Sustainable circular utilization of natural lepidolite for low-voltage Li-ion battery anode and energy harvesting
Source abstract
Abstract
Conventional lithium-ion batteries (LIBs) with graphite anodes suffer from poor rate performance and lithium dendrite formation, limiting their practical applications. In this work, a lithium-rich layered material, Lepidolite, which exfoliates into two-dimensional flakes, is introduced as a high-performance anode. It delivers a reversible capacity of ~121 mAh g-1 at 200 mA g-1, with high-rate performance at higher current densities (~104.5 mAh g-1 at 500 mA g-1) during lithium intercalation at a low potential (<1.5 V), and exhibits ultra-long rate-cycling stability exceeding 9200 cycles at various current densities. Ex-situ TEM, XPS, and TOF-SIMS analyses reveal the evolution and stability of the solid electrolyte interphase (SEI) during extended cycling. A full-cell LIB with LiFePO4 as the cathode demonstrates stable operation, while spent Lepidolite electrodes are repurposed for energy harvesting, highlighting sustainable reuse. Density functional theory (DFT) calculations indicate that reduced surface oxygen atoms enhance metallicity, thereby increasing the density of states near the Fermi level, which is favorable for Li adsorption. This study demonstrates the sustainable circular utilization of Lepidolite for energy storage and harvesting.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advancements in Battery Materials · Advanced Battery Materials and Technologies · Extraction and Separation Processes
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (45)
Show source-provided references
1. Search for stable host materials as low-voltage anodes for lithium-ion batteries: a mini-review10.1016/j.ensm.2022.11.030 ↗
2. Low voltage anode materials for lithium-ion batteries10.1016/j.ensm.2017.01.009 ↗
3. Hard carbon anode for lithium-, sodium-, and potassium-ion batteries: advancement and future perspective
4. Degradation analysis of Li4Ti5O12 of lithium-ion battery under tram operating conditions10.1109/TTE.2024.3389691 ↗
5. Li4Ti5O12-based anode materials with low working potentials, high rate capabilities and high cyclability for high-power lithium-ion batteries: a synergistic effect of doping, incorporating a conductive phase and reducing the particle size10.1039/C4TA01163E ↗
6. Ti2Nb10O29 microspheres coated with ultrathin N-doped carbon layers by atomic layer deposition for enhanced lithium storage10.1039/C8CC07863G ↗
7. Nanostructured conversion-type anode materials for advanced lithium-ion batteries10.1016/j.chempr.2018.01.003 ↗
8. Towards greener and more sustainable batteries for electrical energy storage10.1038/nchem.2085 ↗
9. Metal oxides and oxysalts as anode materials for Li ion batteries10.1021/cr3001884 ↗
10. Biotene: Earth-Abundant 2D material as sustainable anode for Li/Na-Ion battery10.1021/acsami.3c15664 ↗
11. Ternary metal sulfides as electrode materials for Na/K-Ion batteries and electrochemical supercapacitor: advances/challenges and prospects10.1002/aenm.202401657 ↗
12. Enhancing the performance of Li/Na-Ion batteries with hexagonal boron nitride: advances and opportunities10.1021/acsnano.5c11425 ↗
13. Densification of alloying anodes for high energy lithium-ion batteries: critical perspective on Inter- versus intra-particle porosity10.1002/advs.202403530 ↗
14. Unlocking the potential: atomically thin 2D fluoritene from exfoliated fluorite ore and its electrochemical activity10.1021/acs.nanolett.4c01283 ↗
15. A comprehensive review of atomically thin silicates and their applications10.1088/2053-1583/ad569b ↗
16. 3D-printed flexible energy harvesting devices designed using non-layered two-dimensional natural tourmaline silicates10.1039/D3TC04167K ↗
17. Hydrogen sulfide gas detection using two-dimensional rhodonite silicate10.1021/acs.chemmater.3c01593 ↗
