Beyond nanosizing: Crystallographic continuity promotes more homogeneous reactions in WO3 conversion anodes
Source abstract
Abstract
Tungsten trioxide (WO 3 ) is a promising conversion anode for lithium ion batteries because of its high theoretical and volumetric capacities. In this study, WO 3 anodes with controlled particle size and crystallinity were evaluated in liquid electrolyte lithium batteries, sodium batteries, and oxide solid state lithium batteries. WO 3 underwent sequential reactions involving Li x WO 3 formation, Li−W−O intermediate phases, and subsequent W/Li 2 O nanocomposite formation. Excessively small WO 3 particles did not improve cycle performance despite the shortened diffusion distance. Instead, WO 3 particles with high crystallographic continuity showed superior electrochemical properties. Heat treatment at 700 °C improved crystallographic continuity while suppressing particle coarsening, resulting in a volumetric capacity of 2148 mA h cm −3 retained for about 270 cycles. Galvanostatic intermittent titration technique analysis, resistivity measurements, and oxygen analysis indicated that the improved cyclability could not be explained solely by Li + diffusivity, electronic conductivity, or oxygen deficiency. Rather, high crystallographic continuity likely promoted homogeneous lithiation and alleviated localized stress during conversion reactions. These findings indicate the importance of crystallographic continuity in WO 3 conversion anodes.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Advancements in Battery Materials · Advanced Battery Materials and Technologies · Thermal Expansion and Ionic Conductivity
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (25)
Show source-provided references
1. Challenges for rechargeable Li batteries10.1021/cm901452z ↗
2. Nano-sized transition-metal oxides as negative-electrode materials for lithium-ion batteries10.1038/35035045 ↗
3. Phase evolution of conversion-type electrode for lithium ion batteries10.1038/s41467-019-09931-2 ↗
4. Conversion reaction in the binder-free anode for fast-charging Li-ion batteries based on WO3 nanorods10.1021/acsaem.0c00844 ↗
5. Rational design of WO3 nanostructures as the anode materials for lithium-ion batteries with enhanced electrochemical performance10.1007/s40820-014-0006-4 ↗
6. Controllable synthesis of hexagonal WO3 nanostructures and their application in lithium batteries10.1088/0022-3727/41/15/155417 ↗
7. High performance energy storage devices based on WO3 nanowire arrays/carbon cloth integrated electrodes10.1039/c3ta10831g ↗
8. Tungsten oxide nanorod architectures as 3D anodes in binder-free lithium-ion batteries10.1039/C8NR07636G ↗
9. Preparation and electrochemical characterization of ultrathin WO3−x/C nanosheets as anode materials in lithium ion batteries10.1007/s12274-016-1373-6 ↗
10. Characteristics of amorphous WO3 thin films as anode materials for lithium-ion batteries10.1007/s10854-020-03656-5 ↗
11. Nanostructured WO3 thin film as a new anode material for lithium-ion batteries10.1016/j.apsusc.2009.10.085 ↗
12. Reaction pathway and wiring network dependent Li/Na storage of micro-sized conversion anode with mesoporosity and metallic conductivity10.1039/C4TA05241B ↗
13. Supernormal conversion anode consisting of high-density MoS2 bubbles wrapped in thin carbon network by self-sulfuration of polyoxometalate complex10.1021/acsnano.7b03665 ↗
14. Highly reversible conversion anodes composed of ultralarge monolithic grains with seamless intragranular binder and wiring network10.1021/acsami.9b07169 ↗
15. Visualization and quantification of electrochemical and mechanical degradation in Li ion batteries10.1126/science.1241882 ↗
16. Origin and hysteresis of lithium compositional spatiodynamics within battery primary particles10.1126/science.aaf4914 ↗
17. Preparation of Li3BO3−Li2SO4 glass-ceramic electrolytes for all-oxide lithium batteries10.1016/j.jpowsour.2014.07.061 ↗
18. Electrical and mechanical properties of glass and glass-ceramic electrolytes in the system Li3BO3−Li2SO410.2109/jcersj2.17026 ↗
19. Preparation and characterization of glass solid electrolytes in the pseudoternary system Li3BO3−Li2SO4−Li2CO310.1016/j.ssi.2017.05.009 ↗
20. Reinvestigations of the Li2O−WO3 system10.1007/s10973-017-6355-8 ↗
21. Room-temperature preparation of all-solid-state lithium batteries using TiO2 anodes and oxide electrolytes10.1021/acs.jpcc.2c02497 ↗
22. Solid-state lithium batteries composed of hematite and oxide electrolyte10.1016/j.matlet.2024.136674 ↗
23. Origins of large voltage hysteresis in high-energy-density metal fluoride lithium-ion battery conversion electrodes10.1021/jacs.6b00061 ↗
24. α-Fe2O3 conversion anodes with improved Na-storage properties by Sb addition10.1016/j.matchemphys.2021.125023 ↗
25. Effect of composite formation with various metals on improving the anode performance of hematite for Na-ion batteries10.1021/acsaem.4c00358 ↗