journal article·2026-11

Precursor design and scalable solvent-based decalcification of CaSi2 for stable amorphous silicon nanosheets lithium-ion battery anodes

Ding-He Li, Victor Jr Lau, Hsiao-Ping Hsu, Chung-Wen Lan

Publisher page

Abstract

The superior mechanical flexibility and isotropic volume expansion of amorphous silicon (a-Si), compared to crystalline silicon (c-Si), make it an excellent next-generation anode material for lithium-ion batteries (LIBs). However, scalable synthesis of a-Si remains challenging due to high precursor costs and hazardous processing routes. Using stable, low-cost CaSi₂, we report a scalable route to a-Si via a facile, solvent-based SnCl₂ decalcification process. Residual bulk silicon phases are known to act as crystallization seeds that promote c-Si formation from CaSi₂. To address this, we employ in-house melt spinning of CaSi₂ to suppress bulk Si phases, establishing precursor phase purity as a critical requirement for amorphization. The resulting two-dimensional amorphous silicon nanosheets (a-SiNS) exhibits a mesoporous architecture, high structural integrity, and excellent thermal stability up to 800 °C. Electrochemical evaluation reveals an initial specific capacity of 2712 mAh g⁻¹ and a reversible capacity of 1090 mAh g⁻¹ at 2 A g⁻¹ after 300 cycles, demonstrating outstanding long-term cycling stability and rate capability. These performances arise from the synergistic combination of the stress-relieving amorphous structure, Sn-assisted thermal stabilization, and the two-dimensional mesoporous framework, highlighting CaSi₂-derived a-SiNS as a practical and scalable platform for high-performance silicon anodes.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advancements in Battery Materials · Semiconductor materials and interfaces · Silicon Nanostructures and Photoluminescence

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (59)

