journal article·2010-08

FRP-confined Concrete Cylinders: Axial Compression Experiments and Strength Model

Riad Benzaid, Habib Mesbah, Nasr Eddine Chikh

Publisher page

Abstract

The present article deals with the analysis of experimental results, in terms of load-carrying capacity and strain, obtained from tests on plain- and reinforced-concrete (RC) cylinders strengthened with external carbon-fiber-reinforced polymer (CFRP). The parameters considered are the number of composite layers and the compressive strength of unconfined concrete. The effective circumferential FRP failure strain and the effect of the effective lateral confining pressure were investigated. In total, 30 cylinders were subjected to axial compression, which included control specimens. All the test specimens were loaded to failure in axial compression and the behavior of the specimens in the axial and transverse directions was investigated. Test results showed that the CFRP wrap increases the strength and ductility of plain- and RC cylinders significantly. A simple model is presented to predict the compressive strength and axial strain of FRP-confined columns.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Structural Behavior of Reinforced Concrete · Concrete Corrosion and Durability · Structural Load-Bearing Analysis

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Department of Civil Engineering, L.G.C.G.M. Laboratory, INSA de Rennes, 20 Av. des Buttes de Coesmes - 35043 - Rennes cedex, France, , Department of Civil Engineering, L.M.D.C. Laboratory, Mentouri University - Constantine, Route Ain El Bey Constantine 25000, Algeria

Department of Civil Engineering, L.G.C.G.M. Laboratory, INSA de Rennes, 20 Av. des Buttes de Coesmes - 35043 - Rennes cedex, France

Department of Civil Engineering, L.M.D.C. Laboratory, Mentouri University - Constantine, Route Ain El Bey Constantine 25000, Algeria

References (49)

Show source-provided references
1. 10.1139/l98-06710.1139/l98-067 ↗
2. 10.1061/(ASCE)1090-0268(2000)4:3(129)10.1061/(ASCE)1090-0268(2000)4:3(129) ↗
3. 10.1016/j.conbuildmat.2004.05.01210.1016/j.conbuildmat.2004.05.012 ↗
4. 10.1016/j.compositesb.2006.01.00610.1016/j.compositesb.2006.01.006 ↗
5. Saadatmanesh, H. · ACI Struct. J. · 1994 · 91 · 434
6. 10.1061/(ASCE)0733-9445(1997)123:5(583)10.1061/(ASCE)0733-9445(1997)123:5(583) ↗
7. 10.1061/(ASCE)1090-0268(2004)8:4(323)10.1061/(ASCE)1090-0268(2004)8:4(323) ↗
8. 10.1016/j.cemconcomp.2007.03.00910.1016/j.cemconcomp.2007.03.009 ↗
9. 10.1061/(ASCE)1090-0268(2006)10:1(4)10.1061/(ASCE)1090-0268(2006)10:1(4) ↗
10. 10.1016/j.compositesb.2006.06.02110.1016/j.compositesb.2006.06.021 ↗
11. Wang, Y.-C. · Struct. · 2008 · 82 · 132
12. Wang, L.-M. · Struct. · 2008 · 30 · 493
13. Benzaid, R. · Arab. J. Sci. Eng. · 2009 · 34 · 15
14. De Lorenzis, L. · 2001
15. 10.1061/(ASCE)1090-0268(2003)7:3(219)10.1061/(ASCE)1090-0268(2003)7:3(219) ↗
16. Teng, J.G. · 2002
17. NF EN ISO 527-1 (1993). Determination of Tensile Properties of Plastics Materials Part 1: General Principles, p. 9, ISO International Standards.
18. NF EN ISO 527-2 (1993). Determination of Tensile Properties of Plastics Materials Part 2: Test Conditions for Moulding and Extrusion Plastics, p. 5, ISO International Standards.
19. NF EN ISO 527-5 (1997 ). Determination of Tensile Properties of Plastics Materials Part 5: Test Conditions for Unidirectional Fibre-reinforced Plastic Composites , p. 9, ISO International Standards.
20. 10.1016/S1359-8368(00)00021-410.1016/S1359-8368(00)00021-4 ↗
21. Richart, F.E. · 1929
22. 10.1061/(ASCE)0733-9445(1998)124:9(1025)10.1061/(ASCE)0733-9445(1998)124:9(1025) ↗
23. Saafi, M. · ACI Mater. J. · 1999 · 96 · 500
24. 10.1061/(ASCE)1090-0268(1999)3:3(143)10.1061/(ASCE)1090-0268(1999)3:3(143) ↗
25. Matthys, S. · ACI Struct. J. · 2005 · 102 · 258
26. 10.1177/073168440303543010.1177/0731684403035430 ↗
27. 10.1061/(ASCE)0899-1561(1997)9:4(185)10.1061/(ASCE)0899-1561(1997)9:4(185) ↗
28. Toutanji, H. · ACI Mater. J. · 1999 · 96 · 397
29. 10.1016/j.engstruct.2007.01.01010.1016/j.engstruct.2007.01.010 ↗
30. Miyauchi, K. · Trans. Jpn. Concr. Inst. · 1999 · 21 · 143
31. 10.1061/(ASCE)0733-9445(2002)128:5(612)10.1061/(ASCE)0733-9445(2002)128:5(612) ↗
32. 10.1016/S0950-0618(03)00045-X10.1016/S0950-0618(03)00045-X ↗
33. 10.1016/j.conbuildmat.2005.01.02210.1016/j.conbuildmat.2005.01.022 ↗
34. Ilki, A. · Retrofitting of Concrete Structures by Externally Bonded FRPs, Fib with Emphasis on Seismic Applications, Bulletin · 2006 · 35 · 123
35. 10.1061/(ASCE)1090-0268(2007)11:2(201)10.1061/(ASCE)1090-0268(2007)11:2(201) ↗
36. 10.1016/j.conbuildmat.2005.01.02910.1016/j.conbuildmat.2005.01.029 ↗
37. 10.1139/l00-01910.1139/l00-019 ↗
38. Yang, X.
39. 10.1007/BF0248209010.1007/BF02482090 ↗
40. 10.1016/j.conbuildmat.2006.12.00910.1016/j.conbuildmat.2006.12.009 ↗
41. 10.1680/macr.1982.34.121.19110.1680/macr.1982.34.121.191 ↗
42. Rousakis, T.C. · Struct. · 2008 · 41 · 1595
43. Siddhawartha, M. · ACI Struct. J. · 2005 · 102 · 383
44. 10.1061/(ASCE)1090-0268(2003)7:1(31)10.1061/(ASCE)1090-0268(2003)7:1(31) ↗
45. Karabinis, A.I.
46. 10.1061/(ASCE)1090-0268(2004)8:4(315)10.1061/(ASCE)1090-0268(2004)8:4(315) ↗
47. 10.1061/(ASCE)1090-0268(2002)6:4(224)10.1061/(ASCE)1090-0268(2002)6:4(224) ↗
48. 10.1016/j.cemconcomp.2006.07.00710.1016/j.cemconcomp.2006.07.007 ↗
49. Ilki, A. · Bull. Istanbul Tech. Univ. · 2003 · 53 · 118