Influence of flame retardant magnesium hydroxide on the mechanical properties of high density polyethylene composites
Source abstract
Abstract
The effects of incorporating magnesium hydroxide as a flame retardant on the mechanical properties of high density polyethylene which include tensile, flexural, compressive, shear and fracture toughness behaviours were investigated. The weight fraction of the filler material ranges from 10 to 50 wt %. The effects of filler weight percent and strain rate during tensile testing by means of a universal testing machine were both studied to identify the behaviour of the produced composites. It was observed that the flexural modulus and Young's modulus increased steadily while the tensile fracture strength and the tensile yield strength were inversely proportional to the weight fraction of magnesium hydroxide. The tensile yield strength showed a steady decrease with the loading of filler material until 10% then it showed a plateau until 50%. The tensile elongation at break decreased sharply between zero and 10% weight fraction, followed by a slight decrease until 50% weight fraction. The flexural strength peaked with the increase of magnesium hydroxide weight fraction. The strain rate showed a dramatic effect on the tensile properties of the samples. The compressive strength and shear strength of specimens were directly proportional to Mg(OH) 2 until 40% and 30%, respectively. The novelty in optimizing between filler content and testing configurations reveal wide range of applications.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Flame retardant materials and properties · Natural Fiber Reinforced Composites · Polymer Nanocomposites and Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Department of Production Engineering, Faculty of Engineering, Alexandria University, Alexandria, Egypt
Department of Chemistry and Physics, Faculty of Science, Alexandria University, Alexandria, Egypt
References (39)
Show source-provided references
1. Dittenber BD · Compos Part A: Appl Sci Manuf · 2012 · 43 · 1419–142910.1016/j.compositesa.2011.11.019 ↗
2. Oprisan G · Buletinul Institutului Politehnic Diniasi · 2010 · 3 · LVI
3. Karbhari VM. Non-destructive evaluation (NDE) of polymer matrix composites , 1st ed. Woodhead Publishing, 2013. ISBN: 9780857093554.10.1533/9780857093554 ↗
4. Holbery J · JOM · 2006 · 58 · 80–8610.1007/s11837-006-0234-2 ↗
5. World Fire Statistics, Information Bulletin of the World Fire Statistics Centre, the Geneva Association, World Fire Statistics No 28, October 2012.
6. Sarkos CP. The effect of cabin materials on aircraft post-crash fire survivability. In: Technical papers of the annual technical conference , USA, vol. 54, 1996, p.54.
7. Rallini M · Polymer · 2013 · 5154–5165
8. Bureau of Aircraft Accidents Archives, http://www.baaa-acro.com (2013, accessed 10 September 2013).
9. Lyu W · J Appl Polym Sci · 2016 · 133 · 43538–43546
10. 10.1002/app.2913110.1002/app.29131 ↗
11. Draft, MIL-STD-X108 (SH). Fire and toxicity test methods and qualification procedure for composite material systems used in Hull. Machinery and Structural Application Inside Naval Submarines, NAVSEA, Non-metallic Materials and Packaging Branch, Project 19 GP-N007, July 1989.
12. Draft, Military Standard, Fire and Toxicity Performance Requirements for Composite Materials Used in Hull Machinery Applications inside Naval Submarines, NRL, Washington DC, February 1987.
13. Kim S · J Polym Sci B: Polym Phys · 2003 · 41 · 93610.1002/polb.10453 ↗
14. Levesque JL and Hastbacka MA. Magnesium oxide as a thickener for unsaturated polyester-smc demands SPC. In: From RETEC additive approaches to polymer modification conference papers , USA, vol. 9, 1989, pp.R89–R190.
15. Ren F · J Appl Polym Sci · 2013 · 129 · 226110.1002/app.38960 ↗
16. Wu Z · Polymer · 2013 · 3334–3340
17. Jang J · Polym Test · 2000 · 19 · 26910.1016/S0142-9418(98)00088-9 ↗
18. Sun S · J Appl Polym Sci · 2010 · 118 · 61110.1002/app.32465 ↗
19. Zhang W · Compos Part B: Eng · 2013 · 51 · 27610.1016/j.compositesb.2013.03.014 ↗
20. Hornsby PR · Polym Degrad Stab · 1990 · 30 · 7310.1016/0141-3910(90)90118-Q ↗
21. Ziegan G and Höngesberg H. Effective flame retardant for rubber and thermoplastics. In: From 5th conference flame retardants ‘92 , London, UK, pp.120–132.
22. Jeencham R · Compos Part B: Eng · 2014 · 56 · 24910.1016/j.compositesb.2013.08.012 ↗
23. Hornsby PR · Fire Mater · 1994 · 18 · 26910.1002/fam.810180502 ↗
24. Sangcheol K · J Polym Sci · 2003 · 41 · 93610.1002/polb.10453 ↗
25. Titelman GI · Polym Degrad Stab · 2002 · 77 · 34510.1016/S0141-3910(02)00064-2 ↗
26. Hong CH · J Appl Polym Sci · 2005 · 97 · 231110.1002/app.21776 ↗
27. Sain M · Polym Degrad Stab · 2004 · 83 · 36310.1016/S0141-3910(03)00280-5 ↗
28. Guan F-L · Compos Part B: Eng · 2016 · 98 · 13410.1016/j.compositesb.2016.04.062 ↗
29. Carpentier F · Polym Degrad Stab · 2000 · 69 · 8310.1016/S0141-3910(00)00044-6 ↗
30. Maira B · Macromol Mater Eng · 2015 · 300 · 67910.1002/mame.201500012 ↗
31. Tasdemir M · Polym-Plast Technol Eng · 2011 · 50 · 106410.1080/03602559.2011.557919 ↗
32. ASTM D 638-2a · 2003
33. ASTM D 695. Standard test method for compressive properties of rigid plastics . West Conshohocken, PA: American Society for Testing and Materials (ASTM) International.
34. ASTM D 3846. Standard test method for in-plane shear strength of reinforced plastics . West Conshohocken, PA: American Society for Testing and Materials (ASTM) International.
35. ASTM D 5045. Standard test methods for plane-strain fracture toughness and strain energy release rate of plastic materials . West Conshohocken, PA: American Society for Testing and Materials (ASTM) International.
36. Ismail H · Polym Test · 2002 · 21 · 13910.1016/S0142-9418(01)00060-5 ↗
37. Premalal HGB · Polym Test · 2002 · 21 · 83310.1016/S0142-9418(02)00018-1 ↗
38. Rahman MR · BioResources · 2010 · 5 · 85410.15376/biores.5.2.854-869 ↗
39. Yang HS · Compos Struct · 2004 · 63 · 30510.1016/S0263-8223(03)00179-X ↗