journal article·2010-04

Comparative Studies of Mechanical and Interfacial Properties Between Jute and E-glass Fiber-reinforced Polypropylene Composites

Ruhul A. Khan, Mubarak A. Khan, Haydar U. Zaman, Shamim Pervin, Nuruzzaman Khan, Sabrina Sultana, M. Saha, A.I. Mustafa

Publisher page

Abstract

Jute fiber (hessian cloth)-reinforced polypropylene matrix composites (50 wt% fiber) were fabricated by compression molding. Tensile strength, tensile modulus, bending strength, bending modulus, and impact strength of the composites were found to be 48 MPa, 2.5 GPa, 56 MPa, 4.5 GPa, and 18 kJ/m 2 , respectively. Then E-glass fiber (woven)-reinforced polypropylene-based composites (50 wt% fiber) were fabricated and the mechanical properties were compared with those of the jute-based composites. It was revealed that E-glass fiber-based composites had almost double the mechanical properties as compared to jute composites. The interfacial shear strength of the jute and E-glass fiber-based systems was investigated and found to be 2.13 and 4.66 MPa, respectively, measured using the single-fiber fragmentation test. Fracture sides after flexural testing of both types of the composites were studied by scanning electron microscope and the results revealed poor fiber matrix adhesion for jute-based composites when compared to that of the E-glass fiber composites.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Natural Fiber Reinforced Composites · Mechanical Behavior of Composites · Fiber-reinforced polymer composites

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Nuclear and Radiation Chemistry Division, Institute of Nuclear Science and Technology Bangladesh Atomic Energy Commission, Dhaka 1000, Bangladesh,

Nuclear and Radiation Chemistry Division, Institute of Nuclear Science and Technology Bangladesh Atomic Energy Commission, Dhaka 1000, Bangladesh

Department of Applied Chemistry and Chemical Technology, University of Dhaka Dhaka 1000, Bangladesh

References (26)

Show source-provided references
1. Seible, F. and Karbhari, V.M. ( 1996). Advanced Composites for Civil Engineering Applications in the United States. In: Proceedings of the 1st International Conference on Composites in Infrastructure, pp. 21-37, January, Tucson, AZ.
2. 10.1016/S1359-835X(98)00157-210.1016/S1359-835X(98)00157-2 ↗
3. Mishra, S. · Sci. Technol. · 2003 · 63 · 1377
4. 10.1002/app.2036910.1002/app.20369 ↗
5. Mohanty, A.K. · Mater. Eng. · 2000 · 276 · 1
6. Joseph, P.V. · Interf. · 2002 · 9 · 171
7. Cantero, G. · Sci. Technol. · 2003 · 63 · 1247
8. 10.1177/00219983980320090410.1177/002199839803200904 ↗
9. Cameron, N.M. · Glass Technol. · 1968 · 9 · 14
10. 10.1002/(SICI)1098-2329(199924)18:4<351::AID-ADV6>3.0.CO;2-X10.1002/(SICI)1098-2329(199924)18:4<351::AID-ADV6>3.0.CO;2-X ↗
11. Wittig W. ( 1994). Einsatz von Naturfasern in Kfz-Bauteilen, In: Kunstoffe im Automobilbau, VDI-Verlag, Dusseldorf, Germany, pp. 1-7.
12. Hill, S. ( 1997). New Scientist, Vol. 1, p. 36.
13. Cantero, G. · Sci. Technol. · 2003 · 9 · 1247
14. 10.1080/0360255950800959910.1080/03602559508009599 ↗
15. Rahman, S.M.M.A. · J. Rein. Plast. Comp · 2008
16. 10.1002/app.1359310.1002/app.13593 ↗
17. Cabral, F.S. · Testi. · 2003 · 22 · 907
18. National Physical Laboratory Report No. MATC(A) (2001). 16: 1-69.
19. 10.1016/S0143-7496(99)00068-810.1016/S0143-7496(99)00068-8 ↗
20. 10.1016/S1359-835X(01)00018-510.1016/S1359-835X(01)00018-5 ↗
21. Slivka, M.A. · I. Raw Material Evaluation and Measurement of Fiber-matrix Interfacial Adhesion, J. Biomed. Mater. Res. · 1997 · 36 · 469
22. 10.1016/0022-5096(65)90035-910.1016/0022-5096(65)90035-9 ↗
23. 10.1080/0021846830807491110.1080/00218468308074911 ↗
24. 10.1007/BF0111603110.1007/BF01116031 ↗
25. 10.1163/15685610332134084010.1163/156856103321340840 ↗
26. Honggang, W. · , East China University of Technology, Fuhe Cailiao Xuebao · 1999 · 16 · 51