Tensile and flexural properties of natural fiber reinforced polymer composites: A review
Source abstract
Abstract
In recent years, researchers and scientists are facing problems in terms of environmental imbalance and global warming owing to numerous use of composite materials prepared by synthetic fibers and petrochemical polymers. Hence, an increasing attention has been devoted to the research and development of polymer composites reinforced with the natural fibers. The natural fibers are the most suitable alternative of synthetic fibers due to their biodegradability, eco-friendliness and acceptable mechanical properties. The natural fibers are attracting the researchers and scientists to exploit their properties by amalgamating them with the polymer. The properties of natural fiber reinforced polymer composites mainly depend upon various factors such as properties of fibers and matrices, fiber loading percentage, size and orientation of fibers, stacking sequences, degree of interfacial bonding, fiber surface treatments, hybridization and incorporation of additives and coupling agents. Tensile and flexural tests are the most important investigations to predict the applications of the materials. A good number of research has been carried out on tensile and flexural properties of natural fiber reinforced polymer composites. In this paper, a review on tensile and flexural properties of natural fiber reinforced polymer composites in terms of effects of fiber weight fraction, geometry, surface treatments, orientations and hybridization is presented. Moreover, recent applications of natural fiber reinforced polymer composites are also presented in this study.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Natural Fiber Reinforced Composites · Tribology and Wear Analysis · Mechanical Engineering and Vibrations Research
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Mechanical Engineering Department, Madan Mohan Malaviya University of Technology, Gorakhpur, Uttar Pradesh, India
Mechanical Engineering Department, Motilal Nehru National Institute of Technology Allahabad, Allahabad, Uttar Pradesh, India
References (100+)
Show source-provided references
1. Ever BJ. · 2017
2. Agarwal R · ARPN J Eng Appl Sci · 2015 · 10 · 2217
3. Bansal S · Mater Today · 2017 · 4 · 3182
4. 10.1016/S0266-3538(03)00103-910.1016/S0266-3538(03)00103-9 ↗
5. 10.1023/A:102654642676410.1023/A:1026546426764 ↗
6. Benin MA · Int J Appl Eng Res · 2015 · 10 · 10109
7. 10.1002/(SICI)1097-4628(19960222)59:8<1329::AID-APP17>3.0.CO;2-010.1002/(SICI)1097-4628(19960222)59:8<1329::AID-APP17>3.0.CO;2-0 ↗
8. 10.1002/(SICI)1098-2329(199924)18:4<351::AID-ADV6>3.0.CO;2-X10.1002/(SICI)1098-2329(199924)18:4<351::AID-ADV6>3.0.CO;2-X ↗
9. Ku H · Composites: Part B · 2011 · 85610.1016/j.compositesb.2011.01.010 ↗
10. Kauffman AJ, Black RS, Stanley AJ. Apparatus for injection molding fiber-reinforced thermoset plastic articles, http://google.com/patents/us4752201 [1987, accessed 2 December 2017].
