journal article·2011-03

Morphological aspects and mechanical properties of single bamboo fibers and flexural characterization of bamboo/ epoxy composites

L. Osorio, E. Trujillo, A.W. Van Vuure, I. Verpoest

Publisher page

Abstract

A novel mechanical extraction process was developed to obtain long bamboo fibers to be used as reinforcement in structural composites. A single-fiber tensile test at four different span lengths for fibers of the bamboo species Guadua angustifolia was performed. Strength values of 800 MPa and Young’s modulus of 43 GPa were obtained. Unidirectional bamboo fiber/epoxy composites (BFC) were produced with untreated and alkali-treated fibers to evaluate the effectiveness of the new reinforcing material. Flexural tests were performed with two fiber orientations (longitudinal and transverse). The longitudinal flexural strength is higher when untreated fibers are used while the treatment benefits the longitudinal flexural stiffness of the composite. Transverse strength increases at lower alkali concentrations, but the transverse three-point bending strength of untreated bamboo in epoxy is already quite high at around 33 MPa. The results illustrate that these bamboo fibers present a natural and renewable option to reinforce composites in several applications where glass fiber and traditional natural fibers are used nowadays.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Natural Fiber Reinforced Composites · Bamboo properties and applications · Tree Root and Stability Studies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Department of Metallurgy and Materials Engineering, Katholieke Universiteit Leuven, Belgium,

Department of Metallurgy and Materials Engineering, Katholieke Universiteit Leuven, Belgium

References (49)

Show source-provided references
1. 10.1016/j.compositesa.2003.09.01610.1016/j.compositesa.2003.09.016 ↗
2. 10.1023/A:102101392191610.1023/A:1021013921916 ↗
3. 10.1007/978-1-4419-9050-1_1410.1007/978-1-4419-9050-1_14 ↗
4. 10.1023/B:JMSC.0000012943.27090.8f10.1023/B:JMSC.0000012943.27090.8f ↗
5. 10.1016/S0079-6700(98)00018-510.1016/S0079-6700(98)00018-5 ↗
6. 10.1299/jsmea.47.54110.1299/jsmea.47.541 ↗
7. Brouwer W. · FAO Report · 2004
8. 10.1016/j.compstruct.2005.07.02310.1016/j.compstruct.2005.07.023 ↗
9. 10.1016/j.compositesa.2005.05.04510.1016/j.compositesa.2005.05.045 ↗
10. Okubo K. and Fujii T. Eco-composites using natural fibers and their mechanical properties. In: Brebbia C and de Wilde W (eds) High performance structures and composites . Southampton: WIT Press, 2002, pp.77-85.
11. 10.1016/S0266-3538(03)00096-410.1016/S0266-3538(03)00096-4 ↗
12. 10.1177/00219983860200010210.1177/002199838602000102 ↗
13. 10.1016/S0040-6031(99)00161-610.1016/S0040-6031(99)00161-6 ↗
14. Jayamol G. and Thomas S. Short fibre-reinforced plastics composites. In: Cheremisinoff N (ed.) Handbook of Engineering Polymeric Materials. New York: Marcel Dekker Publisher, 1997, pp.811-837.
15. 10.1016/S0266-3538(98)00169-910.1016/S0266-3538(98)00169-9 ↗
16. Van De Weyenberg I. · 2005
17. 10.1016/S0266-3538(01)00046-X10.1016/S0266-3538(01)00046-X ↗
18. 10.1002/app.2302810.1002/app.23028 ↗
19. 10.1007/BF0098075510.1007/BF00980755 ↗
20. Trujillo EE
21. Liese W. · INBAR Technical Report · 1998 · 204
22. Tono T. · J Jpn Wood Res Soc · 1962 · 8 · 245
23. Parasmewaran N. · Wood Sci Technol · 1976 · 10 · 23110.1007/BF00350830 ↗
24. Parasmewaran N. · Cellul Chem Technol · 1980 · 14 · 587
25. 10.1163/22941932-9000129610.1163/22941932-90001296 ↗
26. Liese W. · Bamboo Workshop · 1985 · 196
27. Ciro H. · Revista Facultad Nacional de Agronomía · 2005 · 58 · 2709
28. 10.1299/jsmea.47.57010.1299/jsmea.47.570 ↗
29. 10.1515/hfsg.1972.26.6.20210.1515/hfsg.1972.26.6.202 ↗
30. Londoño X. · Bamboo Sci Cult: J Am Bamboo Soc · 2002 · 16 · 18
31. 10.1002/(SICI)1097-4628(20000404)76:1<83::AID-APP11>3.0.CO;2-L10.1002/(SICI)1097-4628(20000404)76:1<83::AID-APP11>3.0.CO;2-L ↗
32. Jain S. · J Mater Sci · 1993 · 27 · 598
33. 10.1016/j.compositesa.2003.09.01710.1016/j.compositesa.2003.09.017 ↗
34. 10.1023/A:102113001943510.1023/A:1021130019435 ↗
35. Tanaka R.
36. Londoño X.
37. 10.2307/239971910.2307/2399719 ↗
38. Londoño X. · J Am Bamboo Soc · 1998 · 12 · 37
39. Riaño N. · J Am Bamboo Soc · 2002 · 16 · 43
40. Moreno L. · Revista Ingeniería & Desarrollo · 2006 · 20 · 125
41. 10.1007/BF0238572910.1007/BF02385729 ↗
42. 10.1007/BF0116599310.1007/BF01165993 ↗
43. 10.1163/15691590332232072010.1163/156915903322320720 ↗
44. Shito T., Okubo K. and Fujii T. Development of eco-composites using natural bamboo fibres and their mechanical properties. In: Brebbia C and de Wilde W (eds) High performance structures and composites . Southampton: WIT Press, 2002, pp.175-182.
45. Katayama T., Tanaka T., Suzuki Y., Nagai S. and Aoyama E. Study on injection molding of bamboo fiber reinforced thermo-plastics. In: Brebbia C and de Wilde W (eds) High performance structures and composites . Southampton: WIT Press, 2002, pp.87-96.
46. 10.1177/073168440504355010.1177/0731684405043550 ↗
47. Shibata S. and Fukumoto I. Effects of bamboo and kenaf fibres on the flexural modulus of bio-composites . Department of Mechanical Systems Engineering, University of the Ryukyus, Okinawa, Japan, 2004, pp.14-17.
48. 10.1299/jsmea.47.55110.1299/jsmea.47.551 ↗
49. 10.1016/j.compositesa.2010.01.00510.1016/j.compositesa.2010.01.005 ↗