journal article·2013-03

Natural fiber reinforced poly(vinyl chloride) composites: A review

HPS Abdul Khalil, MA Tehrani, Y Davoudpour, AH Bhat, M Jawaid, A Hassan

Publisher page

Abstract

Materials from renewable resources – also called biomaterials or ‘green’ materials – are presently gaining in importance worldwide. In these times of continuous increases in the price of crude oil and discussion of carbon dioxide (CO 2 ) emissions, conventional plastics have reached a price level and a questionable image which promotes the search of alternatives. Natural fibers are a renewable natural resource and are biodegradable, which is an important characteristic for components that must be disposed of at the end of their useful life. They are recyclable and can be easily converted into thermal energy through combustion without leaving residue. In this study, we will discuss the natural fiber reinforced polyvinyl chloride composites, reinforcing effect, plasticization effect along with modification by coupling agents, properties, and applications based on composite materials. Also, the polyvinyl chloride-based composite materials with specific emphasis on effect of coupling agent, foamed polyvinyl chloride composites, and the effect of natural fiber reinforcement on its material properties will be reviewed. One of the best alternatives is natural fiber reinforced plastics composites. These are composites that are typically filled or reinforced with plant fibers, as well as plastics such as polyvinyl chloride or recently, even bioplastics.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Natural Fiber Reinforced Composites · Polymer Foaming and Composites · Polymer Science and PVC

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

School of Industrial Technology, Universiti Sains Malaysia, Penang, Malaysia

Department of Fundamental and Applied Sciences, Universiti Teknologi Petronas Malaysia, Bandar Seri Iskandar, Perak Darul Ridzuan, Malaysia

Laboratory of Biocomposite Technology, Institute of Tropical Forestry and Forest Products (INTROP), Universiti Putra Malaysia, Selangor, Malaysia

Department of Polymer Engineering, Faculty of Chemical Engineering, Universiti Teknologi Malaysia, Skudai, Malaysia

References (100+)

