journal article·2005-01

Interface Modification and Mechanical Properties of Natural Fiber-Polyolefin Composite Products

M. Sain, P. Suhara, S. Law, A. Bouilloux

Publisher page

Abstract

Natural fibers are potentially a high-performance and non-abrasive reinforcing fiber source. In this study, mechanical properties of polypropylene (PP) composites with various natural fibers such as old newsprint, kraft pulp and hemp were studied. The effect of a low-molecular weight, maleated type coupling agent, on the mechanical properties of these natural fiber-filled PP composites was also investigated and the results showed that this can be used as a good interface modifier for improving the strength properties of the PP-filled composites and the optimum level of the coupling agent was found to be around 3-4 percentage by weight of the composite. Kraft pulp and hemp fiber-filled composites showed better tensile, flexural and un-notched impact strength compared to the glass fiber-filled composites at the same fiber loading. Hybrid composite produced using 10 wt% of glass fiber and 30 wt% of hemp fiber showed only a marginal improvement in the mechanical properties.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Natural Fiber Reinforced Composites · Tribology and Wear Analysis · Mechanical Behavior of Composites

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Faculty of Forestry, University of Toronto, Toronto, ON, Canada, M5S 3B3,

Faculty of Forestry, University of Toronto, Toronto, ON, Canada, M5S 3B3

Atofina, Paris, France

References (22)

Show source-provided references
1. 10.1002/apmc.1993.05210010410.1002/apmc.1993.052100104 ↗
2. 10.1080/0360255940801073310.1080/03602559408010733 ↗
3. Gassan, J. · Composites Part A · 1997 · 28 · 99310.1016/S1359-835X(97)00042-0 ↗
4. 10.1002/(SICI)1097-4628(19970516)64:7<1267::AID-APP4>3.0.CO;2-H10.1002/(SICI)1097-4628(19970516)64:7<1267::AID-APP4>3.0.CO;2-H ↗
5. 10.1016/S1359-835X(00)00098-110.1016/S1359-835X(00)00098-1 ↗
6. 10.1007/s10019000010810.1007/s100190000108 ↗
7. 10.1002/pen.1169110.1002/pen.11691 ↗
8. 10.1002/pen.76024150410.1002/pen.760241504 ↗
9. 10.1002/app.1993.07049020210.1002/app.1993.070490202 ↗
10. 10.1016/S0014-3057(96)00051-110.1016/S0014-3057(96)00051-1 ↗
11. 10.1023/A:100478493187510.1023/A:1004784931875 ↗
12. 10.1016/S0266-3538(01)00219-610.1016/S0266-3538(01)00219-6 ↗
13. 10.1002/app.1246110.1002/app.12461 ↗
14. Sain, M.M. · J. Adhesion Sci. Technol. · 1993 · 7 · 4910.1163/156856193X00196 ↗
15. 10.1080/0360255930801923710.1080/03602559308019237 ↗
16. 10.1002/adv.1993.06012020510.1002/adv.1993.060120205 ↗
17. 10.1002/app.1991.07042030710.1002/app.1991.070420307 ↗
18. 10.1002/(SICI)1097-4628(19980906)69:10<1891::AID-APP1>3.0.CO;2-910.1002/(SICI)1097-4628(19980906)69:10<1891::AID-APP1>3.0.CO;2-9 ↗
19. 10.1002/app.1141910.1002/app.11419 ↗
20. 10.1080/0091403910803151910.1080/00914039108031519 ↗
21. 10.1023/A:100479040915810.1023/A:1004790409158 ↗
22. 10.1081/PPT-12002499910.1081/PPT-120024999 ↗