11. Lopez AR · Polym Test · 2017 · 59 · 12710.1016/j.polymertesting.2017.01.025 ↗
12. Chin CW · Wear · 2009 · 267 · 9
13. de Melo RP · J Compos Mater · 2017 · 51 · 110.1177/0021998317690446 ↗
14. Katogi H, Takemura K, Sebori R. Fatigue property of natural fiber after alkali treatment. In: Proceedings of the 2 nd International Conference on High Performance and Optimum Design of Structures and Materials (HPSM 2016) , Southampton, UK, 19–21 September 2016, pp.343–350. DOI: 10.2495/HPSM16032110.2495/HPSM160321 ↗
15. 10.1177/00219983920260100610.1177/002199839202601006 ↗
16. 10.1016/j.matdes.2012.07.01410.1016/j.matdes.2012.07.014 ↗
17. 10.1016/j.indcrop.2014.06.03210.1016/j.indcrop.2014.06.032 ↗
18. Dai D, Fan M. Wood fibers as reinforcements in natural fiber composite: structure, properties, processing and applications. In: Hodzic A and Shanks R (eds) Natural fiber composites: materials, processes and properties . Cambridge: Woodhead Publishing, 2014, pp.3–65.10.1533/9780857099228.1.3 ↗
19. Weyenberg IVD · Compos Sci Technol · 2003 · 63 · 124110.1016/S0266-3538(03)00093-9 ↗
20. 10.1016/j.progpolymsci.2012.04.00310.1016/j.progpolymsci.2012.04.003 ↗
21. 10.1177/073168440403979910.1177/0731684404039799 ↗
22. Singh AA · 2017 · 29
23. 10.1016/j.compscitech.2004.12.03610.1016/j.compscitech.2004.12.036 ↗
24. 10.1007/s10924-006-0042-310.1007/s10924-006-0042-3 ↗
25. Rosa IMD · Mater Des · 2010 · 31 · 239710.1016/j.matdes.2009.11.059 ↗
26. 10.1177/002199831141362310.1177/0021998311413623 ↗
27. 10.1002/pc.2046110.1002/pc.20461 ↗
28. 10.1007/s10086-006-0836-x10.1007/s10086-006-0836-x ↗
29. 10.1016/S0266-3538(00)00101-910.1016/S0266-3538(00)00101-9 ↗
30. 10.1590/1807-1929/agriambi.v3n3p367-37910.1590/1807-1929/agriambi.v3n3p367-379 ↗
31. 10.1007/s12221-015-0705-610.1007/s12221-015-0705-6 ↗
32. 10.1016/j.compstruct.2005.07.02310.1016/j.compstruct.2005.07.023 ↗
33. 10.1016/j.compscitech.2006.08.02410.1016/j.compscitech.2006.08.024 ↗
34. 10.1016/S0266-3538(03)00100-310.1016/S0266-3538(03)00100-3 ↗
35. 10.1007/s10924-010-0185-010.1007/s10924-010-0185-0 ↗
36. 10.1016/j.carbpol.2006.04.02310.1016/j.carbpol.2006.04.023 ↗
37. 10.1177/073168441038115110.1177/0731684410381151 ↗
38. 10.1007/s10853-006-0657-810.1007/s10853-006-0657-8 ↗
39. 10.1007/s10853-006-0546-110.1007/s10853-006-0546-1 ↗
40. Ramachandran M · Int J Text Eng Process · 2015 · 1 · 2395
41. 10.1016/j.compscitech.2003.09.02410.1016/j.compscitech.2003.09.024 ↗
42. 10.14429/dsj.64.732310.14429/dsj.64.7323 ↗
43. 10.1002/(SICI)1097-4628(19990124)71:4<531::AID-APP2>3.0.CO;2-I10.1002/(SICI)1097-4628(19990124)71:4<531::AID-APP2>3.0.CO;2-I ↗
44. Mazumdar SK. Composites manufacturing materials, product, and process engineering . 1st ed. Boca Raton, FL: CRC Press, 2002.10.1201/9781420041989 ↗
