journal article·2026-10Open access

Fully printed solid-state lithium-ion battery with improved interface between cathode and solid polymer electrolyte

Rafael S. Pinto, Cristian Mendes-Felipe, Renato Gonçalves, Senentxu Lanceros-Méndez, Carlos M. Costa

Abstract

This describes the development of fully printed solid-state lithium-ion batteries via Direct Ink Writing (DIW), demonstrating the elementary role of the processing solvent in engineering/designing the interface between both solid polymer electrolyte (SPE) and the cathode of C-LiFePO 4 (LFP) components. The SPE was fabricated using a high-dielectric P(VDF-TrFE-CFE) matrix, natural clinoptilolite (CPT), the ionic liquid ([PMPyr][TFSI]), and acetone solvent. By varying the cathode processing solvent among DMF, DMSO, and NMP, we demonstrate that the heterostructure's structural, morphological, and electrochemical characteristics can be systematically tuned. Cathodes processed with DMF exhibited the highest surface roughness (244 nm) and crystallinity (>85%), optimizing low-rate performance (120 mAh⋅g−1 at C/5). Conversely, DMSO yielded a lower surface roughness (160 nm), which increased interfacial contact and reduced overall cell resistance to 700 Ω. Meanwhile, NMP enabled high-rate capability and long-term cycling stability exceeding 200 cycles. These outcomes highlight that interfacial relationship between printed layers is as crucial to battery performance as individual material properties, offering a robust pathway regarding stability, adaptability, and sustainability of energy storage systems.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Advanced Battery Materials and Technologies · Advancements in Battery Materials · Dielectric materials and actuators

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (28)

Show source-provided references
1. Energy storage and clean energy transitions10.1016/j.enpol.2024.114447 ↗
2. Exploring role of microbatteries in enhancing sustainability and functionality of implantable biosensors and bioelectronics10.1016/j.bios.2024.116419 ↗
3. Using the internet of things in smart energy systems and networks10.1016/j.scs.2021.102783 ↗
4. The status and challenging perspectives of 3D-printed micro-batteries10.1039/D3SC06999K ↗
5. Recent advances and future challenges in printed batteries10.1016/j.ensm.2020.03.012 ↗
6. 3D printing of solid electrolyte and the application in all-solid-state batteries10.1002/smtd.202401912 ↗
7. 3D-Printed solid-state electrolytes for next-generation batteries: advances in design, challenges, and future opportunities10.1016/j.enchem.2025.100174 ↗
8. 3D-Printing electrolytes for solid-state batteries10.1002/adma.201707132 ↗
9. Printable solid electrolyte interphase mimic for antioxidative lithium metal electrodes
10. Elevated-temperature 3D printing of hybrid solid-state electrolyte for Li-Ion batteries10.1002/adma.201800615 ↗
11. Printable single-ion polymer nanoparticle electrolytes for lithium batteries10.1002/smsc.202300235 ↗
12. 3D printed composite solid electrolytes for high-performance solid-state batteries
13. A universal room-temperature 3D printing approach towards porous MOF based dendrites inhibition hybrid solid-state electrolytes10.1002/smll.202300066 ↗
14. T. Han, Z. Cui, W. Kuang, Y. Cai, J. Sun, Y.-y. Li, Ferroelectric nanofiber reinforced electrolyte empowers fully 3D-Printed solid-state sodium-ion batteries, Adv. Func. Mater.(n/a) e13625..
15. Ionic liquids in the scope of lithium-ion batteries: from current separator membranes to next generation sustainable solid polymer electrolytes10.1039/D3QM00852E ↗
16. High performance ternary solid polymer electrolytes based on high dielectric Poly(vinylidene fluoride) copolymers for solid state lithium-ion batteries10.1021/acsami.3c03361 ↗
17. Improved electrochemical performance of LiMn1.5M0.5O4 (M=Ni, Co, Cu) based cathodes for lithium-ion batteries10.1016/j.jallcom.2020.157208 ↗
18. Three-component solid polymer electrolytes based on Li-Ion exchanged microporous silicates and an ionic liquid for solid-state batteries10.1002/adem.202200849 ↗
19. High dielectric constant poly(vinylidene fluoride-trifluoroethylene-chlorofluoroethylene) for capacitive pressure and bending sensors10.1016/j.polymer.2020.123349 ↗
20. Influence of ionic liquid characteristics on the performance of ternary solid polymer electrolytes with poly(vinylidene fluoride-co-hexafluoropropylene) and zeolite10.1016/j.jpowsour.2023.233095 ↗
21. Achieving dynamic stability and electromechanical resilience for ultra-flexible battery technology10.1038/s43246-024-00703-0 ↗
22. Influence of solvent evaporation rate in the preparation of carbon-coated Lithium iron phosphate cathode films on battery performance10.1002/ente.201500392 ↗
23. Structural and magnetic properties of LiFePO4 and lithium extraction effects10.1002/zaac.200600090 ↗
24. A novel synthesis and characterization of LiFePO4 and LiFePO4/C as a cathode material for lithium-ion battery10.1016/j.jpowsour.2013.07.077 ↗
25. Characterisation of batteries by electrochemical impedance spectroscopy10.1016/j.egyr.2020.03.029 ↗
26. 3D printing nanostructured solid polymer electrolytes with high modulus and conductivity10.1002/adma.202204816 ↗
27. 3D printing of a high-performance composite solid-state electrolyte with enhanced ionic conductivity and mechanical properties10.1016/j.nxener.2025.100283 ↗
28. 3D printed solid polymer electrolytes with bicontinuous nanoscopic domains for ionic liquid conduction and energy storage10.1002/smll.202206639 ↗