N, P Co-doped lignin/petroleum coke-derived carbon nanofibers as advanced anode for high-performance sodium-ion storage
Source abstract
Abstract
Sodium-ion batteries (SIBs) have emerged as a promising alternative to lithium-ion batteries for large-scale energy storage due to the natural abundance and low cost of sodium resources. However, the large ionic radius of Na⁺ leads to sluggish diffusion kinetics and poor compatibility with conventional graphite anodes, posing great challenges for the development of high-performance SIB anodes. Herein, a novel N, P co-doped soft-hard carbon nanofiber composite (PLCFP) was successfully fabricated via electrospinning combined with subsequent pyrolysis, using low-cost petroleum coke (PC) as the soft carbon precursor and renewable lignin as the hard carbon precursor. The carbonization temperature was optimized, and the PLCFP sample carbonized at 700 °C (PLCFP-700) exhibited the most outstanding sodium storage performance. At a current density of 25 mA g⁻¹, PLCFP-700 delivered a high reversible capacity of 339.5 mAh g⁻¹ after 100 cycles, and maintained a reversible capacity of 224.3 mAh g⁻¹ even after 1000 cycles at a high current density of 500 mA g⁻¹, accompanied by excellent cycling stability and rate capability. The enhanced electrochemical performance was attributed to the synergistic effects of N/P co-doping and the unique porous nanofiber architecture: heteroatom doping introduced abundant structural defects and expanded the carbon interlayer spacing (0.387 nm) to facilitate Na⁺ intercalation/adsorption, while the interconnected one-dimensional nanofiber framework accelerated electron transport, reduced internal resistance and shortened Na⁺ diffusion paths. Additionally, the combination of PC-derived soft carbon and lignin-derived hard carbon effectively suppressed the excessive graphitization of PC and optimized the carbon microcrystalline structure. This work provides a feasible and low-cost strategy for the high-value utilization of industrial by-products (petroleum coke) and biomass waste (lignin), and offers a new insight into the design of advanced carbon-based anodes for high-performance SIBs.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advancements in Battery Materials · Supercapacitor Materials and Fabrication · Advanced battery technologies research
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (54)
Show source-provided references
1. Nano-engineering of advanced carbon materials for sodium-ion batteries10.1002/smll.202007431 ↗
2. Heterogeneous bimetallic selenides encapsulated within graphene aerogel as advanced anodes for sodium ion batteries10.1016/j.jcis.2024.05.082 ↗
3. Hollow CoSe2-ZnSe microspheres inserted in reduced graphene oxide serving as advanced anodes for sodium ion batteries10.1016/j.jcis.2023.12.125 ↗
4. Biomass-derived B/N/P co-doped porous carbons as bifunctional materials for supercapacitors and sodium-ion batteries10.1039/D4TA02115K ↗
5. Hierarchical porous hard carbon derived from rice husks for high-performance sodium ion storage10.1016/j.colsurfa.2023.130927 ↗
6. Overview of hard carbon anode for sodium-ion batteries: influencing factors and strategies to extend slope and plateau regions
7. Synergistic dual-engineering of hard carbons via graphene oxide nanosheets: enabling ultrahigh ICE sodium-ion batteries through edge passivation and catalytic SEI design
8. Soft template-induced self-assembly strategy for sustainable production of porous carbon spheres as anode towards advanced sodium-ion batteries10.1016/j.cej.2024.153646 ↗
9. Engineering of N, P co-doped hierarchical porous carbon from sugarcane bagasse for high-performance supercapacitors and Sodium-ion batteries10.1016/j.colsurfa.2023.131715 ↗
10. A solvothermal pre-oxidation strategy converting pitch from soft carbon to hard carbon for enhanced sodium storage
11. Sulfur-Enriched pitch-based carbon nanofibers with Lotus root-like axial pores for boosting sodium storage performance10.1002/bte2.70006 ↗
12. Electrochemical storage mechanism of sodium in carbon materials: a study from soft carbon to hard carbon10.1016/j.carbon.2021.06.066 ↗
13. Preparation of hierarchical porous carbons from a coal tar pitch modified by fluid catalytic cracking oil for a high-performance supercapacitor10.1007/s10853-021-06317-y ↗
14. A new N/O Co-doped soft-hard carbon nanofibers composite for advanced sodium storage10.1016/j.est.2025.115819 ↗
15. Increasing the interlayer spacing and generating closed pores to produce petroleum coke-based carbon materials for sodium ion storage10.1016/S1872-5805(24)60858-9 ↗
16. Carboxyl-induced microcrystalline regulation of petroleum coke-based carbon anode materials for enhanced sodium storage10.1016/j.jpowsour.2025.236505 ↗
17. Lignin-based electrospun carbon nanofibrous webs as free-standing and binder-free electrodes for sodium ion batteries10.1016/j.jpowsour.2014.08.119 ↗
18. Pitch-derived amorphous carbon as high performance anode for sodium-ion batteries10.1016/j.ensm.2015.10.003 ↗
