Evaluation and prediction of temperature-dependent tensile strength of unidirectional carbon fiber-reinforced polymer composites
Source abstract
Abstract
To predict temperature-dependent tensile strength of unidirectional CFRP composites, numerical analysis and model simulation were conducted in terms of experimental results. The effect of elevated temperatures on tensile strength of CFRP sheets was evaluated between 20 ° C and 120 ° C, and the storage moduli of two types of epoxy resins, with glass transition temperatures (T g ) of 42 ° C and 45 ° C, were tested by DMA. The tensile experiments of CFRP sheets show that the tensile strength exhibits stable behavior at the low-temperature range (below glass transition temperature), but drops rapidly during the glass transition region, and then reaches a plateau. Analysis results indicate that the degradation of tensile strength is mainly due to matrix softening and loss of fiber—matrix adhesion, based on which a semi-empirical model is proposed to precisely describe tensile strength reduction as the temperature increases. The parameters of the model consist of the glass transition temperature of polymer matrix, the polymer glass transition region, and the residual strength after the glass transition region. Model prediction of tensile strength vs. temperature shows good agreement with the experimental results.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Fiber-reinforced polymer composites · Mechanical Behavior of Composites · Smart Materials for Construction
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Department of Urban and Civil Engineering, Ibaraki University, Japan, School of Sciences, Xi'an University of Technology, China
International Institute for Urban Systems Engineering, Southeast University, China
Department of Urban and Civil Engineering, Ibaraki University, Japan, , International Institute for Urban Systems Engineering, Southeast University, China
References (26)
Show source-provided references
1. 10.1351/pac19886003028710.1351/pac198860030287 ↗
2. 10.1016/j.carbon.2003.11.02010.1016/j.carbon.2003.11.020 ↗
3. Hu XQ · Hi-Tech Fiber Appl · 2005 · 30 · 7
4. Karbhari VM · 1998
5. 10.1016/S0950-0618(03)00040-010.1016/S0950-0618(03)00040-0 ↗
6. 10.1016/j.compstruct.2010.01.02310.1016/j.compstruct.2010.01.023 ↗
7. 2002
8. Foster SK
9. 10.1016/j.compscitech.2006.01.02010.1016/j.compscitech.2006.01.020 ↗
10. 10.1177/002199830505554310.1177/0021998305055543 ↗
11. 10.1016/j.compscitech.2006.07.03810.1016/j.compscitech.2006.07.038 ↗
12. 10.1016/j.compositesa.2007.04.01310.1016/j.compositesa.2007.04.013 ↗
13. 10.1177/002199830707546110.1177/0021998307075461 ↗
14. 10.1177/002199830934464210.1177/0021998309344642 ↗
15. 10.6089/jscm.32.13710.6089/jscm.32.137 ↗
16. 10.1177/002199830809922410.1177/0021998308099224 ↗
17. Nippon Steel Composite · 2011
18. Jsce. Test method for tensile properties of continuous fiber sheets (JSCE-E 541-2000). Recommendations for Upgrading of Concrete Structures with Use of Continuous Fiber Sheets. Japan, 2001, pp.91-105.
19. Guo ML · 2002
20. Mouritz AP · 2006
21. 10.1007/s00339005115310.1007/s003390051153 ↗
22. 10.1351/pac19865803045510.1351/pac198658030455 ↗
23. Maeda Y. · 2007
24. Wang ZM · Composite materials and structural mechanics, design, application and evaluation · 1998 · 2
25. 10.1016/0266-3538(93)90129-510.1016/0266-3538(93)90129-5 ↗
26. 10.1007/978-94-015-9183-610.1007/978-94-015-9183-6 ↗