Show source-provided references
1. Silicon as a potential anode material for Li-ion batteries: where size, geometry and structure matter10.1039/C5NR05116A ↗
2. Confronting issues of the practical implementation of Si anode in high-energy lithium-ion batteries10.1016/j.joule.2017.07.006 ↗
3. Toward sustainable reuse of retired lithium-ion batteries from electric vehicles10.1016/j.resconrec.2020.105249 ↗
4. The status of representative anode materials for lithium-ion batteries10.1002/tcr.202300004 ↗
5. Recent progress in silicon-based materials for performance-enhanced lithium-ion batteries10.3390/molecules28052079 ↗
6. Structural design and challenges of micron-scale silicon-based lithium-ion batteries
7. Guidelines and trends for next-generation rechargeable lithium and lithium-ion batteries10.1039/C7CS00863E ↗
8. Group IVA element (Si, Ge, Sn)-based alloying/dealloying anodes as negative electrodes for full-cell lithium-ion batteries10.1002/smll.201702000 ↗
9. 2D materials: emerging applications of elemental 2D materials
10. Recent advances in silicon-based electrodes: from fundamental research toward practical applications
11. Advances in coating materials for silicon-based lithium-ion battery anodes10.3390/en17194970 ↗
12. Amorphous TiO2 shells: a vital elastic buffering layer on silicon nanoparticles for high-performance and safe lithium storage
13. Silicon/carbon composite anode materials for lithium-ion batteries10.1007/s41918-018-00028-w ↗
14. Research progress on silicon/carbon composite anode materials for lithium-ion battery10.1016/j.jechem.2017.12.012 ↗
15. Recent advances in interface engineering of silicon anodes for enhanced lithium-ion battery performance
16. Comparison between crystalline and amorphous silicon as anodes for lithium-ion batteries: electrochemical performance from practical cells and lithiation behavior from molecular dynamics simulations10.3390/ma18030515 ↗
17. Fracture of crystalline silicon nanopillars during electrochemical lithium insertion10.1073/pnas.1201088109 ↗
18. Size-dependent fracture of silicon nanoparticles during lithiation10.1021/nn204476h ↗
19. Concurrent reaction and plasticity during initial lithiation of crystalline silicon in lithium-ion batteries10.1149/MA2012-01/23/967 ↗
20. Two-phase electrochemical lithiation in amorphous silicon10.1021/nl304379k ↗
21. In situ TEM of two-phase lithiation of amorphous silicon nanospheres10.1021/nl3044508 ↗
22. Direct gas phase synthesis of amorphous Si/C nanoparticles as anode material for lithium-ion battery10.1016/j.jallcom.2021.159315 ↗
23. Mesoporous amorphous silicon: a simple synthesis of a high-rate and long-life anode material for lithium-ion batteries10.1002/ange.201608146 ↗
24. In situ electrochemical lithiation/delithiation observation of individual amorphous Si nanorods10.1021/nn2029814 ↗
25. Alumina-coated patterned amorphous silicon as the anode for a lithium-ion battery with high coulombic efficiency10.1002/adma.201102568 ↗
26. Si- and Ge-based anode materials for Li-, Na-, and K-ion batteries: a perspective from structure to electrochemical mechanism10.1002/smll.201905260 ↗
27. Zintl phases as reactive precursors for synthesis of novel silicon and germanium-based materials10.3390/ma12071139 ↗
28. Oxidation pathways towards Si amorphous layers or nanocrystalline powders as Li-ion batteries anodes10.1007/s40243-014-0032-7 ↗
29. Scalable synthesis of 2D Si nanosheets10.1002/adma.201701777 ↗
30. Layered amorphous silicon derived from chemical delithiation of LiSix: a promising anode material for lithium-ion batteries10.1007/s11581-025-06331-z ↗
31. Additive-assisted complex-formation-regulated decalcification of calcium disilicide for enhanced exfoliation and stable bare silicon nanosheet anodes in lithium-ion batteries10.1016/j.jpowsour.2025.237076 ↗
32. A review of metal silicides for lithium-ion battery anode applications10.1007/s40195-020-01095-z ↗
33. Turning residual chlorides into exfoliation agents: fully gas-phase exfoliation of silicon nanosheets via amine-driven expansion for lithium-ion batteries10.1039/D5TA05918F ↗
34. Rapid CO2 exfoliation of Zintl phase CaSi2-derived ultrathin free-standing Si/SiOx/C nanosheets for high-performance lithium storage10.1007/s40843-021-1708-6 ↗
35. Luminescent silicon nanosheet paracrystals from elemental- and hydride-based syntheses of CaSi2 precursors: implications for photonic and optoelectronic applications10.1021/acsanm.3c00001 ↗
36. Rapid CO2 exfoliation of Zintl phase CaSi2-derived ultrathin free-standing Si/SiOx/C nanosheets for high-performance lithium storage10.1007/s40843-021-1708-6 ↗
37. Low-oxidized siloxene nanosheets with high capacity, capacity retention, and rate capability in lithium-based batteries10.1002/admi.202102238 ↗
38. Two-dimensional siloxene nanosheets: impact of morphology and purity on electrochemistry10.1021/acsami.3c00355 ↗
39. Melt-spun calcium disilicide and its exfoliation performance10.1016/j.jmrt.2025.09.269 ↗
40. Exfoliability of two-dimensional silicon nanosheets from calcium disilicide and its enhanced performance as lithium-ion battery anode material10.1016/j.est.2023.108399 ↗
41. Few-layer silicene nanosheets with superior lithium-storage properties
42. Molten-salt chemical exfoliation process for preparing two-dimensional mesoporous Si nanosheets as high-rate Li-storage anode10.1007/s12274-018-2153-2 ↗
43. Synthesis of siloxene derivatives with organic groups10.1246/cl.2010.938 ↗
44. Silicon nanoparticles with chemically tailored surfaces10.1002/aoc.1602 ↗
45. Raman scattering from hydrogenated microcrystalline and amorphous silicon10.1088/0022-3719/15/2/019 ↗
46. Cornlike ordered mesoporous silicon particles modified by nitrogen-doped carbon layer for the application of Li-ion battery10.1021/acsami.7b10922 ↗
47. Surface coating constraint induced anisotropic swelling of silicon in Si–void@SiOx nanowire anode for lithium-ion batteries
48. Delicate structural control of Si–SiOx–C composite via high-speed spray pyrolysis for Li-ion battery anodes10.1021/acs.nanolett.6b05191 ↗
49. Solvent-induced growth of free-standing 2D Si nanosheets10.1002/smll.202005426 ↗
50. Preparation of nanocrystalline silicon from SiCl4 at 200 °C in molten salt for high-performance anodes for lithium-ion batteries10.1002/anie.201411830 ↗
51. Promoting effect of Si–OH on the decomposition of electrolytes in lithium-ion batteries10.1021/acs.chemmater.0c01022 ↗
52. Two-dimensional siloxene nanosheets: understanding the effect of heat treatment on the surface chemistry and resulting electrochemistry in lithium-based batteries10.1021/acsami.4c22619 ↗
53. Understanding the thermal treatment effect of two-dimensional siloxene sheets and the origin of superior electrochemical energy storage performances10.1021/acsami.8b15323 ↗
54. Boosting initial coulombic efficiency of Si-based anodes: a review10.1007/s42247-020-00080-7 ↗
55. High-rate electrochemical energy storage through Li+ intercalation pseudocapacitance10.1038/nmat3601 ↗
56. Mesoporous MoS2 as a transition metal dichalcogenide exhibiting pseudocapacitive Li- and Na-ion charge storage10.1002/aenm.201501937 ↗
57. SEI: past, present and future10.1149/2.1441707jes ↗
58. Performance enhancing electrolyte additives for lithium ion batteries with silicon anodes10.1149/2.076205jes ↗
59. Silicon solid electrolyte interphase (SEI) of lithium ion battery characterized by microscopy and spectroscopy10.1021/jp404155y ↗