Show source-provided references
1. Clemons C. Wood-plastic composites in the United States – The interfacing of two industries. Forest Products Journal 2002; 52: 10–18.
2. Clemons CM and RE Ibach. Effects of processing method and moisture history on laboratory fungal resistance of wood-HDPE composites. Forest Products Journal 2004; 4(54): 50–57.
3. Selke SE and Wichman I. Wood fiber/polyolefin composites. Composites: Part A 2004; 35: 321–326.10.1016/j.compositesa.2003.09.010 ↗
4. Maldas D and Kokta BV. Improving adhesion of wood fiber with polystyrene by the chemical treatment of fiber with a coupling agent and the influence on the mechanical properties of composites. J Adhes Sci Technol 1989; 3: 529.10.1163/156856189X00380 ↗
5. Jiang H and Kamdem DP. Development of poly(vinyl chloride)/wood composites. A literature review. Journal of Vinyl and Additive Technology 2004; 10(2): 59–69.10.1002/vnl.20009 ↗
6. 10.1007/s10924-008-0113-810.1007/s10924-008-0113-8 ↗
7. 10.1016/j.compositesa.2006.01.02310.1016/j.compositesa.2006.01.023 ↗
8. 10.1002/pat.126210.1002/pat.1262 ↗
9. 10.1002/vnl.2005610.1002/vnl.20056 ↗
10. 10.1002/vnl.1024410.1002/vnl.10244 ↗
11. Schwarz MC Barlow JW and Paul DR. Mechanical properties of DPE/(PEC/PS)/SEBS blends. Journal of Applied Polymer Science 1988; 35(8): 2053–2067.10.1002/app.1988.070350806 ↗
12. Hong BK and Jo WH. Effects of molecular weight of SEBS triblock copolymer on the morphology impact strength and rheological property of syndiotactic polystyrene/ethylene -propylene rubber blends. Polymer 2000; 41: 2069.10.1016/S0032-3861(99)00372-9 ↗
13. Sombatsompop N and Chaochanchaikul K. Effect of moisture content on mechanical properties thermal and structural stability and extrudate texture of poly(vinyl chloride)/wood sawdust composites. Polym Int 2004; 53: 1210.10.1002/pi.1535 ↗
14. Wu Y and Dollimore D. Kinetic studies of thermal degradation of natural cellulosic materials. Thermochimica Acta 1998; 324: 49.10.1016/S0040-6031(98)00522-X ↗
15. 10.1002/app.2064410.1002/app.20644 ↗
16. 10.1002/pc.1030710.1002/pc.10307 ↗
17. 10.1002/pi.138610.1002/pi.1386 ↗
18. Jiang H and Kamdem DP. Effects of copper amine treatment on mechanical properties of PVC/wood-flour composites. J Vinyl Addit Technol 2004a; 10: 70.10.1002/vnl.20010 ↗
19. Bledzki. AK and Gassan J. Composites reinforced with cellulose based fibres. Prog Polym Sci 1999; 24: 221–274.
20. Aji IS, Sapuan SM, Zainudin ES, . Kenaf fibres as reinforcement for polymeric composites: a review. Int J Mech Mater Eng 2009; 4: 239–248.
21. 10.3390/polym204072810.3390/polym2040728 ↗
22. 10.1002/mame.20100009510.1002/mame.201000095 ↗
23. Dufresne A. Polysaccharide nanocrystals reinforced nanocomposites. Can J Chem 2008; 86: 484–494.10.1139/v07-152 ↗
24. John MJ and Anandjiwala RD. Recent developments in chemical modification and characterization of natural fiber-reinforced composites. Polym Compos 2008; 29(2): 187–207.10.1002/pc.20461 ↗
25. 10.1002/pen.1084610.1002/pen.10846 ↗
26. Garkhail SK Heijenrath RWH and Peijs T. Mechanical properties of natural-fibre-mat-reinforced thermoplastics based on flax fibres and polypropylene. Applied Composite Materials 2000; 7(5–6): 351–372.10.1023/A:1026590124038 ↗
27. Biagiotti J, Puglia D, Kenny JM. A review on natural fibre-based composites– part I. Struct Process Prop Vegetable Fibres 2004; 1: 37–68.
28. 10.1002/masy.20090010410.1002/masy.200900104 ↗
29. 10.1002/pola.1090610.1002/pola.10906 ↗
30. Wirawan R, Zainudin ES, Sapuan SM. Mechanical properties of natural fibre reinforced PVC composites: a review. Sains Malaysiana 2009; 38(4): 531–535.
31. 10.1007/s10924-006-0042-310.1007/s10924-006-0042-3 ↗
32. 10.1002/pen.2132810.1002/pen.21328 ↗
33. 10.1002/(SICI)1098-2329(199924)18:4<351::AID-ADV6>3.0.CO;2-X10.1002/(SICI)1098-2329(199924)18:4<351::AID-ADV6>3.0.CO;2-X ↗
34. Mohd Edeerozey AM Akil HM Azhar AB and Zainal Ariffin MI. Chemical modification of kenaf fibers. Journal of Materials Letters 2007; 61: 2023–2025.10.1016/j.matlet.2006.08.006 ↗
