journal article·2012-03

Improving the mechanical properties of natural fibre fabric reinforced epoxy composites by alkali treatment

Libo Yan, Nawawi Chouw, Xiaowen Yuan

Publisher page

Abstract

In this article, three bio-composites, i.e. flax, linen and bamboo fabric reinforced epoxy resin, were manufactured using a vacuum bagging technique. The influence of alkali treatment (with 5 wt% NaOH solution for 30 min) on tensile properties of flax, linen and bamboo single-strand yarns, surface morphology and mechanical properties (with respect to tensile and flexural properties) of the composites were investigated. It was found that the failure mechanism of single-strand fibres under tension consists of fibre breakage and slippage simultaneously. The alkali treatment had a negative effect on the tensile strength and modulus of the flax, linen and bamboo single-strand yarns. However, after the treatment, the tensile and flexural properties of all the composites increased, e.g. the tensile and flexural strength of the treated flax/epoxy composite increased 21.9% and 16.1%, compared to the untreated one. After the treatment in all the composites, the tensile fractured surfaces exhibited an improvement of fibre/epoxy interfacial adhesion.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Natural Fiber Reinforced Composites · Bamboo properties and applications · Additive Manufacturing and 3D Printing Technologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Department of Civil and Environmental Engineering, The University of Auckland, New Zealand

Department of Mechanical Engineering, The University of Auckland, New Zealand

References (35)

Show source-provided references
1. 10.1016/j.msea.2006.01.07410.1016/j.msea.2006.01.074 ↗
2. 10.1016/j.matdes.2010.07.02410.1016/j.matdes.2010.07.024 ↗
3. 10.1016/j.compscitech.2006.08.02410.1016/j.compscitech.2006.08.024 ↗
4. 10.1016/j.progpolymsci.2008.10.00210.1016/j.progpolymsci.2008.10.002 ↗
5. 10.1016/j.compositesa.2006.08.00910.1016/j.compositesa.2006.08.009 ↗
6. Carus M, Scholz L. Targets for bio-based composites and natural fibres. Biowerkstoff Report. ISSN 1867-1217, Edition 8, March 2011, p.24.
7. 10.1016/j.jhazmat.2007.01.10310.1016/j.jhazmat.2007.01.103 ↗
8. 10.1016/j.compositesb.2005.04.00110.1016/j.compositesb.2005.04.001 ↗
9. 10.1016/j.matdes.2010.04.05010.1016/j.matdes.2010.04.050 ↗
10. 10.1023/B:JMSC.0000017779.08041.4910.1023/B:JMSC.0000017779.08041.49 ↗
11. 10.1016/S0266-3538(03)00093-910.1016/S0266-3538(03)00093-9 ↗
12. 10.1177/00405175030730010110.1177/004051750307300101 ↗
13. 10.1016/j.compositesa.2010.04.00510.1016/j.compositesa.2010.04.005 ↗
14. 10.1016/j.compositesa.2005.08.01610.1016/j.compositesa.2005.08.016 ↗
15. 10.1016/S1359-835X(02)00082-910.1016/S1359-835X(02)00082-9 ↗
16. 10.1177/073168440809504710.1177/0731684408095047 ↗
17. 10.1243/14644207JMDA30410.1243/14644207JMDA304 ↗
18. 10.1177/073168440607252610.1177/0731684406072526 ↗
19. 10.1177/073168440505827110.1177/0731684405058271 ↗
20. 10.1177/004051750505395610.1177/0040517505053956 ↗
21. 10.1163/15685540175325542210.1163/156855401753255422 ↗
22. 10.1016/j.compositesa.2009.03.00210.1016/j.compositesa.2009.03.002 ↗
23. 10.1016/S1386-1425(01)00697-710.1016/S1386-1425(01)00697-7 ↗
24. ASTM. Standard test mothods for density and specific gravity of plastics by displacement. ASTM D792, 2008. Philadelphia, PA: ASTM.
25. ASTM. Standard test mothods for void content of reinforced plastics. ASTM D2734, 2009. Philadelphia, PA: ASTM.
26. Heslehurst RB. Composite structures engineering design vs. fabrication requirements. In: ACUN-5 international composites conference. Developments in composites: advanced, infrastructure, natural and nano-composites, Sydney, Australia, 11–14 July 2006. Sydney, Australia: UNSW.
27. ASTM. Standard test mothod for tensile properties of yarns by the single-strand method. ASTM D2256, 2010. Philadelphia, PA: ASTM.
28. ASTM. Standard test mothods for tensile properties of polymer matrix composite materials. ASTM D3039, 2008. Philadelphia, PA: ASTM.
29. ASTM. Standard test mothods for flexural properties of unreinforced and reinforced plastics and eletrical insulating materials. ASTM D790, 2010. Philadelphia, PA: ASTM.
30. 10.1016/S0961-9534(97)10040-X10.1016/S0961-9534(97)10040-X ↗
31. 10.1023/A:101492562125210.1023/A:1014925621252 ↗
32. 10.1016/j.compositesa.2010.01.00510.1016/j.compositesa.2010.01.005 ↗
33. 10.1002/app.1311010.1002/app.13110 ↗
34. 10.1299/jsmea.47.54110.1299/jsmea.47.541 ↗
35. 10.1007/BF0058131210.1007/BF00581312 ↗