45. Mohanty AK, Misra M, Drzal LT, eds) Natural fibers, biopolymers, and biocomposites: an introduction. In: Natural fibers, biopolymers, and biocomposites . Boca Raton, FL: Taylor & Francis, 2005, pp.15–50.10.1201/9780203508206.ch1 ↗
46. 10.1007/s10924-017-0970-010.1007/s10924-017-0970-0 ↗
47. 10.5267/j.esm.2017.3.00210.5267/j.esm.2017.3.002 ↗
48. Ghazilan ALA, Mokhtar H, Dawood MS, et al. Effect of stitching on the tensile mechanical property of empty fruit bunch oil palm fiber. IOPconference series: Material Science & Engineering 2017; 184: 1-6.10.1088/1757-899X/184/1/012051 ↗
49. 10.1016/j.indcrop.2010.09.00910.1016/j.indcrop.2010.09.009 ↗
50. 10.1016/j.indcrop.2011.07.00110.1016/j.indcrop.2011.07.001 ↗
51. 10.1016/j.matdes.2014.03.01410.1016/j.matdes.2014.03.014 ↗
52. Mohammed L · Int J Polym Sci · 2015 · 110.1155/2015/243947 ↗
53. 10.1002/pc.75014020210.1002/pc.750140202 ↗
54. Azwa ZN · J Mater Des Appl · 2017 · 1
55. 10.1016/j.conbuildmat.2016.12.19910.1016/j.conbuildmat.2016.12.199 ↗
56. Nabila S, Juwono AL, Roseno S. Effect of weight fractions of jute fiber on tensile strength and deflection temperature of jute fiber/polypropylene composites. Indonesia: IOP Publishing, 2016.10.1088/1757-899X/196/1/012029 ↗
57. Olaitan AJ · Am J Mech Eng · 2017 · 5 · 76
58. 10.1016/j.ijbiomac.2017.01.02910.1016/j.ijbiomac.2017.01.029 ↗
59. 10.1007/s10965-012-9859-810.1007/s10965-012-9859-8 ↗
60. 10.1016/j.compositesa.2017.01.00410.1016/j.compositesa.2017.01.004 ↗
61. Rasel SM · Elastom Compos · 2011 · 46 · 204
62. 10.1007/s12541-016-0122-910.1007/s12541-016-0122-9 ↗
63. 10.1007/s12221-012-0606-x10.1007/s12221-012-0606-x ↗
64. Khanlou HM · J Compos Mater · 2017 · 1
65. 10.1177/07316844970160080610.1177/073168449701600806 ↗
66. Nair V, Khosla P and Ramachandra M. · Res J Pharm Biol Chem Sci · 2004 · 7
67. Ibrahim H · J Polym Environ · 2017 · 25 · 110.1007/s10924-016-0823-2 ↗
68. Latha PS · J Indus Text · 2015 · 1
69. Fazita MRN, Jayaraman K, Bhattacharyya Det al. Green composites made of bamboo fabric and poly(lactic) acid for packaging applications – a review. Materials 2016; 9: 1–29.10.3390/ma9060435 ↗
70. Singh JIP, Dhawan V, Singh S, et al. Study of effect of surface treatment on mechanical properties of natural fiber reinforced composites. In: Materials today: proceedings , Hyderabad, 2017.
71. 10.1016/j.compositesb.2015.03.02110.1016/j.compositesb.2015.03.021 ↗
72. Kitagawa K, Ishiaku US, Mizoguchi M, et al. Bamboo-based ecocomposites and their potential applications. In: Natural fibers, biopolymers and biocomposites . USABoca Raton, FL: CRC Press, 2005, pp.400–414.10.1201/9780203508206.ch11 ↗
73. Sature P · Am J Mater Sci · 2015 · 5 · 133
74. Gupta MK · Am J Polym Sci Eng · 2017 · 5 · 1
75. Ticoalu A, Aravinthan T, Cardona F. A review of current development in natural fiber composites for structural and infrastructure applications, https://eprints.usq.edu.au/9253 (2010, accessed 5 November 2017).
