Synergistic effects of dielectric polarization and ball-milling-induced structural evolution in graphite/TiO2 composite anodes for high-performance lithium-ion batteries
Source abstract
Abstract
Despite being the commercial standard anode for lithium-ion batteries (LIBs), graphite remains limited by sluggish fast-charging kinetics and gradual degradation during prolonged cycling. Here, artificial graphite was integrated with rutile TiO 2 particles of different sizes (30, 100, and 200 nm) via a high-energy ball-milling process, and the effects of TiO 2 size on structural evolution, dielectric polarization behavior, and electrochemical performance were systematically investigated. Among the three composites, G@R100 exhibited an optimal combination of structural refinement and polarization characteristics, showing the smallest in-plane crystallite size ( L a ), the highest saturation polarization (P s = 0.32 μC cm −2 ), and enhanced Li + transport kinetics. Notably, the reduction in stacking height ( L c ) was relatively insensitive to TiO 2 size. By contrast, the in-plane crystallite refinement and the polarization response both showed a clear optimum at 100 nm, indicating a coupled effect of ball-milling-induced structural evolution and particle-size-dependent polarization on Li + transport. As a result, G@R100 delivered a reversible capacity of 235.29 mAh g −1 at 10C and retained 87.24% of its capacity after 200 cycles. These findings demonstrate that particle-size-controlled incorporation of polarization-responsive TiO 2 , together with ball-milling-induced structural tuning, provides an effective strategy for improving both rate capability and long-term durability in graphite-based composite anodes.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Advancements in Battery Materials · Advanced Battery Materials and Technologies · Fiber-reinforced polymer composites
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (44)
Show source-provided references
1. Kinetic limits of graphite anode for fast-charging lithium-ion batteries10.1007/s40820-023-01183-6 ↗
2. A review on energy chemistry of fast-charging anodes10.1039/C9CS00728H ↗
3. Direct molecular evidence for desolvation-controlled lithium-ion insertion at graphite electrodes in highly concentrated electrolytes10.1021/acs.jpclett.5c02274 ↗
4. Fast charging of lithium‐ion batteries: a review of materials aspects10.1002/aenm.202101126 ↗
5. Lithium diffusion in graphitic carbon10.1021/jz100188d ↗
6. Titanium dioxide-based anode materials for lithium-ion batteries: structure and synthesis10.1039/D2RA05442F ↗
7. Ferroelectric-enhanced batteries for rapid charging and improved long-term performance10.1016/j.jmat.2024.05.013 ↗
8. Enhancing charge–discharge speed of Li-Ion batteries with BaTiO3-Coated LiCoO210.1149/1945-7111/ad92de ↗
9. Stabilizing high-voltage LiCoO2 cathodes with dielectric coating: insights into polarization-driven Li+ transport
10. Electron displacement polarization of high-dielectric constant fiber separators enhances interface stability10.1038/s41467-025-60256-9 ↗
11. Defect engineering on electrode materials for rechargeable batteries10.1002/adma.201905923 ↗
12. High-rate capabilities of ferroelectric BaTiO3-LiCoO2 composites with optimized BaTiO3 loading for Li-Ion batteries10.1149/2.0041512eel ↗
13. A study on high-rate performance of graphite nanostructures produced by ball milling as anode for lithium-ion batteries10.3390/mi14010191 ↗
14. Effect of atmosphere on the mechanical milling of natural graphite10.1016/S0008-6223(00)00064-6 ↗
15. Effect of ball-milling on the rate and cycle-life performance of graphite as negative electrodes in lithium-ion capacitors10.1016/j.electacta.2011.06.060 ↗
