.1016/S1359-835X(00)00085-310.1016/S1359-835X(00)00085-3 ↗
28. Lorenzo L and Hahn HT. Fatigue failure mechanisms in unidirectional composites. Symposium on Composite Materials: Fatigue and Fracture was held in Dallas , Texas, 24–25 October 1984.
29. 10.1016/j.compositesa.2013.03.01810.1016/j.compositesa.2013.03.018 ↗
30. NF T25-501-1: Fibres de renfort - Fibres de lin pour composites plastiques - Partie 1 : terminologie et caractérisation des fibres de lin. AFNOR standards, 2015.
31. NF T25-501-2: Fibres de renfort - Fibres de lin pour composites plastiques - Partie 2 : détermination des propriétés en traction des fibres élémentaires. AFNOR standards, 2015.
32. NF T25-501-3: Fibres de renfort - Fibres de lin pour composites plastiques - Partie 3 : détermination des propriétés en traction des fibres techniques. AFNOR standards, 2015.
33. Trujillo De Los Ríos E · 2014
34. 10.1007/s10853-006-1027-210.1007/s10853-006-1027-2 ↗
35. ISO 14127:2008 · 2011
36. 10.1201/b1488910.1201/b14889 ↗
37. JMP. Oneway Analysis- Compare Means. http://www.jmp.com/support/help/Compare_Means.shtml, 2012.
38. 10.1016/j.ijfatigue.2009.02.02410.1016/j.ijfatigue.2009.02.024 ↗
39. Célino A · Frontiers in chemistry · 2013 · 43 · 1
40. 10.1016/0015-0568(82)90059-810.1016/0015-0568(82)90059-8 ↗
41. Straumit, Ilya, S. Lomov, Farida Bensadoun, and Martine Wevers. Automatic transformation of 3D micro-CT images into finite element models with anisotropic local properties. In: ECCM 16: European conference on composite materials . 22–26 June 2014.