76. Sahu P · J Reinf Plast Compos · 2017 · 1
77. Pickering KL · Composite Part A · 2015 · 1
78. Olivia SL, Juwono AL, Roseno S. Tensile properties and deflection temperature of polypropylene/sumberejo kenaf fiber composites with fiber content variation. In: IOP conferene series: materials science and engineering , vol. 196. Indonesia: IOP Publishing, 2016.10.1088/1757-899X/196/1/012023 ↗
79. Amir N, Abidin AZk, Shiri FBM- Effects of fibre configuration on mechanical properties of banana fibre/PP/MAPP natural fibre reinforced polymer composite. In: Procedia engineering , Malaysia, 2 May 2017, Vol. 184, pp.573-580.10.1016/j.proeng.2017.04.140 ↗
80. 10.1016/j.compositesb.2017.05.03810.1016/j.compositesb.2017.05.038 ↗
81. Kitagawa K, Ishlaku US, Mizoguchi Met al. Bamboo-based ecocomposites and their potential applications. In: Mohanty AK, Mishra M, and Drzal LT (eds) Natural fibers, biopolymers, and biocomposites . Boca Raton, FL: Taylor & Francis, 2005, pp.400–415.10.1201/9780203508206.ch11 ↗
82. Singh B, Gupta M. Natural fiber composites for building applications. In: Mohanty AK, Mishra M, and Drzal LT (eds) Natural fibers, biopolymer, and biocomposites . Boca Raton, FL: CRC Press Taylor & Francis, 2015, pp.272–301.
83. Ray D, Rout J. Thermoplastic biocomposites. In: Mohanty AK, Mishra M, and Drzal LT (eds) Natural fibers, biopolymers and biocomposites . Boca Raton, FL: CRC Press Taylor & Francis, 2005, pp.302–356.10.1201/9780203508206.ch9 ↗
84. Bisaria H, Gupta MK, Shandilya Pet al. Effect of fiber length on mechanical properties of randomly oriented short jute fibre reinforced epoxy composites. In: Singh SK (ed.) Materials today , Hyderabad, India, 2 September 2015; Vol. 2, pp.1193-1199.10.1016/j.matpr.2015.07.031 ↗
85. Kale A, Raghu N, Chauhan SSet al. Lantana fiber-filled polypropylene composite. In: Pandey KK, Ramakantha V, Chauhan SS, and Kumar ANA (eds) Wood is good . Singapore: Springer, 2017, pp.343–351.10.1007/978-981-10-3115-1_31 ↗
86. 10.1080/00914037.2011.61733810.1080/00914037.2011.617338 ↗
87. Shahinur S, Ullah A. Quantifying the uncertainty associated with the material properties of a natural fiber, http://sciencedirect.com/science/article/pii/s2212827116313968 (2017, accessed 29 10 2017).
88. Jayaseelan C · Bioresources · 2017 · 12 · 286410.15376/biores.12.2.2864-2871 ↗
89. Maciel NOd, Ribeiro CG, Ferreira Jet al. Comparative mechanical analysis between epoxy composite reinforced with random short curaua fibers and aligned long curaua fibers. In: Proceedings of the 3rd Pan American Materials Congress (eds Meyers MA, Benavides HAC, and Colorado HA) San Diego, California, 26 February – 2 March 2017, pp.67–74.10.1007/978-3-319-52132-9_7 ↗
90. Morreale M · Materials · 2017 · 1
91. Kumar TM · J Nat Fibers · 2017 · 1
92. 10.1002/app.2506510.1002/app.25065 ↗
93. 10.1299/jsmea.47.55110.1299/jsmea.47.551 ↗
94. Hemachandran R · Text · 2017 · 25 · 32
95. 10.1177/073168441142681010.1177/0731684411426810 ↗
96. 10.1007/s12221-011-0073-910.1007/s12221-011-0073-9 ↗
97. Gopal P, Raja VKB, Chandrasekaran Met al. Woven hybrid composites – tensile and flexural properties of jute mat fibres with epoxy composites. IOP conferene series: materials science and engineering 2017; 183: 1-5.10.1088/1757-899X/183/1/012001 ↗
98. 10.1016/j.msea.2010.09.00510.1016/j.msea.2010.09.005 ↗
99. 10.1016/j.jtice.2014.02.01510.1016/j.jtice.2014.02.015 ↗
100. 10.1016/j.indcrop.2014.04.01210.1016/j.indcrop.2014.04.012 ↗