Tensile properties, void contents, dispersion and fracture behaviour of 3D printed carbon nanofiber reinforced composites
Source abstract
Abstract
In this paper, additive manufacturing technology has been used in processing carbon nanofiber (CNF) reinforced thermoplastic composites through fused deposition modeling (FDM). The effects of nanofiber concentrations, nozzle geometries on void contents, and tensile properties of FDM printed nanocomposites have been studied. The contact angles and void geometries have been characterized as a function of bead spreading orientations. Such measurements were carried out using micrographs of optical and scanning electron microscopy (SEM) examinations. The dispersion and orientation of nanofiber in polylactic acid (PLA) matrix have been studied using transmission electron microscopy observations. Finally, the fracture surfaces of both neat PLA and CNF/PLA nanocomposites have been investigated in order to understand the failure mechanism. The results show improved modulus, strength, and strain up to elastic limit in CNF/PLA nanocomposites in comparison to neat PLA matrix. The square nozzle geometry shows increased tensile strength and reduced void geometry in comparison to circular shaped nozzle. Three types of voids such as inter-bead, intra-bead, and interfacial bead were observed with total voids ranging from 24% to 30% with circular nozzle. The level of void content is reduced to about 7% for square nozzle. Contact angles and bead orientation play an important role in forming void contents. CNF/PLA nanocomposites exhibit decreased contact angle and higher void contents in comparison to neat PLA resin. Transmission electron microscopy study of CNF/PLA nanocomposites show uniform dispersion of carbon nanofibers with aligned orientation in both composite filament and three-dimensional printed specimen. Fractured surfaces of CNF/PLA nanocomposites show fiber pullout mechanism and comparatively coarse surface topography indicating higher fractured energy than neat polylactic acid resin.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Additive Manufacturing and 3D Printing Technologies · Bone Tissue Engineering Materials · 3D Printing in Biomedical Research
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Department of Aerospace Engineering and Mechanics, The University of Alabama, Tuscaloosa, AL, USA
References (26)
Show source-provided references
1. Ning F · Compos Part B Eng
2. ASTM F2792-12a · 2012
3. Villalpando L, Eiliat H, andUrbanic RJ. An optimization approach for components built by fused deposition modeling with parametric internal structures. Procedia CIRP 2014; 17: 800-805.10.1016/j.procir.2014.02.050 ↗
4. 10.1016/S0921-5093(00)01810-410.1016/S0921-5093(00)01810-4 ↗
5. 10.1007/s00170020001610.1007/s001700200016 ↗
6. 10.1016/j.matdes.2015.06.05310.1016/j.matdes.2015.06.053 ↗
7. 10.1108/RPJ-01-2013-001210.1108/RPJ-01-2013-0012 ↗
8. 10.1108/1355254051057336510.1108/13552540510573365 ↗
9. 10.1016/S0166-3615(98)00127-410.1016/S0166-3615(98)00127-4 ↗
10. 10.1177/073168441769564810.1177/0731684417695648 ↗
11. 10.1016/j.compositesb.2016.11.03410.1016/j.compositesb.2016.11.034 ↗
12. 10.1016/S0142-9612(01)00232-010.1016/S0142-9612(01)00232-0 ↗
13. Bellini A. Fused deposition of ceramics: a comprehensive experimental, analytical and computational study of material behavior, fabrication process and equipment design . PhD dissertation, Drexel University, Philadelphia, PA, 2002.
14. Ning F, Cong W, Wei J, Wang S, et al. Additive manufacturing of CFRP composites using fused deposition modeling: Effects of carbon fiber content and length. In: Proceedings of the ASME 2015 International Manufacturing Science and Engineering Conference , 8 June 2015, pp. 1–7.10.1115/MSEC2015-9436 ↗
15. 10.1016/j.compscitech.2014.10.00910.1016/j.compscitech.2014.10.009 ↗
16. 10.2478/amm-2013-018610.2478/amm-2013-0186 ↗
17. 10.1088/0957-4484/23/8/08550210.1088/0957-4484/23/8/085502 ↗
18. 10.1016/j.compositesa.2015.05.01410.1016/j.compositesa.2015.05.014 ↗
19. 10.1002/app.1249610.1002/app.12496 ↗
20. 10.1002/adma.20140180410.1002/adma.201401804 ↗
21. 10.1038/srep1118110.1038/srep11181 ↗
22. 10.1016/j.compositesa.2016.03.01310.1016/j.compositesa.2016.03.013 ↗
23. Gray IVRW, Baird DG, andBohn JH. Thermoplastic composites reinforced with long fiber thermotropic liquid crystalline polymers for fused deposition modeling. Polym Compos 1998: 19: 383–394.10.1002/pc.10112 ↗
24. Chuang KC, Grady JE, andDraper RD. Additive manufacturing and characterization of Ultem polymers and composites. In: CAMX conference proceedings , Dallas, TX, October 26–29, 2015.
25. Klift FVD, Koga Y, Todoroki A, et al. 3D printing of continuous carbon fibre reinforced thermo-plastic (CFRTP) tensile test specimens. Open Journal of Composite 2015; 6: 18.10.4236/ojcm.2016.61003 ↗
26. ASTM D638-10 · 2010