16. Lithium storage in disordered graphitic materials: a semi-quantitative study of the relationship between structure disordering and capacity10.1039/C4CP05589F ↗
17. Lithium insertion in ball-milled graphite10.1016/S0378-7753(98)00114-1 ↗
18. Green mechanochemical fabrication of graphite-lanthanide oxide nanocomposites10.1039/D4MR00085D ↗
19. Mechanism of Li+/electron conductivity in rutile and anatase TiO2 nanoparticles10.1021/jp107982c ↗
20. Investigating nanostructures in carbon fibres using Raman spectroscopy10.1016/j.carbon.2017.12.108 ↗
21. Raman spectroscopy study of the transformation of the carbonaceous skeleton of a polymer-based nanoporous carbon along the thermal annealing pathway10.1016/j.carbon.2014.12.098 ↗
22. Three-dimensionally ordered mesoporous carbons activated by hot ammonia treatment as high-performance anode materials in lithium-ion batteries10.1039/C5NJ00888C ↗
23. Mo-doped LiV3O8 nanorod-assembled nanosheets as a high performance cathode material for lithium ion batteries10.1039/C4TA05616G ↗
24. Polygonal multi-polymorphed Li4Ti5O12@rutile TiO2 as anodes in lithium-ion batteries10.1007/s12274-019-2320-0 ↗
25. LiC6 phase mobility in highly oriented pyrolytic graphite10.1149/1945-7111/adcda6 ↗
26. Practical application of graphite in lithium-ion batteries: modification, composite, and sustainable recycling10.1016/j.est.2024.113125 ↗
27. Impact of natural and synthetic graphite milling energy on lithium-ion electrode capacity and cycle life10.1016/j.carbon.2019.01.019 ↗
28. Structure transformation in graphite at high-energy ball milling treatment. Materials science
29. Identifying the association between surface heterogeneity and electrochemical properties in graphite10.3390/nano11071813 ↗
30. Introducing a pseudocapacitive lithium storage mechanism into graphite by defect engineering for fast-charging lithium-ion batteries10.1021/acsami.2c02169 ↗
31. Carbon nanotube‐reinforced dual carbon stress‐buffering for highly stable silicon anode material in lithium‐ion battery10.1002/smll.202300431 ↗
32. Improvement of rate capability by graphite foam anode for Li secondary batteries10.1016/j.jpowsour.2017.04.047 ↗
33. Tailoring hard-base sites on the Al current collector enables anode-free sodium–metal batteries10.1021/acsenergylett.5c01887 ↗
34. Anion‐reinforced solvation for a gradient inorganic‐rich interphase enables high‐rate and stable sodium batteries10.1002/anie.202205045 ↗
35. Anomalous P-E hysteresis loops of ferroelectric nanocomposites containing nanocellulose and hydrogen bonded ferroelectric of triglycine sulfate under influence of composition, temperature and moisture
36. Crystallite size dependence of lithium intercalation in nanocrystalline rutile10.1021/jp8087995 ↗
37. Nanocrystalline rutile TiO2 electrode for high-capacity and high-rate lithium storage10.1149/1.2712041 ↗
38. Theory of SEI formation in rechargeable batteries: capacity fade, accelerated aging and lifetime prediction10.1149/2.044302jes ↗
39. Extreme fast charge aging: effect of electrode loading and NMC composition on inhomogeneous degradation in graphite bulk and electrode/electrolyte interface10.1016/j.jpowsour.2022.232119 ↗
40. Micromechanisms of solid electrolyte interphase formation on electrochemically cycled graphite electrodes in lithium-ion cells10.1016/j.carbon.2012.07.009 ↗
41. Electrode scale and electrolyte transport effects on extreme fast charging of lithium-ion cells10.1016/j.electacta.2020.135854 ↗
42. Fast formation cycling for lithium ion batteries10.1016/j.jpowsour.2017.01.011 ↗
43. Analysis of vinylene carbonate (VC) as additive in Graphite/LiNi0.5Mn1.5O4 cells10.1149/2.1441712jes ↗
44. Investigation of the solid electrolyte interphase formation at graphite anodes in lithium-ion batteries with electrochemical impedance spectroscopy10.1016/j.electacta.2017.01.128 ↗