35. Joseph PV Marcelo SR Mattoso LHC et al. Environmental effects on the degradation behavior of sisal fiber reinforced polypropylene composites. Journal of Composite Science and Technology 2003; 62: 1357–1372.10.1016/S0266-3538(02)00080-5 ↗
36. Ray D and Sarkar BK. Characterization of alkali-treated jute fibres for physical and mechanical properties. Journal of Applied Polymer Science 2001; 80: 1013–1020.10.1002/app.1184 ↗
37. 10.1016/j.jmatprotec.2006.10.01610.1016/j.jmatprotec.2006.10.016 ↗
38. Kohler and Wedler 1995.
39. Thomas S, Pothan LA. Natural fibre reinforced polymer composites from macro to nanoscale , Philadelphia, PA, USA: Old City Publishing, 2009.
40. Hornsby PR Hinrichsen E and Triverdi K. Preparation and properties of polypropylene composites reinforced with wheat and flax straw fibers. Part II Analysis of composite microstructure and mechanical properties. J Mater Sci 1997; 32: 1009–1015.10.1023/A:1018578322498 ↗
41. Bogoeva-Gaceva G Avella M Malinconico M et al. Natural fibre eco-composites. Polymer Composites 2007; 27: 98–107.10.1002/pc.20270 ↗
42. Mieck KP Nechwatal A and Knobelsdorf C. Anwendungsmöglichkeiten von Naturfaserstoffen bei Verbundmaterial. Meiland Text-ilberichte 1994; 11: 892–898.
43. Oksman K. High quality flax fibre composites manufactured by the resin transfer moulding process. Journal of Reinforced Plastics and Composites 2007; 20(7): 621–627.10.1106/CA5A-6FAX-VJRB-80P0 ↗
44. Oksman K Wallström L Berglund LA and Dias Toledo Filho R. Morphology and mechanical properties of unidirectional sisal-epoxy composites. Journal of Applied Polymer Science 2002; 84(13): 2358--2365.10.1002/app.10475 ↗
45. Kim HS Yang HS Kim HJ et al. Thermal properties of agroflour-filled biodegradable polymer bio-composites. Journal of Thermal Analysis and Calorimetry 2005; 81(2): 299–306.10.1007/s10973-005-0782-7 ↗
46. 10.1016/j.compositesa.2010.03.00510.1016/j.compositesa.2010.03.005 ↗
47. 10.1016/j.compositesa.2009.02.02210.1016/j.compositesa.2009.02.022 ↗
48. Matuana LM. Mechanisms of adhesion in wood fibers filled PVC matrix. Proceedings of the Vinyltech 2004, processing the perfect polymer-PVC, sponsored by the vinyl division and palisades section of the Society of Plastics Engineers. 11–13 October 2004. Iselin, NJ. Newtown, CT: Society of Plastics Engineers.
49. 10.1002/app.2142210.1002/app.21422 ↗
50. 10.1080/03602559.2010.51233610.1080/03602559.2010.512336 ↗
51. 10.1080/0360255080236730010.1080/03602550802367300 ↗
52. Ahmad M. Mechanical properties of rice husk impact modified unplastisized poly vinyl chloride composite. Doctoral Thesis Faculty of Chemical and Natural Resources Engineering Universiti Teknologi Malaysia 2006 pp. 95–97.
53. Hassan A, Sivaneswaran K. Processability study of abs impact modified PVC-U composites – effect of rice husk ash (Rha) fillers and coupling agents. J Tekno 2005; 42: 67–74.
54. Li H and Huneault MA. Crystallization in PLA/thermoplastic starch blends. Int Polym Proc 2008; 23: 412--418.10.3139/217.2185 ↗
55. Liu T, Hong F-H, . Effect of surface treatment of wood-flour on properties of PVC/wood-flour composite. Chinese J 2005; 1.
56. Matuana LM. Influence of interfacial interactions on the properties of PVC/cellulosic fiber corn posites. SPEANTEC Tech. Papers 1998; 56: 3313–3318.
57. 10.1002/vnl.73012030610.1002/vnl.730120306 ↗
58. 10.1016/j.compositesa.2011.09.02510.1016/j.compositesa.2011.09.025 ↗
59. 10.1002/vnl.2026410.1002/vnl.20264 ↗
60. 10.1002/vnl.2001010.1002/vnl.20010 ↗
61. 10.1016/j.apsusc.2010.02.04710.1016/j.apsusc.2010.02.047 ↗
62. 10.1016/j.polymdegradstab.2011.10.02110.1016/j.polymdegradstab.2011.10.021 ↗
63. Abdrahman MF, Zainudin ES. Properties of kenaf filled unplasticized polyvinyl chloride composites. Compos Sci Technol 2011; 471–472: 507–512.
64. 10.1080/0360255900804983610.1080/03602559008049836 ↗
65. Wirawan R, Sapuan SM, Yunus R, . Properties of sugarcane bagasse/poly (vinyl chloride) composites after various treatments. J Compos Mater 2010; 471–472: 167–172.
