Sodium contamination in electrolyte: Consequences for high power NMC831–graphite lithium-ion cells
Source abstract
Abstract
Sodium (Na + ) is a common trace impurity in batteries originating from raw materials, manufacturing processes, and/or recycling pathways. In this study, the impact of Na + contamination in LP572 electrolyte on the electrochemical performance of high-power NMC 831 –graphite full cells was systematically investigated. Even at low concentrations (as low as 3 μg/mL), Na + led to a noticeable decrease in discharge capacity and a significant increase in cell impedance compared with cells containing Na + -free electrolyte. The presence of Na + , a larger alkali-metal cation, adversely affects interfacial stability at both electrodes. Degradation phenomena such as intraparticle cracking and graphite exfoliation are observed, likely arising from increased mechanical stress associated with enhanced volume changes during cycling. Although Na + can, in principle, insert into graphite under certain conditions, its larger ionic radius alters both interfacial chemistry and structural evolution within the electrodes. The degradation effects induced by Na + contamination were further analyzed through post-mortem characterization, including morphological analysis and Raman spectroscopy of aged graphite anodes and NMC 831 cathodes.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Advancements in Battery Materials · Fiber-reinforced polymer composites · Advanced Battery Technologies Research
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (43)
Show source-provided references
1. Review of achieved purities after Li-ion batteries hydrometallurgical treatment and impurities effects on the cathode performance10.3390/batteries7030060 ↗
2. Recycling of spent lithium-ion batteries in view of lithium recovery: a critical review10.1016/j.jclepro.2019.04.304 ↗
3. Direct recycling of lithium-ion cathode: a green solution (applied to laptop batteries)10.1149/1945-7111/acef5d ↗
4. Hydrometallurgical recovery of metal values from sulfuric acid leaching liquor of spent lithium-ion batteries10.1016/j.wasman.2014.12.023 ↗
5. Influence of metallic contaminants on the electrochemical and thermal behavior of Li-ion electrodes10.1016/j.jpowsour.2021.230760 ↗
6. Exploring a green route for recycling spent lithium-ion batteries: revealing and solving deep screening problem10.1016/j.jclepro.2020.120269 ↗
7. Selective regeneration of lithium from spent lithium-ion batteries using ionic substitution stimulated by mechanochemistry10.1016/j.jclepro.2020.123612 ↗
8. The synthesis of Li (CoMnNi) O2 cathode material from spent-Li ion batteries and the proof of its functionality in aqueous lithium and sodium electrolytic solutions10.1016/j.jpowsour.2016.12.115 ↗
9. Discharging of spent cylindrical lithium-ion batteries in sodium hydroxide and sodium chloride for a safe recycling process10.1007/s11837-023-06093-x ↗
10. Unveiling sodium ion pollution in spray-dried precursors and its implications for the green upcycling of spent lithium-ion batteries10.1021/acs.est.1c05511 ↗
11. Effect of Na from the leachate of spent Li-ion batteries on the properties of resynthesized Li-ion battery cathodes10.1016/j.jallcom.2021.159808 ↗
12. Analytical and electrochemical characterization of mechanochemically recovered graphite from spent lithium‐ion batteries for anode additive applications
13. Enhancement of Li-ion battery performance of graphite anode by sodium ion as an electrolyte additive10.1016/j.elecom.2003.09.003 ↗
14. The mechanisms of lithium and sodium insertion in carbon materials10.1149/1.1379565 ↗
15. Deciphering electrolyte dominated Na+ storage mechanisms in hard carbon anodes for sodium‐ion batteries10.1002/advs.202305414 ↗
16. A comparative study on the impact of different glymes and their derivatives as electrolyte solvents for graphite co-intercalation electrodes in lithium-ion and sodium-ion batteries10.1039/C6CP00651E ↗
17. Deciphering the paradox between the Co-intercalation of sodium-solvent into graphite and its irreversible capacity10.1016/j.ensm.2019.12.026 ↗
18. Impact of trace impurities in the electrolyte on the electrochemistry of positive electrodes for lithium-ion batteries10.1149/1945-7111/adf672 ↗
19. Electrochemical impedance spectroscopy─ a tutorial10.1021/acsmeasuresciau.2c00070 ↗
20. Sodium storage behavior in natural graphite using ether‐based electrolyte systems10.1002/adfm.201402984 ↗
21. Evolution of the electrochemical interface in sodium ion batteries with ether electrolytes10.1038/s41467-019-08506-5 ↗
22. Achieving superb sodium storage performance on carbon anodes through an ether-derived solid electrolyte interphase10.1039/C6EE03367A ↗
23. Electrochemical insertion of sodium in pitch-based carbon fibres in comparison with graphite in NaClO4–ethylene carbonate electrolyte10.1016/S0013-4686(99)00276-5 ↗
24. Room-temperature sodium-ion batteries: improving the rate capability of carbon anode materials by templating strategies10.1039/c1ee01744f ↗
25. Electrochemical Na insertion and solid electrolyte interphase for hard‐carbon electrodes and application to Na‐ion batteries10.1002/adfm.201100854 ↗
26. Electrochemical intercalation of sodium in graphite10.1016/0167-2738(88)90351-7 ↗
27. Lamellar compound of sodium with graphite10.1038/181409a0 ↗
28. New results about the sodium-graphite system10.1016/0379-6779(80)90071-5 ↗
29. Approaching the limits of transparency and conductivity in graphitic materials through lithium intercalation10.1038/ncomms5224 ↗
30. The use of in-situ Raman spectroscopy in investigating carbon materials as anodes of alkali metal-ion batteries10.1016/S1872-5805(21)60007-0 ↗
31. Real-time imaging of Na+ reversible intercalation in “Janus” graphene stacks for battery applications10.1126/sciadv.abf0812 ↗
32. Ultrafast solvent-assisted sodium ion intercalation into highly crystalline few-layered graphene10.1021/acs.nanolett.5b04187 ↗
33. Charge transfer during sodium-ion intercalation in graphite-like anodes as determined by Raman spectroscopy10.1016/j.cartre.2025.100547 ↗
34. Raman spectrometry measurements for the 2D mapping of the degradation products on aged graphite anodes of cylindrical Li-ion battery cells10.1063/5.0171158 ↗
35. Raman and infrared spectral studies of anhydrous Li2CO3 and Na2CO310.1063/1.1674754 ↗
36. Van der Waals density functional study of the energetics of alkali metal intercalation in graphite10.1039/C3RA47187J ↗
37. First-principles study of alkali metal-graphite intercalation compounds10.1016/j.jpowsour.2013.06.057 ↗
38. Cohesion and structure in stage-1 graphite intercalation compounds10.1103/PhysRevB.32.2538 ↗
39. Enhancement of stability and electronic properties of ultra-high nickel cathodes by aluminium and boron codoping studied by combined density functional theory and neural network models
40. Synthesis, structure, and electrochemical properties of the layered sodium insertion cathode material: NaNi1/3Mn1/3Co1/3O210.1021/cm300466b ↗
41. Comparison of electrochemical performances of olivine NaFePO 4 in sodium-ion batteries and olivine LiFePO4 in lithium-ion batteries10.1039/C2NR32758A ↗
42. Handbook of X-ray photoelectron spectroscopy
43. In-depth interfacial chemistry and reactivity focused investigation of lithium–imide-and lithium–imidazole-based electrolytes10.1021/acsami.6b04406 ↗