journal article·2014-12

Mechanical performance of woven kenaf-Kevlar hybrid composites

R Yahaya, SM Sapuan, M Jawaid, Z Leman, ES Zainudin

Publisher page

Abstract

Hybrid composites offer a combination of advantages of constituent components to produce a material with determined properties. In the present work, woven hybrid composite was prepared by hand lay-up method in laminate configuration. Kevlar/kenaf hybrid composites were fabricated with total fibre content of 30% and the ratio of Kevlar/kenaf varies in weight fraction of 78/22, 60/40, 50/50, 26/74, and 32/68, respectively. The Kevlar/epoxy and kenaf/epoxy were also prepared for comparison. The mechanical properties of hybrid, kenaf/epoxy, and Kevlar/epoxy composites were tested. Morphological properties of tensile fracture surface of hybrid composites were studied by scanning electron microscopy. Results have established that the mechanical properties of kenaf-Kevlar hybrid composites are a function of fibre content. The hybrid composites with Kevlar/kenaf (78/22) ratio exhibited better mechanical properties compared to other hybrid composites. This result indicates the potential of Kevlar-kenaf hybrid composite for impact applications.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Natural Fiber Reinforced Composites · Textile materials and evaluations · Cellular and Composite Structures

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Department of Mechanical and Manufacturing Engineering, Universiti Putra Malaysia, Serdang, Selangor, Malaysia

Science and Technology Research Institute for Defence (STRIDE), Kajang, Selangor, Malaysia

Laboratory of Biocomposite Technology, Institute of Tropical Forestry and Forest Products (INTROP), Universiti Putra Malaysia, Serdang, Selangor, Malaysia

Aerospace Manufacturing Research Centre (AMRC), Faculty of Engineering, Universiti Putra Malaysia, Serdang, Selangor, Malaysia

Department of Chemical Engineering, College of Engineering, King Saud University, Riyadh, Saudi Arabia

References (44)

Show source-provided references
1. Thakur VK, Singha AS. Physico-chemical and mechanical characterization of natural fibre reinforced polymer composites. Iran Polym J 2010; 19: 3–16.
2. Singha AS, Thakur VK. Effect of fibre loading on urea-formaldehyde matrix based green composites. Iran Polym J 2008; 17: 861–873.
3. 10.1080/1023666X.2010.51010610.1080/1023666X.2010.510106 ↗
4. 10.1177/073168440810035410.1177/0731684408100354 ↗
5. 10.1016/j.matdes.2014.02.06210.1016/j.matdes.2014.02.062 ↗
6. 10.1016/j.matdes.2014.01.04310.1016/j.matdes.2014.01.043 ↗
7. 10.1177/20412479120030020310.1177/204124791200300203 ↗
8. Sapuan SM, Kho JY, Zainudin ES, . Materials selection for natural fiber reinforced polymer composites using analytical hierarchy process. Indian J Eng Mater Sci 2011; 18: 255–267.
9. 10.1080/1023666090332551810.1080/10236660903325518 ↗
10. 10.1016/j.carbpol.2014.03.03910.1016/j.carbpol.2014.03.039 ↗
11. 10.1021/sc500087z10.1021/sc500087z ↗
12. 10.1080/1023666X.2014.88001610.1080/1023666X.2014.880016 ↗
13. 10.1177/073168440707002710.1177/0731684407070027 ↗
14. 10.1002/pc.2088010.1002/pc.20880 ↗
15. 10.1007/s10924-010-0210-310.1007/s10924-010-0210-3 ↗
16. Gujjala R Ojha S Acharya S et al. Mechanical properties of woven jute-glass hybrid-reinforced epoxy composite. J Compos Mater. Epub ahead of print 11 September 2013. DOI: 0021998313501924.10.1177/0021998313501924 ↗
17. 10.1177/002199831037155110.1177/0021998310371551 ↗
18. 10.1016/j.matdes.2010.05.02110.1016/j.matdes.2010.05.021 ↗
19. 10.1007/s10118-013-1342-410.1007/s10118-013-1342-4 ↗
20. Yahaya R Sapuan SM Jawaid M et al. Effects of kenaf contents and fiber orientation on physical mechanical and morphological properties of hybrid laminated composites for vehicle spall liners. Polym Compos 2014. DOI: 10.1002/pc.23053.10.1002/pc.23053 ↗
21. 10.1016/j.matdes.2011.11.00610.1016/j.matdes.2011.11.006 ↗
22. 10.1177/073168440809034210.1177/0731684408090342 ↗
23. Khan GMA Terano M Gafur MA et al. Studies on the mechanical properties of woven jute fabric reinforced poly(l-lactic acid) composites. J King Saud Univ - Eng Sci 2013.
24. 10.1016/j.msea.2011.03.04710.1016/j.msea.2011.03.047 ↗
25. 10.1177/073168440606674710.1177/0731684406066747 ↗
26. 10.1177/073168440809643010.1177/0731684408096430 ↗
27. 10.1002/pc.2231310.1002/pc.22313 ↗
28. 10.1016/j.matdes.2012.12.02910.1016/j.matdes.2012.12.029 ↗
29. 10.1016/j.compositesb.2012.12.00410.1016/j.compositesb.2012.12.004 ↗
30. 10.1016/j.compositesa.2010.05.02010.1016/j.compositesa.2010.05.020 ↗
31. 10.1177/002199831036426510.1177/0021998310364265 ↗
32. 10.1016/j.compositesb.2013.08.01910.1016/j.compositesb.2013.08.019 ↗
33. 10.1177/073168441139914110.1177/0731684411399141 ↗
34. 10.3144/expresspolymlett.2010.1010.3144/expresspolymlett.2010.10 ↗
35. 10.1002/pc.2284610.1002/pc.22846 ↗
36. 10.4028/www.scientific.net/AMM.271-272.8110.4028/www.scientific.net/AMM.271-272.81 ↗
37. Ahmed D Hongpeng Z Haijuan K et al. Microstructural developments of poly (p-phenylene terephthalamide) fibers during heat treatment process: a review. Mater Res. Epub ahead of print 9 September 2014. DOI: http://dx.doi.org/10.1590/1516-1439.250313.10.1590/1516-1439.250313 ↗
38. 10.1177/152808371141341110.1177/1528083711413411 ↗
39. Zhu H, Wu B, Li D, . Influence of voids on the tensile performance of carbon/epoxy fabric laminates. J Sci Technol 2011; 27: 69–73.
40. 10.1177/002199831245030510.1177/0021998312450305 ↗
41. 10.1177/073168441246756110.1177/0731684412467561 ↗
42. 10.1177/002199830606528910.1177/0021998306065289 ↗
43. 10.1177/073168441037563910.1177/0731684410375639 ↗
44. 10.1016/j.compstruct.2012.05.02510.1016/j.compstruct.2012.05.025 ↗