66. Saini G Narula AK Choudhary V et al. Effect of particle size and alkali treatment of sugarcane bagasse on thermal mechanical and morphological properties of PVC-bagasse composites. J Reinf Plast Compos. Epub ahead of print 13 February 2009. DOI: 10.1177/0731684408100693.10.1177/0731684408100693 ↗
67. 10.1002/app.2775910.1002/app.27759 ↗
68. 10.1016/j.eurpolymj.2009.09.02010.1016/j.eurpolymj.2009.09.020 ↗
69. 10.1002/app.3041910.1002/app.30419 ↗
70. 10.1163/092764409X1247746166198710.1163/092764409X12477461661987 ↗
71. Chen G-H, Chen F-L, Lei C-H, . Application of POE-g-MAH on the properties of wood/PVC composite. Plastics 2007; 1.
72. 10.1016/j.compscitech.2010.01.02310.1016/j.compscitech.2010.01.023 ↗
73. 10.1002/pat.51410.1002/pat.514 ↗
74. 10.1002/pen.1024210.1002/pen.10242 ↗
75. Sombatsompop N Prapruit W Chaochanchaikul K et al. Effects of cross section design and testing conditions on the flexural properties of wood/PVC composite beams. Journal of Vinyl and Additive Technology 2009; 16(1): 33–41.10.1002/vnl.20202 ↗
76. Prachayawarakorn J Khunsumled S Thongpin C et al. Effects of silane and MAPE coupling agents on the properties and interfacial adhesion of wood-filled PVC/LDPE blend. Journal of Applied Polymer Science 2008; 108(6): 3523–3530.10.1002/app.27973 ↗
77. Kokta BV Maldas D Daneault C and Beland P. Composites of poly(vinyl chloride) and wood fibers. Part II. Effect of chemical treatment. Polym Compos 1990; 11(2): 84–89.10.1002/pc.750110203 ↗
78. 10.1016/0960-8524(91)90122-Z10.1016/0960-8524(91)90122-Z ↗
79. Huilin Y, Jun L, Peilan M. Influence of the interface modification of wood flour on the properties of PVC/wood flour foamed composites. Eng Plast Appl 2003; 8.
80. Lu JZ and Wu Q. Surface and interfacial characterization of wood-PVC composite: imaging morphology and wetting behavior. Wood and Fiber Science 2007; 37(1): 95–111.
81. 10.1002/pen.1175810.1002/pen.11758 ↗
82. 10.1016/S0032-3861(98)00748-410.1016/S0032-3861(98)00748-4 ↗
83. 10.1016/S0014-3057(01)00168-910.1016/S0014-3057(01)00168-9 ↗
84. Djidjelli H Martinez-Vega JJ Farenc J and Benachour D. Effect of wood flour content on the thermal mechanical and dielectric properties of poly(vinyl chloride). Macromolecular Materials and Engineering 2002; 287(9): 611–618.10.1002/1439-2054(20020901)287:9<611::AID-MAME611>3.0.CO;2-L ↗
85. Semsarzadeh MA, Mehrabzadeh M, Arabshahi SS. Mechanical and thermal properties of the plasticized PVC-ESBO. Iran Polym J 2005; 14: 769–773.
86. Georgopoulos ST Tarantili PA Avgerinos E et al. Thermoplastic polymers reinforced with fibrous agricultural residues. Poly Degrad Stability 2005; 90(2): 303–312.10.1016/j.polymdegradstab.2005.02.020 ↗
87. 10.3144/expresspolymlett.2007.11710.3144/expresspolymlett.2007.117 ↗
88. 10.1002/pc.2025610.1002/pc.20256 ↗
89. 10.1177/073168440707947910.1177/0731684407079479 ↗
90. 10.1177/089270570809185810.1177/0892705708091858 ↗
91. 10.15376/biores.4.4.1285-130410.15376/biores.4.4.1285-1304 ↗
92. 10.1002/app.3188210.1002/app.31882 ↗
93. Charles et al. 2005.
94. 10.1002/vnl.1020410.1002/vnl.10204 ↗
95. 10.1002/app.3045210.1002/app.30452 ↗
96. 10.1002/1439-2054(20020901)287:9<611::AID-MAME611>3.0.CO;2-L10.1002/1439-2054(20020901)287:9<611::AID-MAME611>3.0.CO;2-L ↗
97. 10.1016/j.polymdegradstab.2005.02.02010.1016/j.polymdegradstab.2005.02.020 ↗
98. Bodîrlău R Teacă CA and Spiridon I. Preparation and characterization of composites comprising modified hardwood and wood polymers/poly (vinyl chloride). Bio Resources 2009; 4: 1285–1304.10.15376/biores.4.4.1285-1304 ↗
99. Leong YW Abu Bakar MB Mohd Ishak ZA and Ariffin A. Effects of filler treatments on the mechanical flow thermal and morphological properties of talc and calcium carbonate filled polypropylene hybrid composites. Journal of Applied Polymer Science 2005; 413–426.10.1002/app.21507 ↗
100. Abu Bakar MB Leong YW Ariffin A et al. Mechanical flow and morphological properties of talc- and kaolin-filled polypropylene hybrid composites. Journal of Applied Polymer 2007; 434–441.10.1002/app.25535 ↗