19. One stone two birds: pitch assisted microcrystalline regulation and defect engineering in coal-based carbon anodes for sodium-ion batteries10.1016/j.ensm.2023.01.042 ↗
20. Multitrack boosted hard carbon anodes: innovative paths and advanced performances in sodium-ion batteries
21. Understanding the regulation of sulfur on surface-dominated hard carbon anode for sodium ion batteries10.1016/j.jpowsour.2024.235685 ↗
22. N/P co-doped porous carbon derived from agroindustry waste of peanut shell for Sodium-ion storage10.1016/j.est.2024.113682 ↗
23. Biomimetic-Mineralization-assisted self-activation creates a delicate porous structure in carbon material for high-rate sodium storage
24. Combustion activation induced solid-state synthesis for N, B co-doped carbon/zinc borate anode with a boosting of sodium storage performance
25. Phosphorus-doped hard carbon nanofibers prepared by electrospinning as an anode in sodium-ion batteries10.1021/acsami.8b05618 ↗
26. Highly conductive pitch-based carbon nanofiber/MnO2 composites for high-capacitance supercapacitors10.1016/j.jallcom.2018.03.305 ↗
27. Nitrogen-doped carbon nanofibers defining heterogeneous Fe3Se4-NiSe2 nanoparticles as anodes for sodium ion batteries10.1016/j.est.2025.116337 ↗
28. Lignin-based carbon fibers: insight into structural evolution from lignin pretreatment, fiber forming, to pre-oxidation and carbonization10.1016/j.ijbiomac.2022.12.053 ↗
29. Tuning morphology, defects and functional group types in hard carbon via phosphorus doped for rapid sodium storage10.1016/j.carbon.2021.07.040 ↗
30. Increasing the interlayer spacing and generating closed pores to produce petroleum coke-based carbon materials for sodium ion storage10.1016/S1872-5805(24)60858-9 ↗
31. Ge-Si/C nanofiber composite with enhanced cyclic stability and rate capability for lithium-ion batteries10.1021/acsanm.4c05936 ↗
32. Regulating the nanosheets structures in pitch-derived amorphous carbons for efficient sodium-ion storage
33. Uniformly dispersing Sb2Se3 nanoparticles in porous carbon as an anode material for enhancing sodium storage capacity10.1039/D4CC05782A ↗
34. Scalable steam-assisted pyrolysis for hard carbon anodes toward high-performance alkali-ion storage
35. Tuning porous carbon into hard carbon via an SN2 reaction for enhanced sodium storage10.1021/acs.nanolett.5c06425 ↗
36. Oxidation-induced molecular structural transformations in pitches with different softening points toward high performance sodium storage
37. Increasing accessible subsurface to improving rate capability and cycling stability of sodium-ion batteries10.1002/adma.202100808 ↗
38. N, S self‐doped porous carbon with enlarged interlayer distance as anode for high performance sodium ion batteries10.1002/er.6294 ↗
39. A homologous N/P-codoped carbon strategy to streamline nanostructured MnO/C and carbon toward boosted lithium-ion capacitors10.1016/j.carbon.2022.09.019 ↗
40. Nitrogen defect engineering and π-conjugation structure decorated g-C3N4 with highly enhanced visible-light photocatalytic hydrogen evolution and mechanism insight10.1016/j.cej.2021.131844 ↗
41. Strategic N/P self-doped biomass-derived hierarchical porous carbon for regulating the supercapacitive performances10.1016/j.renene.2022.12.032 ↗
42. Screening heteroatom configurations for reversible sloping capacity promises high-power Na-ion batteries10.1002/anie.202116394 ↗
43. Microscopic elucidation of solid-electrolyte interphase (SEI) film formation via atomistic reaction simulations: importance of functional groups of electrolyte and intact additive molecules
44. Revealing the effect of hard carbon structure on the sodium storage behavior by using a model hard carbon precursor10.1016/j.est.2023.108406 ↗
45. Ultrahigh phosphorus doping of carbon for high-rate sodium ion batteries anode10.1002/aenm.202003911 ↗
46. Growth of carbon nanofibers through chemical vapor deposition for enhanced sodium ion storage10.1016/j.materresbull.2020.111049 ↗
47. Sodium storage behavior and long cycle stability of boron-doped carbon nanofibers for sodium-ion battery anodes10.1016/j.electacta.2022.141730 ↗
48. Electrochemical performance of electrospun carbon nanofibers asfree-standing and binder-free anodes for sodium-ionand lithium-ion batteries10.1016/j.electacta.2014.07.079 ↗
49. N, P co-doped pitch derived soft carbon nanoboxes as high-performance anodes for sodium-ion batteries
50. Phosphorus and boron enhanced N-doped carbon nanofibers for enhanced lithium ion storage10.1039/D5RA00982K ↗
51. Binder less-integrated freestanding carbon film derived from pitch as light weight and high-power anode for sodium-ion battery10.1016/j.electacta.2020.136566 ↗
52. Redox-crosslinked graphene networks with enhanced electrochemical capacitance10.1039/C4TA01309C ↗
53. Origin of enhanced reversible Na ion storage in hard carbon anodes through p-type molecular doping10.1039/D2TA02295H ↗
54. Extended “adsorption - insertion” model: a new insight into the sodium storage mechanism of hard carbons