18. Exploring sustainable hydrogen production from alkaline fresh and seawater using natural ore derived 2D Bi 2 S 310.1002/smll.202509283 ↗
19. The role of halogens in terrestrial and extraterrestrial geochemical processes. Surface, crust and mantle10.1080/00206814.2018.1520151 ↗
20. Extraction of lithium from lepidolite by sulfation roasting and water leaching10.1016/j.minpro.2012.03.005 ↗
21. Mechanism of separating muscovite and quartz by flotation10.1007/s11771-014-2341-5 ↗
22. Muscovite mica: flatter than a pancake10.1016/j.susc.2013.10.008 ↗
23. Lepidolite as an emerging lithium resource: recent advances in beneficiation and leaching toward sustainable extraction10.1016/j.jece.2025.118861 ↗
24. Process and mechanism of recovery of lepidolite and spodumene by flotation with synergistic action of alkali corrosion and Mg(II)10.1016/j.powtec.2024.119962 ↗
25. Improved electrochemical performance of binder-free multi-layered silicon/carbon thin film electrode for lithium-ion batteries10.1016/j.carbon.2019.07.067 ↗
26. Single-phase ternary compounds with a disordered lattice and liquid metal phase for high-performance Li-Ion battery anodes
27. Design and modification of cathode materials for high energy density aluminum-ion batteries: a review10.1007/s10854-018-9478-1 ↗
28. Rock-salt-templated Mn3O4 nanoparticles encapsulated in a mesoporous 2D carbon matrix: a high rate 2 V anode for lithium-ion batteries with extraordinary cycling stability10.1002/slct.201701575 ↗
29. High electrochemical energy storage in self-assembled nest-like CoO nanofibers with long cycle life10.1007/s11051-016-3401-6 ↗
30. Deciphering sodium-ion storage: 2D-sulfide versus oxide through experimental and computational analyses
31. 2D covalent organic framework covalently anchored with carbon nanotube as high-performance cathodes for lithium and sodium-ion batteries10.1002/smll.202406173 ↗
32. Selective flotation of quartz from feldspar using hydroxypropyl starch as depressant10.1016/j.mineng.2023.108022 ↗
33. Selective separation characteristics of new collector dodecyl dihydroxyethyl methyl ammonium chloride on lepidolite-quartz10.1016/j.colsurfa.2025.136698 ↗
34. Electrospun TiO2–rGO composite nanofibers with ordered mesopores by molecular level assembly: a high performance anode material for lithium-ion batteries10.1002/admi.201600761 ↗
35. Study of photoelectrochemical water splitting using composite films based on TiO2 nanoparticles and nitrogen or boron doped hollow carbon spheres as photoanodes10.1016/j.molcata.2015.10.024 ↗
36. The effect of electrode-electrolyte interface on the electrochemical impedance spectra for positive electrode in Li-Ion battery10.1149/2.0121903jes ↗
37. XPS direct analysis on shale rocks: correlation with kerogen type and maturity10.1016/j.fuel.2019.116004 ↗
38. Plasma-induced interfacial processes in metal halides FTIR gas cell windows10.1007/s41664-023-00274-y ↗
39. C 1s and Au 4f7/2 referenced XPS binding energy data obtained with different aluminium oxides, -hydroxides and -fluorides10.1007/s002160050376 ↗
40. The activation role of Mg2+ in the lepidolite flotation using NaOL10.1016/j.seppur.2024.128035 ↗
41. LiF artifacts in XPS analysis of the SEI for lithium metal batteries10.1021/acsami.4c17553 ↗
42. Impact of solid-electrolyte interphase reformation on capacity loss in silicon-based lithium-ion batteries10.1038/s43246-023-00368-1 ↗
43. Metal hydroxides as a conversion electrode for lithium-ion batteries: a case study with a Cu(OH)2 nanoflower array10.1039/C4TA03379E ↗
44. TPDH-graphene as a new anodic material for lithium ion battery: DFT-based investigations10.1021/acsomega.4c06252 ↗
45. Accelerated Li + desolvation for diffusion booster enabling low‐temperature sulfur redox kinetics via electrocatalytic carbon‐grazfted‐CoP porous nanosheets